File content as of revision 610:813dcc80987e:

/**
  ******************************************************************************
  * @file    stm32l4xx_hal_tim_ex.h
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    26-June-2015
  * @brief   Header file of TIM HAL Extended module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_HAL_TIM_EX_H
#define __STM32L4xx_HAL_TIM_EX_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal_def.h"

/** @addtogroup STM32L4xx_HAL_Driver
  * @{
  */

/** @addtogroup TIMEx
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/ 
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
  * @{
  */

/** 
  * @brief  TIM Hall sensor Configuration Structure definition  
  */

typedef struct
{
                                  
  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
                                                                   
  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
                                  
  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  

  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */                              
} TIM_HallSensor_InitTypeDef;

/** 
  * @brief  TIM Break/Break2 input configuration   
  */
typedef struct {
  uint32_t Source;         /*!< Specifies the source of the timer break input.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source */
  uint32_t Enable;         /*!< Specifies whether or not the break input source is enabled.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
  uint32_t Polarity;       /*!< Specifies the break input source polarity.
                                This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
                                Not relevant when analog watchdog output of the DFSDM used as break input source */
} TIMEx_BreakInputConfigTypeDef;

/**
  * @}
  */
/* End of exported types -----------------------------------------------------*/ 

/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
  * @{
  */

/** @defgroup TIMEx_Remap TIM  Extended Remapping
  * @{
  */
#define TIM_TIM1_ETR_ADC1_NONE      ((uint32_t)(0x00000000))                              /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
#define TIM_TIM1_ETR_ADC1_AWD1      (TIM1_OR1_ETR_ADC1_RMP_0)                             /* !< TIM1_ETR is connected to ADC1 AWD1 */
#define TIM_TIM1_ETR_ADC1_AWD2      (TIM1_OR1_ETR_ADC1_RMP_1)                             /* !< TIM1_ETR is connected to ADC1 AWD2 */
#define TIM_TIM1_ETR_ADC1_AWD3      (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0)   /* !< TIM1_ETR is connected to ADC1 AWD3 */
#define TIM_TIM1_ETR_ADC3_NONE      ((uint32_t)(0x00000000))                              /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
#define TIM_TIM1_ETR_ADC3_AWD1      (TIM1_OR1_ETR_ADC3_RMP_0)                             /* !< TIM1_ETR is connected to ADC3 AWD1 */
#define TIM_TIM1_ETR_ADC3_AWD2      (TIM1_OR1_ETR_ADC3_RMP_1)                             /* !< TIM1_ETR is connected to ADC3 AWD2 */
#define TIM_TIM1_ETR_ADC3_AWD3      (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0)   /* !< TIM1_ETR is connected to ADC3 AWD3 */
#define TIM_TIM1_TI1_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM1 TI1 is connected to GPIO */
#define TIM_TIM1_TI1_COMP1          (TIM1_OR1_TI1_RMP)                                    /* !< TIM1 TI1 is connected to COMP1 */
#define TIM_TIM1_ETR_COMP1          (TIM1_OR2_ETRSEL_0)                                   /* !< TIM1_ETR is connected to COMP1 output */
#define TIM_TIM1_ETR_COMP2          (TIM1_OR2_ETRSEL_1)                                   /* !< TIM1_ETR is connected to COMP2 output */
#define TIM_TIM2_ITR1_TIM8_TRGO     ((uint32_t)(0x00000000))                              /* !< TIM2_ITR1 is connected to TIM8_TRGO */
#define TIM_TIM2_ITR1_OTG_FS_SOF    (TIM2_OR1_ITR1_RMP)                                   /* !< TIM2_ITR1 is connected to OTG_FS SOF */
#define TIM_TIM2_ETR_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM2_ETR is connected to GPIO */
#define TIM_TIM2_ETR_LSE            (TIM2_OR1_ETR1_RMP)                                   /* !< TIM2_ETR is connected to LSE */
#define TIM_TIM2_ETR_COMP1          (TIM2_OR2_ETRSEL_0)                                   /* !< TIM2_ETR is connected to COMP1 output */
#define TIM_TIM2_ETR_COMP2          (TIM2_OR2_ETRSEL_1)                                   /* !< TIM2_ETR is connected to COMP2 output */
#define TIM_TIM2_TI4_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM2 TI4 is connected to GPIO */
#define TIM_TIM2_TI4_COMP1          (TIM2_OR1_TI4_RMP_0)                                  /* !< TIM2 TI4 is connected to COMP1 output */
