Diff: targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/rtc/rtc_calendar.h

Revision:

592:a274ee790e56

Parent:

591:474d026f7d79

Child:

593:78ee8643776a

--- a/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/rtc/rtc_calendar.h	Wed Jul 15 08:15:08 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1254 +0,0 @@
-/**
- * \file
- *
- * \brief SAM RTC Driver (Calendar Mode)
- *
- * Copyright (C) 2012-2014 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- *    Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-/**
-* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
-*/
-#ifndef RTC_CALENDAR_H_INCLUDED
-#define RTC_CALENDAR_H_INCLUDED
-
-/**
- * \defgroup asfdoc_sam0_rtc_calendar_group SAM RTC Calendar Driver (RTC CAL)
- *
- * This driver for Atmel庐 | SMART SAM devices provides an interface for the configuration
- * and management of the device's Real Time Clock functionality in Calendar
- * operating mode, for the configuration and retrieval of the current time and
- * date as maintained by the RTC module. The following driver API modes are
- * covered by this manual:
- *
- *  - Polled APIs
- * \if RTC_CALENDAR_CALLBACK_MODE
- *  - Callback APIs
- * \endif
- *
- * The following peripherals are used by this module:
- *  - RTC (Real Time Clock)
- *
- * The following devices can use this module:
- *  - Atmel | SMART SAM D20/D21
- *  - Atmel | SMART SAM R21
- *  - Atmel | SMART SAM D10/D11
- *  - Atmel | SMART SAM L21
- *
- * The outline of this documentation is as follows:
- *  - \ref asfdoc_sam0_rtc_calendar_prerequisites
- *  - \ref asfdoc_sam0_rtc_calendar_module_overview
- *  - \ref asfdoc_sam0_rtc_calendar_special_considerations
- *  - \ref asfdoc_sam0_rtc_calendar_extra_info
- *  - \ref asfdoc_sam0_rtc_calendar_examples
- *  - \ref asfdoc_sam0_rtc_calendar_api_overview
- *
- *
- * \section asfdoc_sam0_rtc_calendar_prerequisites Prerequisites
- *
- * There are no prerequisites for this module.
- *
- *
- * \section asfdoc_sam0_rtc_calendar_module_overview Module Overview
- *
- * The RTC module in the SAM devices is a 32-bit counter, with a 10-bit
- * programmable prescaler. Typically, the RTC clock is run continuously,
- * including in the device's low-power sleep modes, to track the current time
- * and date information. The RTC can be used as a source to wake up the system
- * at a scheduled time or periodically using the alarm functions.
- *
- * In this driver, the RTC is operated in Calendar mode. This allows for an
- * easy integration of a real time clock and calendar into a user application
- * to track the passing of time and/or perform scheduled tasks.
- *
- * Whilst operating in Calendar mode, the RTC features:
- *  - Time tracking in seconds, minutes, and hours
- *  - 12 or 24 hour mode
- *  - Date tracking in day, month, and year
- *  - Automatic leap year correction
- *
- * \subsection asfdoc_sam0_rtc_calendar_features Driver Feature Macro Definition
- * <table>
- *  <tr>
- *    <th>Driver Feature Macro</th>
- *    <th>Supported devices</th>
- *  </tr>
- *  <tr>
- *    <td>FEATURE_RTC_PERIODIC_INT</td>
- *    <td>SAML21</td>
- *  </tr>
- *  <tr>
- *    <td>FEATURE_RTC_PRESCALER_OFF</td>
- *    <td>SAML21</td>
- *  </tr>
- *  <tr>
- *    <td>FEATURE_RTC_CLOCK_SELECTION</td>
- *    <td>SAML21</td>
- *  </tr>
- *  <tr>
- *    <td>FEATURE_RTC_GENERAL_PURPOSE_REG</td>
- *    <td>SAML21</td>
- *  </tr>
- *  <tr>
- *    <td>FEATURE_RTC_CONTINUOUSLY_UPDATED</td>
- *    <td>SAMD20, SAMD21, SAMR21, SAMD10, SAMD11</td>
- *  </tr>
- * </table>
- * \note The specific features are only available in the driver when the
- * selected device supports those features.
