File content as of revision 172:65be27845400:

/**
 * \file
 *
 * \brief SAM W25 Xplained Pro board definition
 *
 * Copyright (c) 2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef SAMW25_XPLAINED_PRO_H_INCLUDED
#define SAMW25_XPLAINED_PRO_H_INCLUDED

#include <conf_board.h>
#include <compiler.h>

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \ingroup group_common_boards
 * \defgroup samd21_xplained_pro_group SAM D21 Xplained Pro board
 *
 * @{
 */

void system_board_init(void);

/**
 * \defgroup samd21_xplained_pro_features_group Features
 *
 * Symbols that describe features and capabilities of the board.
 *
 * @{
 */

/** Name string macro */
#define BOARD_NAME                "SAMW25_XPLAINED_PRO"

/** \name Resonator definitions
 *  @{ */
#define BOARD_FREQ_SLCK_XTAL      (32768U)
#define BOARD_FREQ_SLCK_BYPASS    (32768U)
#define BOARD_FREQ_MAINCK_XTAL    0 /* Not Mounted */
#define BOARD_FREQ_MAINCK_BYPASS  0 /* Not Mounted */
#define BOARD_MCK                 CHIP_FREQ_CPU_MAX
#define BOARD_OSC_STARTUP_US      15625
/** @} */

/** \name LED0 definitions
 *  @{ */
#define LED0_PIN                  PIN_PA23
#define LED0_ACTIVE               false
#define LED0_INACTIVE             !LED0_ACTIVE
/** @} */

/** \name SW0 definitions
 *  @{ */
#define SW0_PIN                   PIN_PB23
#define SW0_ACTIVE                false
#define SW0_INACTIVE              !SW0_ACTIVE
#define SW0_EIC_PIN               PIN_PB23A_EIC_EXTINT7
#define SW0_EIC_MUX               MUX_PA23A_EIC_EXTINT7
#define SW0_EIC_PINMUX            PINMUX_PA23A_EIC_EXTINT7
#define SW0_EIC_LINE              7
/** @} */

/**
 * \name LED #0 definitions
 *
 * Wrapper macros for LED0, to ensure common naming across all Xplained Pro
 * boards.
 *
 *  @{ */
#define LED_0_NAME                "LED0 (yellow)"
#define LED_0_PIN                 LED0_PIN
#define LED_0_ACTIVE              LED0_ACTIVE
#define LED_0_INACTIVE            LED0_INACTIVE
#define LED0_GPIO                 LED0_PIN
#define LED0                      LED0_PIN

#define LED_0_PWM_MODULE          TCC0
#define LED_0_PWM_CHANNEL         0
#define LED_0_PWM_OUTPUT          0
#define LED_0_PWM_PIN             PIN_PA23F_TCC0_WO5
#define LED_0_PWM_MUX             MUX_PA23F_TCC0_WO5
#define LED_0_PWM_PINMUX          PINMUX_PA23F_TCC0_WO5
/** @} */

/** Number of on-board LEDs */
#define LED_COUNT                 1


/**
 * \name Button #0 definitions
 *
 * Wrapper macros for SW0, to ensure common naming across all Xplained Pro
 * boards.
 *
 *  @{ */
#define BUTTON_0_NAME             "SW0"
#define BUTTON_0_PIN              SW0_PIN
#define BUTTON_0_ACTIVE           SW0_ACTIVE
#define BUTTON_0_INACTIVE         SW0_INACTIVE
#define BUTTON_0_EIC_PIN          SW0_EIC_PIN
#define BUTTON_0_EIC_MUX          SW0_EIC_MUX
#define BUTTON_0_EIC_PINMUX       SW0_EIC_PINMUX
#define BUTTON_0_EIC_LINE         SW0_EIC_LINE
/** @} */