#define TIM_TIM2_TI4_COMP2          (TIM2_OR1_TI4_RMP_1)                                  /* !< TIM2 TI4 is connected to COMP2 output */
#define TIM_TIM2_TI4_COMP1_COMP2    (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0)              /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */
#define TIM_TIM3_TI1_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM3 TI1 is connected to GPIO */
#define TIM_TIM3_TI1_COMP1          (TIM3_OR1_TI1_RMP_0)                                  /* !< TIM3 TI1 is connected to COMP1 output */
#define TIM_TIM3_TI1_COMP2          (TIM3_OR1_TI1_RMP_1)                                  /* !< TIM3 TI1 is connected to COMP2 output */
#define TIM_TIM3_TI1_COMP1_COMP2    (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0)             /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */
#define TIM_TIM3_ETR_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM3_ETR is connected to GPIO */
#define TIM_TIM3_ETR_COMP1          (TIM3_OR2_ETRSEL_0)                                   /* !< TIM3_ETR is connected to COMP1 output */
#define TIM_TIM8_ETR_ADC2_NONE      ((uint32_t)(0x00000000))                              /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
#define TIM_TIM8_ETR_ADC2_AWD1      (TIM8_OR1_ETR_ADC2_RMP_0)                             /* !< TIM8_ETR is connected to ADC2 AWD1 */
#define TIM_TIM8_ETR_ADC2_AWD2      (TIM8_OR1_ETR_ADC2_RMP_1)                             /* !< TIM8_ETR is connected to ADC2 AWD2 */
#define TIM_TIM8_ETR_ADC2_AWD3      (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0)   /* !< TIM8_ETR is connected to ADC2 AWD3 */
#define TIM_TIM8_ETR_ADC3_NONE      ((uint32_t)(0x00000000))                              /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
#define TIM_TIM8_ETR_ADC3_AWD1      (TIM8_OR1_ETR_ADC3_RMP_0)                             /* !< TIM8_ETR is connected to ADC3 AWD1 */
#define TIM_TIM8_ETR_ADC3_AWD2      (TIM8_OR1_ETR_ADC3_RMP_1)                             /* !< TIM8_ETR is connected to ADC3 AWD2 */
#define TIM_TIM8_ETR_ADC3_AWD3      (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0)   /* !< TIM8_ETR is connected to ADC3 AWD3 */
#define TIM_TIM8_TI1_GPIO           ((uint32_t)(0x00000000))                              /* !< TIM8 TI1 is connected to GPIO */
#define TIM_TIM8_TI1_COMP2          (TIM8_OR1_TI1_RMP)                                    /* !< TIM8 TI1 is connected to COMP1 */
#define TIM_TIM8_ETR_COMP1          (TIM8_OR2_ETRSEL_0)                                   /* !< TIM8_ETR is connected to COMP1 output */
#define TIM_TIM8_ETR_COMP2          (TIM8_OR2_ETRSEL_1)                                   /* !< TIM8_ETR is connected to COMP2 output */
#define TIM_TIM15_TI1_GPIO          ((uint32_t)(0x00000000))                              /* !< TIM15 TI1 is connected to GPIO */
#define TIM_TIM15_TI1_LSE           (TIM15_OR1_TI1_RMP)                                   /* !< TIM15 TI1 is connected to LSE */
#define TIM_TIM15_ENCODERMODE_NONE  ((uint32_t)(0x00000000))                              /* !< No redirection */
#define TIM_TIM15_ENCODERMODE_TIM2  (TIM15_OR1_ENCODER_MODE_0)                            /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
#define TIM_TIM15_ENCODERMODE_TIM3  (TIM15_OR1_ENCODER_MODE_1)                            /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
#define TIM_TIM15_ENCODERMODE_TIM4  (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
#define TIM_TIM16_TI1_GPIO          ((uint32_t)(0x00000000))                              /* !< TIM16 TI1 is connected to GPIO */
#define TIM_TIM16_TI1_LSI           (TIM16_OR1_TI1_RMP_0)                                 /* !< TIM16 TI1 is connected to LSI */
#define TIM_TIM16_TI1_LSE           (TIM16_OR1_TI1_RMP_1)                                 /* !< TIM16 TI1 is connected to LSE */
#define TIM_TIM16_TI1_RTC           (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0)           /* !< TIM16 TI1 is connected to RTC wakeup interrupt */
#define TIM_TIM17_TI1_GPIO          ((uint32_t)(0x00000000))                              /* !< TIM17 TI1 is connected to GPIO */
#define TIM_TIM17_TI1_MSI           (TIM17_OR1_TI1_RMP_0)                                 /* !< TIM17 TI1 is connected to MSI */
#define TIM_TIM17_TI1_HSE_32        (TIM17_OR1_TI1_RMP_1)                                 /* !< TIM17 TI1 is connected to HSE div 32 */
#define TIM_TIM17_TI1_MCO           (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0)           /* !< TIM17 TI1 is connected to MCO */
/**
  * @}
  */ 