- *
- * \subsection asfdoc_sam0_rtc_calendar_module_overview_alarms Alarms and Overflow
- * The RTC has four independent hardware alarms that can be configured by the user
- * application. These alarms will be will triggered on match with the current
- * clock value, and can be set up to trigger an interrupt, event, or both. The
- * RTC can also be configured to clear the clock value on alarm match, resetting
- * the clock to the original start time.
- *
- * If the RTC is operated in clock-only mode (i.e. with calendar disabled), the
- * RTC counter value will instead be cleared on overflow once the maximum count
- * value has been reached:
- *
- * \f[ COUNT_{MAX} = 2^{32}-1 \f]
- *
- * When the RTC is operated with the calendar enabled and run using a nominal
- * 1Hz input clock frequency, a register overflow will occur after 64 years.
- *
- * \subsection asfdoc_sam0_rtc_calendar_module_overview_periodic Periodic Events
- * The RTC can generate events at periodic intervals, allowing for direct
- * peripheral actions without CPU intervention. The periodic events can be
- * generated on the upper eight bits of the RTC prescaler, and will be generated on
- * the rising edge transition of the specified bit. The resulting periodic
- * frequency can be calculated by the following formula:
- *
- * \f[ f_{PERIODIC}=\frac{f_{ASY}}{2^{n+3}} \f]
- *
- * Where \f$f_{ASY}\f$ refers to the \e asynchronous clock set up in the RTC
- * module configuration. For the RTC to operate correctly in calendar mode, this
- * frequency must be 1KHz, while the RTC's internal prescaler should be set to
- * divide by 1024. The \b n parameter is the event source generator index of the
- * RTC module. If the asynchronous clock is operated at the recommended 1KHz,
- * the formula results in the values shown in
- * \ref asfdoc_sam0_rtc_calendar_module_rtc_hz "the table below".
- *
- * \anchor asfdoc_sam0_rtc_calendar_module_rtc_hz
- * <table>
- *   <caption>RTC Event Frequencies for Each Prescaler Bit Using a 1KHz Clock</caption>
- *   <tr>
- *      <th>n</th> <th>Periodic event</th>
- *   </tr>
- *   <tr>
- *      <td>7</td> <td>1Hz</td>
- *   </tr>
- *   <tr>
- *      <td>6</td> <td>2Hz</td>
- *   </tr>
- *   <tr>
- *      <td>5</td> <td>4Hz</td>
- *   </tr>
- *   <tr>
- *      <td>4</td> <td>8Hz</td>
- *   </tr>
- *   <tr>
- *      <td>3</td> <td>16Hz</td>
- *   </tr>
- *   <tr>
- *      <td>2</td> <td>32Hz</td>
- *   </tr>
- *   <tr>
- *      <td>1</td> <td>64Hz</td>
- *   </tr>
- *   <tr>
- *      <td>0</td> <td>128Hz</td>
- *   </tr>
- * </table>
- *
- * \note The connection of events between modules requires the use of the
- *       \ref asfdoc_sam0_events_group "SAM Event System Driver (EVENTS)"
- *       to route output event of one module to the the input event of another.
- *       For more information on event routing, refer to the event driver
- *       documentation.
- *
- * \subsection asfdoc_sam0_rtc_calendar_module_overview_correction Digital Frequency Correction
- * The RTC module contains Digital Frequency Correction logic to compensate for
- * inaccurate source clock frequencies which would otherwise result in skewed
- * time measurements. The correction scheme requires that at least two bits
- * in the RTC module prescaler are reserved by the correction logic. As a
- * result of this implementation, frequency correction is only available when
- * the RTC is running from a 1Hz reference clock.
- *
- * The correction procedure is implemented by subtracting or adding a single
- * cycle from the RTC prescaler every 1024 RTC GCLK cycles. The adjustment is
- * applied the specified number of time (maximum 127) over 976 of these periods. The
- * corresponding correction in PPM will be given by:
- *
- * \f[ Correction(PPM) = \frac{VALUE}{999424}10^6 \f]
- *
- * The RTC clock will tick faster if provided with a positive correction value,
- * and slower when given a negative correction value.
