File content as of revision 84:f54042cbc282:

/**
  ******************************************************************************
  * @file    stm32f10x_pwr.c
  * @author  MCD Application Team
  * @version V3.6.1
  * @date    05-March-2012
  * @brief   This file provides all the PWR firmware functions.
 *******************************************************************************
 * Copyright (c) 2014, STMicroelectronics
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_pwr.h"
#include "stm32f10x_rcc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */

/** @defgroup PWR 
  * @brief PWR driver modules
  * @{
  */ 

/** @defgroup PWR_Private_TypesDefinitions
  * @{
  */

/**
  * @}
  */

/** @defgroup PWR_Private_Defines
  * @{
  */

/* --------- PWR registers bit address in the alias region ---------- */
#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)

/* --- CR Register ---*/

/* Alias word address of DBP bit */
#define CR_OFFSET                (PWR_OFFSET + 0x00)
#define DBP_BitNumber            0x08
#define CR_DBP_BB                (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))

/* Alias word address of PVDE bit */
#define PVDE_BitNumber           0x04
#define CR_PVDE_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))

/* --- CSR Register ---*/

/* Alias word address of EWUP bit */
#define CSR_OFFSET               (PWR_OFFSET + 0x04)
#define EWUP_BitNumber           0x08
#define CSR_EWUP_BB              (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))

/* ------------------ PWR registers bit mask ------------------------ */

/* CR register bit mask */
#define CR_DS_MASK               ((uint32_t)0xFFFFFFFC)
#define CR_PLS_MASK              ((uint32_t)0xFFFFFF1F)


/**
  * @}
  */

/** @defgroup PWR_Private_Macros
  * @{
  */

/**
  * @}
  */

/** @defgroup PWR_Private_Variables
  * @{
  */

/**
  * @}
  */

/** @defgroup PWR_Private_FunctionPrototypes
  * @{
  */

/**
  * @}
  */

/** @defgroup PWR_Private_Functions
  * @{
  */

/**
  * @brief  Deinitializes the PWR peripheral registers to their default reset values.
  * @param  None
  * @retval None
  */
void PWR_DeInit(void)
{
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
}

/**
  * @brief  Enables or disables access to the RTC and backup registers.
  * @param  NewState: new state of the access to the RTC and backup registers.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_BackupAccessCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
}

/**
  * @brief  Enables or disables the Power Voltage Detector(PVD).
  * @param  NewState: new state of the PVD.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_PVDCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
}

/**
  * @brief  Configures the voltage threshold detected by the Power Voltage Detector(PVD).
  * @param  PWR_PVDLevel: specifies the PVD detection level
  *   This parameter can be one of the following values:
  *     @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
  *     @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
  *     @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
  *     @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
  *     @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
  *     @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
  *     @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
  *     @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
  * @retval None
  */
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
{
  uint32_t tmpreg = 0;
  /* Check the parameters */
  assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
  tmpreg = PWR->CR;
  /* Clear PLS[7:5] bits */
  tmpreg &= CR_PLS_MASK;
  /* Set PLS[7:5] bits according to PWR_PVDLevel value */
  tmpreg |= PWR_PVDLevel;
  /* Store the new value */
  PWR->CR = tmpreg;
}

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  NewState: new state of the WakeUp Pin functionality.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
}

/**
  * @brief  Enters STOP mode.
  * @param  PWR_Regulator: specifies the regulator state in STOP mode.
  *   This parameter can be one of the following values:
  *     @arg PWR_Regulator_ON: STOP mode with regulator ON
  *     @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
  * @param  PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
  *   This parameter can be one of the following values:
  *     @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
  *     @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
  * @retval None
  */
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
{
  uint32_t tmpreg = 0;
  /* Check the parameters */
  assert_param(IS_PWR_REGULATOR(PWR_Regulator));
  assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
  
  /* Select the regulator state in STOP mode ---------------------------------*/
  tmpreg = PWR->CR;
  /* Clear PDDS and LPDS bits */
  tmpreg &= CR_DS_MASK;
  /* Set LPDS bit according to PWR_Regulator value */
  tmpreg |= PWR_Regulator;
  /* Store the new value */
  PWR->CR = tmpreg;
  /* Set SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR |= SCB_SCR_SLEEPDEEP;
  
  /* Select STOP mode entry --------------------------------------------------*/
  if(PWR_STOPEntry == PWR_STOPEntry_WFI)
  {   
    /* Request Wait For Interrupt */
    __WFI();
  }
  else
  {
    /* Request Wait For Event */
    __WFE();
  }
  
  /* Reset SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);  
}

/**
  * @brief  Enters STANDBY mode.
  * @param  None
  * @retval None
  */
void PWR_EnterSTANDBYMode(void)
{
  /* Clear Wake-up flag */
  PWR->CR |= PWR_CR_CWUF;
  /* Select STANDBY mode */
  PWR->CR |= PWR_CR_PDDS;
  /* Set SLEEPDEEP bit of Cortex System Control Register */
  SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM   )
  __force_stores();
#endif
  /* Request Wait For Interrupt */
  __WFI();
}

/**
  * @brief  Checks whether the specified PWR flag is set or not.
  * @param  PWR_FLAG: specifies the flag to check.
  *   This parameter can be one of the following values:
  *     @arg PWR_FLAG_WU: Wake Up flag
  *     @arg PWR_FLAG_SB: StandBy flag
  *     @arg PWR_FLAG_PVDO: PVD Output
  * @retval The new state of PWR_FLAG (SET or RESET).
  */
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
{
  FlagStatus bitstatus = RESET;
  /* Check the parameters */
  assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
  
  if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  /* Return the flag status */
  return bitstatus;
}

/**
  * @brief  Clears the PWR's pending flags.
  * @param  PWR_FLAG: specifies the flag to clear.
  *   This parameter can be one of the following values:
  *     @arg PWR_FLAG_WU: Wake Up flag
  *     @arg PWR_FLAG_SB: StandBy flag
  * @retval None
  */
void PWR_ClearFlag(uint32_t PWR_FLAG)
{
  /* Check the parameters */
  assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
         
  PWR->CR |=  PWR_FLAG << 2;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/