/** @defgroup TIMEx_Break_Input TIM  Extended Break input
  * @{
  */
#define TIM_BREAKINPUT_BRK     ((uint32_t)(0x00000001)) /* !< Timer break input  */
#define TIM_BREAKINPUT_BRK2    ((uint32_t)(0x00000002)) /* !< Timer break2 input */
/**
  * @}
  */ 

/** @defgroup TIMEx_Break_Input_Source TIM  Extended Break input source
  * @{
  */
#define TIM_BREAKINPUTSOURCE_BKIN     ((uint32_t)(0x00000001)) /* !< An external source (GPIO) is connected to the BKIN pin  */
#define TIM_BREAKINPUTSOURCE_COMP1    ((uint32_t)(0x00000002)) /* !< The COMP1 output is connected to the break input */
#define TIM_BREAKINPUTSOURCE_COMP2    ((uint32_t)(0x00000004)) /* !< The COMP2 output is connected to the break input */
#define TIM_BREAKINPUTSOURCE_DFSDM    ((uint32_t)(0x00000008)) /* !< The analog watchdog output of the DFSDM peripheral is connected to the break input */
/**
  * @}
  */ 

/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
  * @{
  */
#define TIM_BREAKINPUTSOURCE_DISABLE     ((uint32_t)(0x00000000)) /* !< Break input source is disabled */
#define TIM_BREAKINPUTSOURCE_ENABLE      ((uint32_t)(0x00000001)) /* !< Break input source is enabled */
/**
  * @}
  */ 

/** @defgroup TIMEx_Break_Input_Source_Polarity TIM  Extended Break input polarity
  * @{
  */
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW     ((uint32_t)(0x00000001)) /* !< Break input source is active low */
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH    ((uint32_t)(0x00000000)) /* !< Break input source is active_high */
/**
  * @}
  */ 
   
/**
  * @}
  */ 
/* End of exported constants -------------------------------------------------*/

/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
  * @{
  */  

/**
  * @}
  */ 
/* End of exported macro -----------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
  * @{
  */  
#define IS_TIM_REMAP(__REMAP__)    (((__REMAP__) <= (uint32_t)0x0001C01F))

#define IS_TIM_BREAKINPUT(__BREAKINPUT__)  (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK)  || \
                                            ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))

#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__)  (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)  || \
                                              ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
                                              ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
                                              ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))

#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__)  (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE)  || \
                                                   ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))

#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__)  (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW)  || \
                                                         ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
/**
  * @}
  */ 
/* End of private macro ------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
  * @{
  */

/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions 
 *  @brief    Timer Hall Sensor functions
 * @{
 */
/*  Timer Hall Sensor functions  **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);

void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);

 /* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
 *  @brief   Timer Complementary Output Compare functions
 * @{
 */
/*  Timer Complementary Output Compare functions  *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
 *  @brief    Timer Complementary PWM functions
 * @{
 */
/*  Timer Complementary PWM functions  ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
 *  @brief    Timer Complementary One Pulse functions
 * @{
 */
/*  Timer Complementary One Pulse functions  **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
 *  @brief    Peripheral Control functions
 * @{
 */
/* Extended Control functions  ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);

/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions 
  * @brief    Extended Callbacks functions
  * @{
  */
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions 
  * @brief    Extended Peripheral State functions
  * @{
  */
/* Extended Peripheral State functions  ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/**
  * @}
  */ 
/* End of exported functions -------------------------------------------------*/

/* Private functions----------------------------------------------------------*/
/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/ 
/* End of private functions --------------------------------------------------*/

/**
  * @}
  */ 

/**
  * @}
  */
  
#ifdef __cplusplus
}
#endif


#endif /* __STM32L4xx_HAL_TIM_EX_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/