- *
- *
- * \section asfdoc_sam0_rtc_calendar_special_considerations Special Considerations
- *
- * \subsection asfdoc_sam0_rtc_calendar_special_considerations_year Year Limit
- * The RTC module has a year range of 63 years from the starting year configured
- * when the module is initialized. Dates outside the start to end year range
- * described below will need software adjustment:
- *
- * \f[ [YEAR_{START}, YEAR_{START}+64) \f]
- *
- * \subsection asfdoc_sam0_rtc_calendar_special_considerations_clock Clock Setup
- * \subsubsection asfdoc_sam0_rtc_calendar_clock_samd_r SAM D20/D21/R21/D10/D11 Clock Setup
- * The RTC is typically clocked by a specialized GCLK generator that has a
- * smaller prescaler than the others. By default the RTC clock is on, selected
- * to use the internal 32KHz RC-oscillator with a prescaler of 32, giving a
- * resulting clock frequency of 1024Hz to the RTC. When the internal RTC
- * prescaler is set to 1024, this yields an end-frequency of 1Hz for correct
- * time keeping operations.
- *
- * The implementer also has the option to set other end-frequencies.
- * \ref asfdoc_sam0_rtc_calendar_rtc_out_freq "The table below" lists the
- * available RTC frequencies for each possible GCLK and RTC input prescaler
- * options.
- *
- * \anchor asfdoc_sam0_rtc_calendar_rtc_out_freq
- * <table>
- *   <caption>RTC Output Frequencies from Allowable Input Clocks</caption>
- *   <tr>
- *     <th>End-frequency</th>
- *     <th>GCLK prescaler</th>
- *     <th>RTC prescaler</th>
- *   </tr>
- *   <tr>
- *     <td>32KHz</td>
- *     <td>1</td>
- *     <td>1</td>
- *   </tr>
- *   <tr>
- *     <td>1KHz</td>
- *     <td>32</td>
- *     <td>1</td>
- *   </tr>
- *   <tr>
- *     <td>1Hz</td>
- *     <td>32</td>
- *     <td>1024</td>
- *   </tr>
- * </table>
- *
- * The overall RTC module clocking scheme is shown in
- * \ref asfdoc_sam0_rtc_calendar_rtc_clock_fig "the figure below".
- *
- * \anchor asfdoc_sam0_rtc_calendar_rtc_clock_fig
- * \dot
- * digraph clocking_scheme {
- *     rankdir=LR;
- *     GCLK [shape="record", label="<f0> GCLK | <f1> RTC_GCLK",
- *         bgcolor="lightgray", style="filled"];
- *     RTCPRE [shape="record" label="<f0> RTC | <f1> RTC PRESCALER"];
- *     RTC [shape="record", label="<f0> RTC | <f1> RTC CLOCK"];
- *
- *     GCLK:f1 -> RTCPRE:f1;
- *     RTCPRE:f1 -> RTC:f1;
- * }
- * \enddot
- *
- * \note For the calendar to operate correctly, an asynchronous clock of 1Hz
- *       should be used.
- *
- * \subsubsection asfdoc_sam0_rtc_calendar_clock_saml SAM L21 Clock Setup
- * The RTC clock can be selected from OSC32K,XOSC32K or OSCULP32K , and a 32KHz
- * or 1KHz oscillator clock frequency is required. This clock must be
- * configured and enabled in the 32KHz oscillator controller before using the RTC.
- *
- * The table below lists the available RTC clock \ref asfdoc_sam0_rtc_calendar_rtc_clk
- *
- * \anchor asfdoc_sam0_rtc_calendar_rtc_clk
- * <table>
- *   <caption>RTC clocks source</caption>
- *   <tr>
- *     <th>RTC clock frequency</th>
- *     <th>Clock source</th>
- *     <th>Description</th>
- *   </tr>
- *   <tr>
- *     <td>1.024KHz</td>
- *     <td>ULP1K</td>
- *     <td>1.024KHz from 32KHz internal ULP oscillator</td>
- *   </tr>
- *   <tr>
- *     <td>32.768KHz</td>
- *     <td>ULP32K</td>
- *     <td>32.768KHz from 32KHz internal ULP oscillator</td>
- *   </tr>
- *   <tr>
- *     <td>1.024KHz</td>
- *     <td>OSC1K</td>
- *     <td>1.024KHz from 32KHz internal oscillator</td>
- *   </tr>
- *   <tr>
- *     <td>32.768KHz</td>
- *     <td>OSC32K</td>
- *     <td>32.768KHz from 32KHz internal oscillator</td>
- *   </tr>
- *   <tr>
- *     <td>1.024KHz</td>
- *     <td>XOSC1K</td>
- *     <td>1.024KHz from 32KHz internal oscillator</td>
- *   </tr>
- *   <tr>
- *     <td>32.768KHz</td>
- *     <td>XOSC32K</td>
- *     <td>32.768KHz from 32KHz external crystal oscillator</td>
- *   </tr>
- * </table>
- *
- * \note For the calendar to operate correctly, an asynchronous clock of 1Hz
- *       should be used.
