File content as of revision 577:15494b56c2f3:

/**************************************************
 *
 * Copyright 2010 IAR Systems. All rights reserved.
 *
 * $Revision: 16 $
 *
 **************************************************/

;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;

        MODULE  ?cstartup

        ;; Forward declaration of sections.
        SECTION CSTACK:DATA:NOROOT(3)

        SECTION .intvec:CODE:ROOT(2)

        EXTERN  __iar_program_start
        EXTERN SystemInit
        PUBLIC  __vector_table

        DATA
__vector_table
        DCD     sfe(CSTACK)               ; Top of Stack
        DCD     Reset_Handler       ; Reset Handler
        DCD     NMI_Handler               ; NMI Handler
        DCD     HardFault_Handler         ; Hard Fault Handler
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     SVC_Handler               ; SVCall Handler
        DCD     0                         ; Reserved
        DCD     0                         ; Reserved
        DCD     PendSV_Handler            ; PendSV Handler
        DCD     SysTick_Handler           ; SysTick Handler
        ; External Interrupts
        DCD     DMA0_IRQHandler  ; DMA channel 0 transfer complete/error interrupt
        DCD     DMA1_IRQHandler  ; DMA channel 1 transfer complete/error interrupt
        DCD     DMA2_IRQHandler  ; DMA channel 2 transfer complete/error interrupt
        DCD     DMA3_IRQHandler  ; DMA channel 3 transfer complete/error interrupt
        DCD     0                         ; Reserved
        DCD     FTFA_IRQHandler  ; FTFA command complete/read collision interrupt
        DCD     LVD_LVW_IRQHandler  ; Low Voltage Detect, Low Voltage Warning
        DCD     LLW_IRQHandler  ; Low Leakage Wakeup
        DCD     I2C0_IRQHandler  ; I2C0 interrupt
        DCD     I2C1_IRQHandler  ; I2C0 interrupt 25
        DCD     SPI0_IRQHandler  ; SPI0 interrupt
        DCD     SPI1_IRQHandler  ; SPI1 interrupt
        DCD     UART0_IRQHandler  ; UART0 status/error interrupt
        DCD     UART1_IRQHandler  ; UART1 status/error interrupt
        DCD     UART2_IRQHandler  ; UART2 status/error interrupt
        DCD     ADC0_IRQHandler  ; ADC0 interrupt
        DCD     CMP0_IRQHandler  ; CMP0 interrupt
        DCD     TPM0_IRQHandler  ; TPM0 fault, overflow and channels interrupt
        DCD     TPM1_IRQHandler  ; TPM1 fault, overflow and channels interrupt
        DCD     TPM2_IRQHandler  ; TPM2 fault, overflow and channels interrupt
        DCD     RTC_IRQHandler  ; RTC interrupt
        DCD     RTC_Seconds_IRQHandler  ; RTC seconds interrupt
        DCD     PIT_IRQHandler  ; PIT timer interrupt
        DCD     I2S0_IRQHandler  ; I2S0 transmit interrupt
        DCD     USB0_IRQHandler  ; USB0 interrupt
        DCD     DAC0_IRQHandler  ; DAC0 interrupt
        DCD     TSI0_IRQHandler  ; TSI0 interrupt
        DCD     MCG_IRQHandler  ; MCG interrupt
        DCD     LPTimer_IRQHandler  ; LPTimer interrupt
        DCD     LCD_IRQHandler  ; Segment LCD Interrupt
        DCD     PORTA_IRQHandler  ; Port A interrupt
        DCD     PORTD_IRQHandler  ; Port D interrupt      
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;Flash Configuration
;;16-byte flash configuration field that stores default protection settings (loaded on reset)
;;and security information that allows the MCU to restrict acces to the FTFL module.

