mbed library sources

Dependents:   Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more

Superseded

This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.

Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.

If you are looking for a stable and tested release, please import one of the official mbed library releases:

Import librarymbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

targets/hal/TARGET_NXP/TARGET_LPC11U6X/gpio_api.c

Committer:
mbed_official
Date:
2015-07-13
Revision:
588:523654f2b367
Parent:
398:7a7127adb6e8

File content as of revision 588:523654f2b367:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2014 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "mbed_assert.h"
#include "gpio_api.h"
#include "pinmap.h"

static int  gpio_enabled = 0;

static void gpio_enable(void) {
    gpio_enabled = 1;
    
    /* Enable AHB clock to the GPIO and IOCON domain. */
    LPC_SYSCON->SYSAHBCLKCTRL |= ((1 << 16) | (1 << 6));
}

uint32_t gpio_set(PinName pin) {
    MBED_ASSERT(pin != (PinName)NC);
    if (!gpio_enabled)
         gpio_enable();
    
    int func = ((pin == P0_0)  || // reset
                (pin == P0_10) || // SWCLK
                (pin == P0_11) || // TDI
                (pin == P0_12) || // TMS
                (pin == P0_13) || // TDO
                (pin == P0_14) || // TRST
                (pin == P0_15)) ? (1) : (0); // SWDIO
    
    pin_function(pin, func);
    
    return (1UL << ((int)pin >> PIN_SHIFT & 0x1F));
}

void gpio_init(gpio_t *obj, PinName pin) {
    obj->pin = pin;
    if (pin == (PinName)NC)
        return;

    obj->mask = gpio_set(pin);
    
    unsigned int port = (unsigned int)(pin >> PORT_SHIFT);

    obj->reg_set = &LPC_GPIO_PORT->SET[port];
    obj->reg_clr = &LPC_GPIO_PORT->CLR[port];
    obj->reg_in  = &LPC_GPIO_PORT->PIN[port];
    obj->reg_dir = &LPC_GPIO_PORT->DIR[port];
}

void gpio_mode(gpio_t *obj, PinMode mode) {
    pin_mode(obj->pin, mode);
}

void gpio_dir(gpio_t *obj, PinDirection direction) {
    MBED_ASSERT(obj->pin != (PinName)NC);
    switch (direction) {
        case PIN_INPUT :
            *obj->reg_dir &= ~obj->mask;
            break;
        case PIN_OUTPUT:
            *obj->reg_dir |=  obj->mask;
            break;
    }
}