- *
- * \section asfdoc_sam0_rtc_calendar_extra_info Extra Information
- *
- * For extra information, see \ref asfdoc_sam0_rtc_calendar_extra. This includes:
- *  - \ref asfdoc_sam0_rtc_calendar_extra_acronyms
- *  - \ref asfdoc_sam0_rtc_calendar_extra_dependencies
- *  - \ref asfdoc_sam0_rtc_calendar_extra_errata
- *  - \ref asfdoc_sam0_rtc_calendar_extra_history
- *
- *
- * \section asfdoc_sam0_rtc_calendar_examples Examples
- *
- * For a list of examples related to this driver, see
- * \ref asfdoc_sam0_rtc_calendar_exqsg.
- *
- *
- * \section asfdoc_sam0_rtc_calendar_api_overview API Overview
- * @{
- */
-
-#include <conf_clocks.h>
-
-#if RTC_CALENDAR_ASYNC == true
-#  include <system_interrupt.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * Define port features set according to different device family
- * @{
-*/
-#if (SAML21) || defined(__DOXYGEN__)
-/** RTC periodic interval interrupt. */
-#  define FEATURE_RTC_PERIODIC_INT
-/** RTC prescaler is off. */
-#  define FEATURE_RTC_PRESCALER_OFF
-/** RTC clock selection. */
-#  define FEATURE_RTC_CLOCK_SELECTION
-/** General purpose registers. */
-#  define FEATURE_RTC_GENERAL_PURPOSE_REG
-#else
-/** RTC continuously updated. */
-#  define FEATURE_RTC_CONTINUOUSLY_UPDATED
-#endif
-/*@}*/
-
-#ifdef FEATURE_RTC_CLOCK_SELECTION
-/**
- * \brief Available clock source for RTC.
- * RTC clock source.
- */
-enum rtc_clock_sel {
-    /** 1.024KHz from 32KHz internal ULP oscillator. */
-    RTC_CLOCK_SELECTION_ULP1K = OSC32KCTRL_RTCCTRL_RTCSEL_ULP1K_Val,
-    /** 32.768KHz from 32KHz internal ULP oscillator. */
-    RTC_CLOCK_SELECTION_ULP32K = OSC32KCTRL_RTCCTRL_RTCSEL_ULP32K_Val,
-    /** 1.024KHz from 32KHz internal oscillator. */
-    RTC_CLOCK_SELECTION_OSC1K = OSC32KCTRL_RTCCTRL_RTCSEL_OSC1K_Val,
-    /** 32.768KHz from 32KHz internal oscillator. */
-    RTC_CLOCK_SELECTION_OSC32K = OSC32KCTRL_RTCCTRL_RTCSEL_OSC32K_Val,
-    /** 1.024KHz from 32KHz internal oscillator. */
-    RTC_CLOCK_SELECTION_XOSC1K = OSC32KCTRL_RTCCTRL_RTCSEL_XOSC1K_Val,
-    /** 32.768KHz from 32.768KHz external crystal oscillator. */
-    RTC_CLOCK_SELECTION_XOSC32K = OSC32KCTRL_RTCCTRL_RTCSEL_XOSC32K_Val,
-};
-#endif
-
-#if !defined (RTC_NUM_OF_ALARMS) && defined(RTC_ALARM_NUM)
-#define RTC_NUM_OF_ALARMS RTC_ALARM_NUM
-#endif
-
-/**
- * \brief Available alarm channels.