/** Number of on-board buttons */
#define BUTTON_COUNT 1

/** \name Extension header #1 pin definitions
 *  @{
 */
#define EXT1_PIN_3                PIN_PA02
#define EXT1_PIN_4                PIN_PA03
#define EXT1_PIN_5                PIN_PB02
#define EXT1_PIN_6                PIN_PB03
#define EXT1_PIN_7                PIN_PA10
#define EXT1_PIN_8                PIN_PA11
#define EXT1_PIN_9                PIN_PA20
#define EXT1_PIN_10               PIN_PA21
#define EXT1_PIN_11               PIN_PA08
#define EXT1_PIN_12               PIN_PA09
#define EXT1_PIN_13               PIN_PB11
#define EXT1_PIN_14               PIN_PB10
#define EXT1_PIN_15               PIN_PA17
#define EXT1_PIN_16               PIN_PA18
#define EXT1_PIN_17               PIN_PA16
#define EXT1_PIN_18               PIN_PA19
/** @} */

/** \name Extension header #1 pin definitions by function
 *  @{
 */
#define EXT1_PIN_ADC_0            EXT1_PIN_3
#define EXT1_PIN_ADC_1            EXT1_PIN_4
#define EXT1_PIN_GPIO_0           EXT1_PIN_5
#define EXT1_PIN_GPIO_1           EXT1_PIN_6
#define EXT1_PIN_PWM_0            EXT1_PIN_7
#define EXT1_PIN_PWM_1            EXT1_PIN_8
#define EXT1_PIN_IRQ              EXT1_PIN_9
#define EXT1_PIN_I2C_SDA          EXT1_PIN_11
#define EXT1_PIN_I2C_SCL          EXT1_PIN_12
#define EXT1_PIN_UART_RX          EXT1_PIN_13
#define EXT1_PIN_UART_TX          EXT1_PIN_14
#define EXT1_PIN_SPI_SS_1         EXT1_PIN_10
#define EXT1_PIN_SPI_SS_0         EXT1_PIN_15
#define EXT1_PIN_SPI_MOSI         EXT1_PIN_16
#define EXT1_PIN_SPI_MISO         EXT1_PIN_17
#define EXT1_PIN_SPI_SCK          EXT1_PIN_18
/** @} */

/** \name Extension header #1 ADC definitions
 *  @{
 */
#define EXT1_ADC_MODULE           ADC
#define EXT1_ADC_0_CHANNEL        0
#define EXT1_ADC_0_PIN            PIN_PA02B_ADC_AIN0
#define EXT1_ADC_0_MUX            MUX_PA02B_ADC_AIN0
#define EXT1_ADC_0_PINMUX         PINMUX_PA02B_ADC_AIN0
#define EXT1_ADC_1_CHANNEL        1
#define EXT1_ADC_1_PIN            PIN_PA03B_ADC_AIN1
#define EXT1_ADC_1_MUX            MUX_PA03B_ADC_AIN1
#define EXT1_ADC_1_PINMUX         PINMUX_PA03B_ADC_AIN1
/** @} */

/** \name Extension header #1 PWM definitions
 *  @{
 */
#define EXT1_PWM_MODULE           TCC0
#define EXT1_PWM_0_CHANNEL        2
#define EXT1_PWM_0_PIN            PIN_PA10F_TCC0_WO2
#define EXT1_PWM_0_MUX            MUX_PA10F_TCC0_WO2
#define EXT1_PWM_0_PINMUX         PINMUX_PA10F_TCC0_WO2
#define EXT1_PWM_1_CHANNEL        3
#define EXT1_PWM_1_PIN            PIN_PA11F_TCC0_WO3
#define EXT1_PWM_1_MUX            MUX_PA11F_TCC0_WO3
#define EXT1_PWM_1_PINMUX         PINMUX_PA11F_TCC0_WO3
/** @} */

/** \name Extension header #1 IRQ/External interrupt definitions
 *  @{
 */
#define EXT1_IRQ_MODULE           EIC
#define EXT1_IRQ_INPUT            4
#define EXT1_IRQ_PIN              PIN_PA20A_EIC_EXTINT4
#define EXT1_IRQ_MUX              MUX_PA20A_EIC_EXTINT4
#define EXT1_IRQ_PINMUX           PINMUX_PA20A_EIC_EXTINT4
/** @} */

