mbed-src - mbed library sources

Users » mbed_official » Code » mbed-src

mbed library sources

Dependents: Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more

Superseded

This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.

Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.

If you are looking for a stable and tested release, please import one of the official mbed library releases:

Import library mbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Diff: targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h

Revision:: 586:dfaf40375987
Parent:: 511:532f83b66a7f

--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h	Wed Jul 08 14:45:08 2015 +0100
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h	Wed Jul 08 15:00:09 2015 +0100
@@ -126,7 +126,7 @@
     P_A17   = PD_12,  // GPIO-3
     P_A18   = PA_3,   // UART-DSR
     // B
-    // C
+	  // C
     P_C5    = PG_4,   // SPI-IRQ
     P_C6    = PE_13,  // SPI-MISO
     P_C8    = PE_12,  // Res
@@ -139,7 +139,7 @@
     P_C16   = PF_7,   // GPIO-7
     P_C17   = PF_1,   // I2C-SCL
     P_C18   = PF_0,   // I2C-SDA
-    // D
+	  // D
     P_D1    = PB_12,  // RMII-TXD0
     P_D2    = PB_13,  // RMII-TXD1
     P_D3    = PB_11,  // RMII-TXEN
@@ -152,27 +152,28 @@
     P_TP7   = PA_13,  // TMS  SWDIO
     P_TP8   = PA_15,  // TDI
     P_TP9   = PA_14,  // TCK  SWCLK
-    P_TP10  = PB_3,   // TDO  
+    P_TP10  = PB_3,   // TDO 
+    //P_TP11,         // BOOT0 		
 
     // Board Pins
     // A0-A5
-    A0      = PF_7,
-    A1      = PF_6,
-    A2      = PA_3,
-    A3      = PC_2,
+    A0      = PF_6,  // AI4
+    A1      = PA_3,  // AI3
+    A2      = PC_2,  // AI12
+    A3      = PF_7,  // LPOCLK, not AI
     A4      = PG_4,  // not AI
     A5      = PB_3,  // not AI
     // D0-D15
-    D0      = PD_9,   // RX
-    D1      = PD_8,   // TX
-    D2      = PA_10,  // RX
-    D3      = PA_11,
-    D4      = PA_12,
+    D0      = PD_9,   // UART3-RX
+    D1      = PD_8,   // UART3-TX
+    D2      = PA_10,  // UART1-RX
+    D3      = PA_11,  // CAN1-RX
+    D4      = PA_12,  // CAN1-TX
     D5      = PA_15,
-    D6      = PD_11,
-    D7      = PD_12,
-    D8      = PA_9,   // TX
-    D9      = PE_9,   // shared with SW1
+    D6      = PD_11,  // UART3-CTS
+    D7      = PD_12,  // UART3-RTS
+    D8      = PA_9,   // UART1-TX
+    D9      = PE_9,   // SDCard-CS
     D10     = PE_11,  // SSEL
     D11     = PE_14,  // MOSI
     D12     = PE_13,  // MISO
@@ -180,16 +181,17 @@
     D14     = PF_0,   // SDA
     D15     = PF_1,   // SCL
     // Internal
-    LED1    = PE_0,   // Red
-    LED2    = PB_6,   // Green / shared with SW1
-    LED_RED = PE_0,   // Red
-    LED_GRE = PB_6,   // Green / shared with SW1
+    LED_RED = PE_0,   // Red / Mode
+    LED_GRE = PB_6,   // Green / Switch-1
     LED_BLU = PB_8,   // Blue
-    SW0     = PF_2,	  // Switch 0
-    SW1     = PB_6,   // Switch 1 / shared with LED_GRE
-    SDCS    = PE_9,   // SD Card CS / shared with D9
-    USBRXD  = PD_9,   // RX
-    USBTXD  = PD_8,   // TX
+    SW0     = PF_2,   // Switch-0
+    SW1     = PB_6,   // Green / Switch-1
+    // ST-Link
+    USBRXD  = PD_9,
+    USBTXD  = PD_8,
+    SWDIO   = PA_15, 
+    SWCLK   = PA_14, 
+    NTRST   = PB_4,  
 
     // Not connected
     NC = (int)0xFFFFFFFF