- *
- * Available alarm channels.
- *
- * \note Not all alarm channels are available on all devices.
- */
-enum rtc_calendar_alarm {
-    /** Alarm channel 0. */
-    RTC_CALENDAR_ALARM_0 = 0,
-#if (RTC_NUM_OF_ALARMS > 1) || defined(__DOXYGEN__)
-    /** Alarm channel 1. */
-    RTC_CALENDAR_ALARM_1 = 1,
-#endif
-#if (RTC_NUM_OF_ALARMS > 2) || defined(__DOXYGEN__)
-    /** Alarm channel 2. */
-    RTC_CALENDAR_ALARM_2 = 2,
-#endif
-#if (RTC_NUM_OF_ALARMS > 3) || defined(__DOXYGEN__)
-    /** Alarm channel 3. */
-    RTC_CALENDAR_ALARM_3 = 3,
-#endif
-};
-
-#if RTC_CALENDAR_ASYNC == true
-#ifdef FEATURE_RTC_PERIODIC_INT
-/**
- * \brief Callback types.
- *
- * The available callback types for the RTC calendar module.
- */
-enum rtc_calendar_callback {
-    /** Callback for Periodic Interval 0 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_0 = 0,
-    /** Callback for Periodic Interval 1 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_1,
-    /** Callback for Periodic Interval 2 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_2,
-    /** Callback for Periodic Interval 3 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_3,
-    /** Callback for Periodic Interval 4 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_4,
-    /** Callback for Periodic Interval 5 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_5,
-    /** Callback for Periodic Interval 6 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_6,
-    /** Callback for Periodic Interval 7 Interrupt. */
-    RTC_CALENDAR_CALLBACK_PERIODIC_INTERVAL_7,
-    /** Callback for alarm 0. */
-    RTC_CALENDAR_CALLBACK_ALARM_0,
-#  if (RTC_NUM_OF_ALARMS > 1) || defined(__DOXYGEN__)
-    /** Callback for alarm 1. */
-    RTC_CALENDAR_CALLBACK_ALARM_1,
-#  endif
-#  if (RTC_NUM_OF_ALARMS > 2) || defined(__DOXYGEN__)
-    /** Callback for alarm 2. */
-    RTC_CALENDAR_CALLBACK_ALARM_2,
-#  endif
-#  if (RTC_NUM_OF_ALARMS > 3)	|| defined(__DOXYGEN__)
-    /** Callback for alarm 3. */
-    RTC_CALENDAR_CALLBACK_ALARM_3,
-#  endif
-    /** Callback for  overflow. */
-    RTC_CALENDAR_CALLBACK_OVERFLOW,
-#  if !defined(__DOXYGEN__)
-    /** Total number of callbacks. */
-    _RTC_CALENDAR_CALLBACK_N
-#  endif
-};
-#else
-/**
- * \brief Callback types.
- *
- * The available callback types for the RTC calendar module.
- */
-enum rtc_calendar_callback {
-    /** Callback for alarm 0. */
-    RTC_CALENDAR_CALLBACK_ALARM_0 = 0,
-#  if (RTC_NUM_OF_ALARMS > 1) || defined(__DOXYGEN__)
-    /** Callback for alarm 1. */
-    RTC_CALENDAR_CALLBACK_ALARM_1,
-#  endif
-#  if (RTC_NUM_OF_ALARMS > 2) || defined(__DOXYGEN__)
-    /** Callback for alarm 2. */
-    RTC_CALENDAR_CALLBACK_ALARM_2,
-#  endif
-#  if (RTC_NUM_OF_ALARMS > 3)	|| defined(__DOXYGEN__)
-    /** Callback for alarm 3. */
-    RTC_CALENDAR_CALLBACK_ALARM_3,
-#  endif
-    /** Callback for  overflow. */
-    RTC_CALENDAR_CALLBACK_OVERFLOW,
-#  if !defined(__DOXYGEN__)
-    /** Total number of callbacks. */
-    _RTC_CALENDAR_CALLBACK_N
-#  endif
-};
-#endif
-
-#  if !defined(__DOXYGEN__)
-typedef void (*rtc_calendar_callback_t)(void);
-#  endif
-#endif
-
-#ifdef FEATURE_RTC_PRESCALER_OFF
-/**
- * \brief RTC input clock prescaler settings.