/** \name Extension header #1 I2C definitions
 *  @{
 */
#define EXT1_I2C_MODULE              SERCOM0
#define EXT1_I2C_SERCOM_PINMUX_PAD0  PINMUX_PA08C_SERCOM0_PAD0
#define EXT1_I2C_SERCOM_PINMUX_PAD1  PINMUX_PA09C_SERCOM0_PAD1
/** @} */

/** \name Extension header #1 UART definitions
 *  @{
 */
#define EXT1_UART_MODULE              SERCOM4
#define EXT1_UART_SERCOM_MUX_SETTING  USART_RX_3_TX_2_XCK_3
#define EXT1_UART_SERCOM_PINMUX_PAD0  PINMUX_UNUSED
#define EXT1_UART_SERCOM_PINMUX_PAD1  PINMUX_UNUSED
#define EXT1_UART_SERCOM_PINMUX_PAD2  PINMUX_PB10D_SERCOM4_PAD2
#define EXT1_UART_SERCOM_PINMUX_PAD3  PINMUX_PB11D_SERCOM4_PAD3
/** @} */

/** \name Extension header #1 SPI definitions
 *  @{
 */
#define EXT1_SPI_MODULE              SERCOM1
#define EXT1_SPI_SERCOM_MUX_SETTING  SPI_SIGNAL_MUX_SETTING_E
#define EXT1_SPI_SERCOM_PINMUX_PAD0  PINMUX_PA16C_SERCOM1_PAD0
#define EXT1_SPI_SERCOM_PINMUX_PAD1  PINMUX_PA17C_SERCOM1_PAD1
#define EXT1_SPI_SERCOM_PINMUX_PAD2  PINMUX_PA18C_SERCOM1_PAD2
#define EXT1_SPI_SERCOM_PINMUX_PAD3  PINMUX_PA19C_SERCOM1_PAD3

/** \name Extension header #3 pin definitions
 *  @{
 */
#define EXT3_PIN_3                PIN_PA04
#define EXT3_PIN_4                PIN_PA05
#define EXT3_PIN_5                PIN_PB22
#define EXT3_PIN_6                PIN_PB23
#define EXT3_PIN_7                PIN_PA22
#define EXT3_PIN_8                PIN_PA23
#define EXT3_PIN_9                PIN_PA06
#define EXT3_PIN_10               0
#define EXT3_PIN_11               PIN_PA08
#define EXT3_PIN_12               PIN_PA09
#define EXT3_PIN_13               PIN_PA01
#define EXT3_PIN_14               PIN_PA00
#define EXT3_PIN_15               PIN_PA07
#define EXT3_PIN_16               PIN_PA18
#define EXT3_PIN_17               PIN_PA16
#define EXT3_PIN_18               PIN_PA19
/** @} */

/** \name Extension header #3 pin definitions by function
 *  @{
 */
#define EXT3_PIN_ADC_0            EXT3_PIN_3
#define EXT3_PIN_ADC_1            EXT3_PIN_4
#define EXT3_PIN_GPIO_0           EXT3_PIN_5
#define EXT3_PIN_GPIO_1           EXT3_PIN_6
#define EXT3_PIN_PWM_0            EXT3_PIN_7
#define EXT3_PIN_PWM_1            EXT3_PIN_8
#define EXT3_PIN_IRQ              EXT3_PIN_9
#define EXT3_PIN_I2C_SDA          EXT3_PIN_11
#define EXT3_PIN_I2C_SCL          EXT3_PIN_12
#define EXT3_PIN_UART_RX          EXT3_PIN_13
#define EXT3_PIN_UART_TX          EXT3_PIN_14
#define EXT3_PIN_SPI_SS_0         EXT3_PIN_15
#define EXT3_PIN_SPI_MOSI         EXT3_PIN_16
#define EXT3_PIN_SPI_MISO         EXT3_PIN_17
#define EXT3_PIN_SPI_SCK          EXT3_PIN_18
/** @} */

