mbed Datalogger for KOHZU SC-410 4Axis Controller and Micrometer which has RS232C output p30 TRG IN: TRG OUT(Linked to pulse motor Axis CW/CCW PULSE) of SC-410 *needs change opendrain mode, and pull up to +3.3 or +5V* p13 TRG OUT: 50Hz output of TRIGGER to Micrometer p10 Serial RX:Micrometer RS232C output, *CMOS LEVEL,Converter needed* mbed HDK Serial :Coupling Pulse count and RS232C data output
mbed Datalogger Helper for KOHZU SC-410 4Axis Controller and Micrometer which has RS232C output.
Pin Assignment
- p30 TRG IN: TRG OUT(Linked to pulse motor Axis CW/CCW PULSE) of SC-410 *needs change opendrain mode, and pull up to +3.3 or +5V*
- p13 TRG OUT: 50Hz output of TRIGGER to Micrometer
- p10 Serial RX:Micrometer RS232C output, *CMOS LEVEL,Converter needed*
- mbed HDK Serial :Coupling Pulse count and RS232C data output
[SC-410 side] +---vvvv------- VU (mbed +5V) | ----|>o---------SC410TRG------+-------------- p13 | ----------------SC410GND------+-------------- GND (mbed GND) [Micrometer Side] OC Driver(or PhotoCoupler) p30 ----- |>o----- TRGIN (Micrometer) GND -------------- GND (if needed) p10 ------o<|----- RS232C TX LEVEL CONV(232C->CMOS)
mbed.bld
- Committer:
- mio
- Date:
- 2014-02-11
- Revision:
- 2:b3703b128b14
- Parent:
- 0:bfb59ebe2f4a
File content as of revision 2:b3703b128b14:
http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f