- *
- * The available input clock prescaler values for the RTC calendar module.
- */
-enum rtc_calendar_prescaler {
-    /** RTC prescaler is off, and the input clock frequency is
-    prescaled by a factor of 1. */
-    RTC_CALENDAR_PRESCALER_OFF      = RTC_MODE2_CTRLA_PRESCALER_OFF,
-    /** RTC input clock frequency is prescaled by a factor of 1. */
-    RTC_CALENDAR_PRESCALER_DIV_1    = RTC_MODE2_CTRLA_PRESCALER_DIV1,
-    /** RTC input clock frequency is prescaled by a factor of 2. */
-    RTC_CALENDAR_PRESCALER_DIV_2    = RTC_MODE2_CTRLA_PRESCALER_DIV2,
-    /** RTC input clock frequency is prescaled by a factor of 4. */
-    RTC_CALENDAR_PRESCALER_DIV_4    = RTC_MODE2_CTRLA_PRESCALER_DIV4,
-    /** RTC input clock frequency is prescaled by a factor of 8. */
-    RTC_CALENDAR_PRESCALER_DIV_8    = RTC_MODE2_CTRLA_PRESCALER_DIV8,
-    /** RTC input clock frequency is prescaled by a factor of 16. */
-    RTC_CALENDAR_PRESCALER_DIV_16   = RTC_MODE2_CTRLA_PRESCALER_DIV16,
-    /** RTC input clock frequency is prescaled by a factor of 32. */
-    RTC_CALENDAR_PRESCALER_DIV_32   = RTC_MODE2_CTRLA_PRESCALER_DIV32,
-    /** RTC input clock frequency is prescaled by a factor of 64. */
-    RTC_CALENDAR_PRESCALER_DIV_64   = RTC_MODE2_CTRLA_PRESCALER_DIV64,
-    /** RTC input clock frequency is prescaled by a factor of 128. */
-    RTC_CALENDAR_PRESCALER_DIV_128  = RTC_MODE2_CTRLA_PRESCALER_DIV128,
-    /** RTC input clock frequency is prescaled by a factor of 256. */
-    RTC_CALENDAR_PRESCALER_DIV_256  = RTC_MODE2_CTRLA_PRESCALER_DIV256,
-    /** RTC input clock frequency is prescaled by a factor of 512. */
-    RTC_CALENDAR_PRESCALER_DIV_512  = RTC_MODE2_CTRLA_PRESCALER_DIV512,
-    /** RTC input clock frequency is prescaled by a factor of 1024. */
-    RTC_CALENDAR_PRESCALER_DIV_1024 = RTC_MODE2_CTRLA_PRESCALER_DIV1024,
-};
-
-#else
-/**
- * \brief RTC input clock prescaler settings.
- *
- * The available input clock prescaler values for the RTC calendar module.
- */
-enum rtc_calendar_prescaler {
-    /** RTC input clock frequency is prescaled by a factor of 1. */
-    RTC_CALENDAR_PRESCALER_DIV_1    = RTC_MODE2_CTRL_PRESCALER_DIV1,
-    /** RTC input clock frequency is prescaled by a factor of 2. */
-    RTC_CALENDAR_PRESCALER_DIV_2    = RTC_MODE2_CTRL_PRESCALER_DIV2,
-    /** RTC input clock frequency is prescaled by a factor of 4. */
-    RTC_CALENDAR_PRESCALER_DIV_4    = RTC_MODE2_CTRL_PRESCALER_DIV4,
-    /** RTC input clock frequency is prescaled by a factor of 8. */
-    RTC_CALENDAR_PRESCALER_DIV_8    = RTC_MODE2_CTRL_PRESCALER_DIV8,
-    /** RTC input clock frequency is prescaled by a factor of 16. */
-    RTC_CALENDAR_PRESCALER_DIV_16   = RTC_MODE2_CTRL_PRESCALER_DIV16,
-    /** RTC input clock frequency is prescaled by a factor of 32. */
-    RTC_CALENDAR_PRESCALER_DIV_32   = RTC_MODE2_CTRL_PRESCALER_DIV32,
-    /** RTC input clock frequency is prescaled by a factor of 64. */
-    RTC_CALENDAR_PRESCALER_DIV_64   = RTC_MODE2_CTRL_PRESCALER_DIV64,
-    /** RTC input clock frequency is prescaled by a factor of 128. */
-    RTC_CALENDAR_PRESCALER_DIV_128  = RTC_MODE2_CTRL_PRESCALER_DIV128,
-    /** RTC input clock frequency is prescaled by a factor of 256. */
-    RTC_CALENDAR_PRESCALER_DIV_256  = RTC_MODE2_CTRL_PRESCALER_DIV256,
-    /** RTC input clock frequency is prescaled by a factor of 512. */
-    RTC_CALENDAR_PRESCALER_DIV_512  = RTC_MODE2_CTRL_PRESCALER_DIV512,
-    /** RTC input clock frequency is prescaled by a factor of 1024. */
-    RTC_CALENDAR_PRESCALER_DIV_1024 = RTC_MODE2_CTRL_PRESCALER_DIV1024,
-};
-#endif
-
-#if !defined(__DOXYGEN__)
-/**
- * \brief Device structure.