/** \name Extension header #3 ADC definitions
 *  @{
 */
#define EXT3_ADC_MODULE           ADC
#define EXT3_ADC_0_CHANNEL        4
#define EXT3_ADC_0_PIN            PIN_PA04B_ADC_AIN4
#define EXT3_ADC_0_MUX            MUX_PA04B_ADC_AIN4
#define EXT3_ADC_0_PINMUX         PINMUX_PA04B_ADC_AIN4
#define EXT3_ADC_1_CHANNEL        5
#define EXT3_ADC_1_PIN            PIN_PA05B_ADC_AIN5
#define EXT3_ADC_1_MUX            MUX_PA05B_ADC_AIN5
#define EXT3_ADC_1_PINMUX         PINMUX_PA05B_ADC_AIN5
/** @} */

/** \name Extension header #3 PWM definitions
 *  @{
 */
#define EXT3_PWM_MODULE           TC4
#define EXT3_PWM_0_CHANNEL        0
#define EXT3_PWM_0_PIN            PIN_PA22E_TC4_WO0
#define EXT3_PWM_0_MUX            MUX_PA22E_TC4_WO0
#define EXT3_PWM_0_PINMUX         PINMUX_PA22E_TC4_WO0
#define EXT3_PWM_1_CHANNEL        1
#define EXT3_PWM_1_PIN            PIN_PA23E_TC4_WO1
#define EXT3_PWM_1_MUX            MUX_PA23E_TC4_WO1
#define EXT3_PWM_1_PINMUX         PINMUX_PA23E_TC4_WO1
/** @} */

/** \name Extension header #3 IRQ/External interrupt definitions
 *  @{
 */
#define EXT3_IRQ_MODULE           EIC
#define EXT3_IRQ_INPUT            6
#define EXT3_IRQ_PIN              PIN_PA06A_EIC_EXTINT6
#define EXT3_IRQ_MUX              MUX_PA06A_EIC_EXTINT6
#define EXT3_IRQ_PINMUX           PINMUX_PA06A_EIC_EXTINT6
/** @} */

/** \name Extension header #3 I2C definitions
 *  @{
 */
#define EXT3_I2C_MODULE              SERCOM0
#define EXT3_I2C_SERCOM_PINMUX_PAD0  PINMUX_PA08C_SERCOM0_PAD0
#define EXT3_I2C_SERCOM_PINMUX_PAD1  PINMUX_PA09C_SERCOM0_PAD1
/** @} */

/** \name Extension header #3 UART definitions
 *  @{
 */
#define EXT3_UART_MODULE              SERCOM1
#define EXT3_UART_SERCOM_MUX_SETTING  USART_RX_1_TX_0_XCK_1
#define EXT3_UART_SERCOM_PINMUX_PAD0  PINMUX_PA00D_SERCOM1_PAD0
#define EXT3_UART_SERCOM_PINMUX_PAD1  PINMUX_PA01D_SERCOM1_PAD1
#define EXT3_UART_SERCOM_PINMUX_PAD2  PINMUX_UNUSED
#define EXT3_UART_SERCOM_PINMUX_PAD3  PINMUX_UNUSED
/** @} */

/** \name Extension header #3 SPI definitions
 *  @{
 */
#define EXT3_SPI_MODULE              SERCOM1
#define EXT3_SPI_SERCOM_MUX_SETTING  SPI_SIGNAL_MUX_SETTING_E
#define EXT3_SPI_SERCOM_PINMUX_PAD0  PINMUX_PA16C_SERCOM1_PAD0
#define EXT3_SPI_SERCOM_PINMUX_PAD1  PINMUX_UNUSED /* PA07 */
#define EXT3_SPI_SERCOM_PINMUX_PAD2  PINMUX_PA18C_SERCOM1_PAD2
#define EXT3_SPI_SERCOM_PINMUX_PAD3  PINMUX_PA19C_SERCOM1_PAD3
/** @} */