BackDoorK0      EQU     0xFF
BackDoorK1      EQU     0xFF
BackDoorK2      EQU     0xFF
BackDoorK3      EQU     0xFF
BackDoorK4      EQU     0xFF
BackDoorK5      EQU     0xFF
BackDoorK6      EQU     0xFF
BackDoorK7      EQU     0xFF

nFPROT0         EQU     0x00
FPROT0          EQU     nFPROT0^0xFF

nFPROT1         EQU     0x00
FPROT1          EQU     nFPROT1^0xFF

nFPROT2         EQU     0x00
FPROT2          EQU     nFPROT2^0xFF

nFPROT3         EQU     0x00
FPROT3          EQU     nFPROT3^0xFF

FOPT            EQU     0xFF        

FSEC            EQU     0xFE        
        SECTION FlashConfig:CONST:REORDER:ROOT(2)
Config:
        DATA
        DCB     BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3
        DCB     BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7
        DCB     FPROT0,     FPROT1,     FPROT2,     FPROT3
        DCB     FSEC,       FOPT,       0xFF,     0xFF 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
        THUMB
        PUBWEAK Reset_Handler
        SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler

        LDR     R0, =SystemInit
        BLX     R0
        LDR     R0, =__iar_program_start
        BX      R0
        
      PUBWEAK NMI_Handler
      PUBWEAK HardFault_Handler
      PUBWEAK SVC_Handler
      PUBWEAK PendSV_Handler
      PUBWEAK SysTick_Handler
      PUBWEAK DMA0_IRQHandler
      PUBWEAK DMA1_IRQHandler
      PUBWEAK DMA2_IRQHandler
      PUBWEAK DMA3_IRQHandler
      PUBWEAK Reserved20_IRQHandler
      PUBWEAK FTFA_IRQHandler
      PUBWEAK LVD_LVW_IRQHandler
      PUBWEAK LLW_IRQHandler
      PUBWEAK I2C0_IRQHandler
      PUBWEAK I2C1_IRQHandler
      PUBWEAK SPI0_IRQHandler
      PUBWEAK SPI1_IRQHandler
      PUBWEAK UART0_IRQHandler
      PUBWEAK UART1_IRQHandler
      PUBWEAK UART2_IRQHandler
      PUBWEAK ADC0_IRQHandler
      PUBWEAK CMP0_IRQHandler
      PUBWEAK TPM0_IRQHandler
      PUBWEAK TPM1_IRQHandler
      PUBWEAK TPM2_IRQHandler
      PUBWEAK RTC_IRQHandler
      PUBWEAK RTC_Seconds_IRQHandler
      PUBWEAK PIT_IRQHandler
      PUBWEAK I2S0_IRQHandler
      PUBWEAK USB0_IRQHandler
      PUBWEAK DAC0_IRQHandler
      PUBWEAK TSI0_IRQHandler
      PUBWEAK MCG_IRQHandler
      PUBWEAK LPTimer_IRQHandler
      PUBWEAK LCD_IRQHandler
      PUBWEAK PORTA_IRQHandler
      PUBWEAK PORTD_IRQHandler      

      SECTION .text:CODE:REORDER:NOROOT(1)
      THUMB
NMI_Handler
HardFault_Handler
SVC_Handler
PendSV_Handler
SysTick_Handler
DMA0_IRQHandler
DMA1_IRQHandler
DMA2_IRQHandler
DMA3_IRQHandler
Reserved20_IRQHandler
FTFA_IRQHandler
LVD_LVW_IRQHandler
LLW_IRQHandler
I2C0_IRQHandler
I2C1_IRQHandler
SPI0_IRQHandler
SPI1_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
ADC0_IRQHandler
CMP0_IRQHandler
TPM0_IRQHandler
TPM1_IRQHandler
TPM2_IRQHandler
RTC_IRQHandler
RTC_Seconds_IRQHandler
PIT_IRQHandler
I2S0_IRQHandler
USB0_IRQHandler
DAC0_IRQHandler
TSI0_IRQHandler
MCG_IRQHandler
LPTimer_IRQHandler
LCD_IRQHandler
PORTA_IRQHandler
PORTD_IRQHandler
Default_Handler

        B Default_Handler
        END