- */
-struct rtc_module {
-    /** RTC hardware module. */
-    Rtc *hw;
-    /** If clock mode 24h. */
-    bool clock_24h;
-#ifdef FEATURE_RTC_CONTINUOUSLY_UPDATED
-    /** If continuously update clock register. */
-    bool continuously_update;
-#endif
-    /** Initial year for counter value 0. */
-    uint16_t year_init_value;
-#  if RTC_CALENDAR_ASYNC == true
-    /** Pointers to callback functions. */
-    volatile rtc_calendar_callback_t callbacks[_RTC_CALENDAR_CALLBACK_N];
-    /** Mask for registered callbacks. */
-    volatile uint16_t registered_callback;
-    /** Mask for enabled callbacks. */
-    volatile uint16_t enabled_callback;
-#  endif
-};
-#endif
-
-/**
- * \brief Available mask options for alarms.
- *
- * Available mask options for alarms.
- */
-enum rtc_calendar_alarm_mask {
-    /** Alarm disabled. */
-    RTC_CALENDAR_ALARM_MASK_DISABLED = RTC_MODE2_MASK_SEL_OFF,
-    /** Alarm match on second. */
-    RTC_CALENDAR_ALARM_MASK_SEC      = RTC_MODE2_MASK_SEL_SS,
-    /** Alarm match on second and minute. */
-    RTC_CALENDAR_ALARM_MASK_MIN      = RTC_MODE2_MASK_SEL_MMSS,
-    /** Alarm match on second, minute, and hour. */
-    RTC_CALENDAR_ALARM_MASK_HOUR     = RTC_MODE2_MASK_SEL_HHMMSS,
-    /** Alarm match on second, minute, hour, and day. */
-    RTC_CALENDAR_ALARM_MASK_DAY      = RTC_MODE2_MASK_SEL_DDHHMMSS,
-    /** Alarm match on second, minute, hour, day, and month. */
-    RTC_CALENDAR_ALARM_MASK_MONTH    = RTC_MODE2_MASK_SEL_MMDDHHMMSS,
-    /** Alarm match on second, minute, hour, day, month, and year. */
-    RTC_CALENDAR_ALARM_MASK_YEAR     = RTC_MODE2_MASK_SEL_YYMMDDHHMMSS,
-};
-
-/**
- * \brief RTC Calendar event enable/disable structure.
- *
- * Event flags for the \ref rtc_calendar_enable_events() and
- * \ref rtc_calendar_disable_events().
- */
-struct rtc_calendar_events {
-    /** Generate an output event on each overflow of the RTC count. */
-    bool generate_event_on_overflow;
-    /** Generate an output event on a alarm channel match against the RTC
-     *  count. */
-    bool generate_event_on_alarm[RTC_NUM_OF_ALARMS];
-    /** Generate an output event periodically at a binary division of the RTC
-     *  counter frequency.
-     */
-    bool generate_event_on_periodic[8];
-};
-
-/**
- * \brief Time structure.
- *
- * Time structure containing the time given by or set to the RTC calendar.