/** \name Extension header #3 Dataflash
 *  @{
 */
#define EXT3_DATAFLASH_SPI_MODULE      EXT3_SPI_MODULE
#define EXT3_DATAFLASH_SPI_MUX_SETTING EXT3_SPI_SERCOM_MUX_SETTING
#define EXT3_DATAFLASH_SPI_PINMUX_PAD0 EXT3_SPI_SERCOM_PINMUX_PAD0
#define EXT3_DATAFLASH_SPI_PINMUX_PAD1 EXT3_SPI_SERCOM_PINMUX_PAD1
#define EXT3_DATAFLASH_SPI_PINMUX_PAD2 EXT3_SPI_SERCOM_PINMUX_PAD2
#define EXT3_DATAFLASH_SPI_PINMUX_PAD3 EXT3_SPI_SERCOM_PINMUX_PAD3
/** @} */

/** \name USB definitions
 * @{
 */
#define USB_ID
#define USB_TARGET_DP_PIN            PIN_PA25G_USB_DP
#define USB_TARGET_DP_MUX            MUX_PA25G_USB_DP
#define USB_TARGET_DP_PINMUX         PINMUX_PA25G_USB_DP
#define USB_TARGET_DM_PIN            PIN_PA24G_USB_DM
#define USB_TARGET_DM_MUX            MUX_PA24G_USB_DM
#define USB_TARGET_DM_PINMUX         PINMUX_PA24G_USB_DM
#define USB_VBUS_PIN                 PIN_PA05
#define USB_VBUS_EIC_LINE            5
#define USB_VBUS_EIC_MUX             MUX_PA05A_EIC_EXTINT5
#define USB_VBUS_EIC_PINMUX          PINMUX_PA05A_EIC_EXTINT5
#define USB_ID_PIN                   PIN_PA04
#define USB_ID_EIC_LINE              4
#define USB_ID_EIC_MUX               MUX_PA04A_EIC_EXTINT4
#define USB_ID_EIC_PINMUX            PINMUX_PA04A_EIC_EXTINT4
/** @} */

/** \name Embedded debugger GPIO interface definitions
 * @{
 */
#define EDBG_GPIO0_PIN            PIN_PB22
#define EDBG_GPIO1_PIN            PIN_PB23
#define EDBG_GPIO2_PIN            PIN_PA22
#define EDBG_GPIO3_PIN            PIN_PA24
/** @} */

/** \name Embedded debugger USART interface definitions
 * @{
 */
#define EDBG_UART_MODULE          -1 /* Not available on this board */
#define EDBG_UART_RX_PIN          -1 /* Not available on this board */
#define EDBG_UART_RX_MUX          -1 /* Not available on this board */
#define EDBG_UART_RX_PINMUX       -1 /* Not available on this board */
#define EDBG_UART_RX_SERCOM_PAD   -1 /* Not available on this board */
#define EDBG_UART_TX_PIN          -1 /* Not available on this board */
#define EDBG_UART_TX_MUX          -1 /* Not available on this board */
#define EDBG_UART_TX_PINMUX       -1 /* Not available on this board */
#define EDBG_UART_TX_SERCOM_PAD   -1 /* Not available on this board */
/** @} */

/** \name Embedded debugger I2C interface definitions
 * @{
 */
#define EDBG_I2C_MODULE              SERCOM0
#define EDBG_I2C_SERCOM_PINMUX_PAD0  PINMUX_PA08C_SERCOM0_PAD0
#define EDBG_I2C_SERCOM_PINMUX_PAD1  PINMUX_PA09C_SERCOM0_PAD1
/** @} */

/** \name Embedded debugger SPI interface definitions
 * @{
 */
#define EDBG_SPI_MODULE              SERCOM1
#define EDBG_SPI_SERCOM_MUX_SETTING  SPI_SIGNAL_MUX_SETTING_E
#define EDBG_SPI_SERCOM_PINMUX_PAD0  PINMUX_PA16C_SERCOM1_PAD0
#define EDBG_SPI_SERCOM_PINMUX_PAD1  PINMUX_UNUSED /* PA_06 */
#define EDBG_SPI_SERCOM_PINMUX_PAD2  PINMUX_PA18C_SERCOM1_PAD2
#define EDBG_SPI_SERCOM_PINMUX_PAD3  PINMUX_PA19C_SERCOM1_PAD3
/** @} */

