File content as of revision 577:15494b56c2f3:

/**************************************************
 *
 * Copyright 2012 IAR Systems. All rights reserved.
 *
 * $Revision: 16 $
 *
 **************************************************/

;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;

        MODULE  ?cstartup

        ;; Forward declaration of sections.
        SECTION CSTACK:DATA:NOROOT(3)

        SECTION .intvec:CODE:ROOT(2)

        EXTERN  __iar_program_start
        EXTERN  SystemInit
        PUBLIC  __vector_table

        DATA
__vector_table
        DCD     sfe(CSTACK)                   ; Top of Stack
        DCD     Reset_Handler           ; Reset Handler
        DCD     NMI_Handler                   ; NMI Handler
        DCD     HardFault_Handler             ; Hard Fault Handler
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     SVC_Handler                   ; SVCall Handler
        DCD     0                             ; Reserved
        DCD     0                             ; Reserved
        DCD     PendSV_Handler                ; PendSV Handler
        DCD     SysTick_Handler               ; SysTick Handler
        ; External Interrupts
        DCD     DMA0_IRQHandler               ; 0:  DMA Channel 0 transfer complete intertrupt
        DCD     DMA1_IRQHandler               ; 1:  DMA Channel 1 transfer complete intertrupt
        DCD     DMA2_IRQHandler               ; 2:  DMA Channel 2 transfer complete intertrupt
        DCD     DMA3_IRQHandler               ; 3:  DMA Channel 3 transfer complete intertrupt
        DCD     0                                      ; 4:  Reserved
        DCD     FTFA_IRQHandler               ; 5:  FTFA 
        DCD     LVD_LVW_IRQHandler                ; 6:  Low-voltage detect, low-voltage warning
        DCD     LLW_IRQHandler               ; 7:  Low Leakage Wakeup
        DCD     I2C0_IRQHandler               ; 8:  IIC 0 interrupt
        DCD     0                                   ; 9:  Reserved
        DCD     SPI0_IRQHandler               ;10:  SPI0 intertrupt
        DCD     0                                      ;11:  Reserved
        DCD     UART0_IRQHandler              ;12:  UART 0 status and error intertrupt
        DCD     0                                       ;13:  Reserved
        DCD     0                                       ;14:  Reserved
        DCD     ADC0_IRQHandler               ;15:  ADC 0 interrupt
        DCD     CMP0_IRQHandler               ;16:  CMP 0 interrupt
        DCD     TPM0_IRQHandler               ;17:  TPM 0 interrupt
        DCD     TPM1_IRQHandler               ;18:  TPM 1 interrupt
        DCD     0                                      ;19:  Reserved
        DCD     RTC_IRQHandler                ;20:  RTC interrupt
        DCD     RTC_Seconds_IRQHandler  ;21:  RTC Seconds interrupt
        DCD     PIT_IRQHandler                ;22:  PIT Single interrupt vector for all channels
        DCD     0                                      ;23:  Reserved
        DCD     0                                     ;24:  Reserved
        DCD     DAC0_IRQHandler               ;25:  UART 0 status intertrupt
        DCD     TSI0_IRQHandler               ;26:  TSI 0 interrupt
        DCD     MCG_IRQHandler                ;27:  MCG intertrupt
        DCD     LPTimer_IRQHandler             ;28:  LPTimer interrupt
        DCD     0                                      ;29:  Reserved
        DCD     PORTA_IRQHandler              ;30:  PORT A interrupt
        DCD     PORTB_IRQHandler              ;31:  PORT B interrupt
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;Flash Configuration
;;16-byte flash configuration field that stores default protection settings (loaded on reset)
;;and security information that allows the MCU to restrict acces to the FTFL module.

BackDoorK0      EQU     0xFF
BackDoorK1      EQU     0xFF
BackDoorK2      EQU     0xFF
BackDoorK3      EQU     0xFF
BackDoorK4      EQU     0xFF
BackDoorK5      EQU     0xFF
BackDoorK6      EQU     0xFF
BackDoorK7      EQU     0xFF

nFPROT0         EQU     0x00
FPROT0          EQU     nFPROT0^0xFF

nFPROT1         EQU     0x00
FPROT1          EQU     nFPROT1^0xFF

nFPROT2         EQU     0x00
FPROT2          EQU     nFPROT2^0xFF

nFPROT3         EQU     0x00
FPROT3          EQU     nFPROT3^0xFF

FOPT            EQU     0xFF        

FSEC            EQU     0xFE        
        SECTION FlashConfig:CONST:REORDER:ROOT(2)
Config:
        DATA
        DCB     BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3
        DCB     BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7
        DCB     FPROT0,     FPROT1,     FPROT2,     FPROT3
        DCB     FSEC,       FOPT,       0xFF,     0xFF       
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
        THUMB
        PUBWEAK Reset_Handler
        SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler

        LDR     R0, =SystemInit
        BLX     R0
        LDR     R0, =__iar_program_start
        BX      R0
        
      PUBWEAK NMI_Handler
      PUBWEAK HardFault_Handler
      PUBWEAK SVC_Handler
      PUBWEAK PendSV_Handler
      PUBWEAK SysTick_Handler
      PUBWEAK DMA0_IRQHandler
      PUBWEAK DMA1_IRQHandler
      PUBWEAK DMA2_IRQHandler
      PUBWEAK DMA3_IRQHandler
      PUBWEAK FTFA_IRQHandler     
      PUBWEAK LVD_LVW_IRQHandler      
      PUBWEAK LLW_IRQHandler     
      PUBWEAK I2C0_IRQHandler     
      PUBWEAK SPI0_IRQHandler       
      PUBWEAK UART0_IRQHandler     
      PUBWEAK ADC0_IRQHandler     
      PUBWEAK CMP0_IRQHandler     
      PUBWEAK TPM0_IRQHandler     
      PUBWEAK TPM1_IRQHandler         
      PUBWEAK RTC_IRQHandler
      PUBWEAK RTC_Seconds_IRQHandler      
      PUBWEAK PIT_IRQHandler      
      PUBWEAK DAC0_IRQHandler   
      PUBWEAK TSI0_IRQHandler   
      PUBWEAK MCG_IRQHandler    
      PUBWEAK LPTimer_IRQHandler 
      PUBWEAK PORTA_IRQHandler
      PUBWEAK PORTB_IRQHandler

      SECTION .text:CODE:REORDER:NOROOT(1)
      THUMB
NMI_Handler
HardFault_Handler
SVC_Handler
PendSV_Handler
SysTick_Handler
DMA0_IRQHandler
DMA1_IRQHandler
DMA2_IRQHandler
DMA3_IRQHandler
FTFA_IRQHandler     
LVD_LVW_IRQHandler      
LLW_IRQHandler     
I2C0_IRQHandler          
SPI0_IRQHandler          
UART0_IRQHandler          
ADC0_IRQHandler     
CMP0_IRQHandler     
TPM0_IRQHandler     
TPM1_IRQHandler     
RTC_IRQHandler
RTC_Seconds_IRQHandler      
PIT_IRQHandler      
DAC0_IRQHandler   
TSI0_IRQHandler   
MCG_IRQHandler    
LPTimer_IRQHandler 
PORTA_IRQHandler
PORTB_IRQHandler
Default_Handler

        B Default_Handler
        END