/** \name Embedded debugger CDC Gateway USART interface definitions
 * @{
 */
#define EDBG_CDC_MODULE              SERCOM4
#define EDBG_CDC_SERCOM_MUX_SETTING  USART_RX_3_TX_2_XCK_3
#define EDBG_CDC_SERCOM_PINMUX_PAD0  PINMUX_UNUSED
#define EDBG_CDC_SERCOM_PINMUX_PAD1  PINMUX_UNUSED
#define EDBG_CDC_SERCOM_PINMUX_PAD2  PINMUX_PB10D_SERCOM4_PAD2
#define EDBG_CDC_SERCOM_PINMUX_PAD3  PINMUX_PB11D_SERCOM4_PAD3
/** @} */

/** @} */

/** \name 802.15.4 TRX Interface definitions
 * @{
 */

#define AT86RFX_SPI                  EXT1_SPI_MODULE
#define AT86RFX_RST_PIN              EXT1_PIN_7
#define AT86RFX_MISC_PIN             EXT1_PIN_12
#define AT86RFX_IRQ_PIN              EXT1_PIN_9
#define AT86RFX_SLP_PIN              EXT1_PIN_10
#define AT86RFX_SPI_CS               EXT1_PIN_15
#define AT86RFX_SPI_MOSI             EXT1_PIN_16
#define AT86RFX_SPI_MISO             EXT1_PIN_17
#define AT86RFX_SPI_SCK              EXT1_PIN_18
#define AT86RFX_CSD                  EXT1_PIN_5
#define AT86RFX_CPS                  EXT1_PIN_8

#define AT86RFX_SPI_SERCOM_MUX_SETTING   EXT1_SPI_SERCOM_MUX_SETTING
#define AT86RFX_SPI_SERCOM_PINMUX_PAD0   EXT1_SPI_SERCOM_PINMUX_PAD0
#define AT86RFX_SPI_SERCOM_PINMUX_PAD1   PINMUX_UNUSED
#define AT86RFX_SPI_SERCOM_PINMUX_PAD2   EXT1_SPI_SERCOM_PINMUX_PAD2
#define AT86RFX_SPI_SERCOM_PINMUX_PAD3   EXT1_SPI_SERCOM_PINMUX_PAD3

#define AT86RFX_IRQ_CHAN       EXT1_IRQ_INPUT
#define AT86RFX_IRQ_PINMUX     EXT1_IRQ_PINMUX


/** Enables the transceiver main interrupt. */
#define ENABLE_TRX_IRQ()

/** Disables the transceiver main interrupt. */
#define DISABLE_TRX_IRQ()

/** Clears the transceiver main interrupt. */
#define CLEAR_TRX_IRQ()

/*
 * This macro saves the trx interrupt status and disables the trx interrupt.
 */
#define ENTER_TRX_REGION()

/*
 *  This macro restores the transceiver interrupt status
 */
#define LEAVE_TRX_REGION()

/** @} */

/**
 * \brief Turns off the specified LEDs.
 *
 * \param led_gpio LED to turn off (LEDx_GPIO).
 *
 * \note The pins of the specified LEDs are set to GPIO output mode.
 */
#define LED_Off(led_gpio)     port_pin_set_output_level(led_gpio,true)

/**
 * \brief Turns on the specified LEDs.
 *
 * \param led_gpio LED to turn on (LEDx_GPIO).
 *
 * \note The pins of the specified LEDs are set to GPIO output mode.
 */
#define LED_On(led_gpio)      port_pin_set_output_level(led_gpio,false)

/**
 * \brief Toggles the specified LEDs.
 *
 * \param led_gpio LED to toggle (LEDx_GPIO).
 *
 * \note The pins of the specified LEDs are set to GPIO output mode.
 */
#define LED_Toggle(led_gpio)  port_pin_toggle_output_level(led_gpio)

#ifdef __cplusplus
}
#endif

#endif  /* SAMW25_XPLAINED_PRO_H_INCLUDED */