- * The structure uses seven values to give second, minute, hour, PM/AM, day,
- * month, and year. It should be initialized via the
- * \ref rtc_calendar_get_time_defaults() function before use.
- */
-struct rtc_calendar_time {
-    /** Second value. */
-    uint8_t  second;
-    /** Minute value. */
-    uint8_t  minute;
-    /** Hour value. */
-    uint8_t  hour;
-    /** PM/AM value, \c true for PM, or \c false for AM. */
-    bool     pm;
-    /** Day value, where day 1 is the first day of the month. */
-    uint8_t  day;
-    /** Month value, where month 1 is January. */
-    uint8_t  month;
-    /** Year value.*/
-    uint16_t year;
-};
-
-/**
- * \brief Alarm structure.
- *
- * Alarm structure containing time of the alarm and a mask to determine when
- * the alarm will trigger.
- */
-struct rtc_calendar_alarm_time {
-    /** Alarm time. */
-    struct rtc_calendar_time time;
-    /** Alarm mask to determine on what precision the alarm will match. */
-    enum rtc_calendar_alarm_mask mask;
-};
-
-/**
- * \brief RTC configuration structure.
- *
- * Configuration structure for the RTC instance. This structure should
- * be initialized using the \ref rtc_calendar_get_config_defaults() before any
- * user configurations are set.
- */
-struct rtc_calendar_config {
-    /** Input clock prescaler for the RTC module. */
-    enum rtc_calendar_prescaler prescaler;
-    /** If \c true, clears the clock on alarm match. */
-    bool clear_on_match;
-#ifdef FEATURE_RTC_CONTINUOUSLY_UPDATED
-    /** If \c true, the digital counter registers will be continuously updated
-     *  so that internal synchronization is not needed when reading the current
-     *  count. */
-    bool continuously_update;
-#endif
-    /** If \c true, time is represented in 24 hour mode. */
-    bool clock_24h;
-    /** Initial year for counter value 0. */
-    uint16_t year_init_value;
-    /** Alarm values. */
-    struct rtc_calendar_alarm_time alarm[RTC_NUM_OF_ALARMS];
-};
-
-
-/**
- * \name Configuration and Initialization
- * @{
- */
-
-/**
- * \brief Initialize a \c time structure.
- *
- * This will initialize a given time structure to the time 00:00:00 (hh:mm:ss)
- * and date 2000-01-01 (YYYY-MM-DD).
- *
- * \param[out] time  Time structure to initialize
- */
-static inline void rtc_calendar_get_time_defaults(
-    struct rtc_calendar_time *const time)
-{
-    time->second = 0;
-    time->minute = 0;
-    time->hour   = 0;
-    time->pm     = 0;
-    time->day 	 = 1;
-    time->month  = 1;
-    time->year   = 2000;
-}
-
-/**
- * \brief Gets the RTC default settings.
- *
- * Initializes the configuration structure to the known default values. This
- * function should be called at the start of any RTC initiation.
- *
- * The default configuration is as follows:
- *  - Input clock divided by a factor of 1024
- *  - Clear on alarm match off
- *  - Continuously sync clock off
- *  - 12 hour calendar
- *  - Start year 2000 (Year 0 in the counter will be year 2000)
- *  - Events off
- *  - Alarms set to January 1. 2000, 00:00:00
- *  - Alarm will match on second, minute, hour, day, month, and year
- *
- *  \param[out] config  Configuration structure to be initialized to default
- *                      values.
- */
-static inline void rtc_calendar_get_config_defaults(
-    struct rtc_calendar_config *const config)
-{
-    /* Sanity check argument */
-    Assert(config);
-
-    /* Initialize and set time structure to default. */
-    struct rtc_calendar_time time;
-    rtc_calendar_get_time_defaults(&time);
-
-    /* Set defaults into configuration structure */
-    config->prescaler           = RTC_CALENDAR_PRESCALER_DIV_1024;
-    config->clear_on_match      = false;
-#ifdef FEATURE_RTC_CONTINUOUSLY_UPDATED
-    config->continuously_update = false;
-#endif
-    config->clock_24h           = false;
-    config->year_init_value     = 2000;
-    for (uint8_t i = 0; i < RTC_NUM_OF_ALARMS; i++) {
-        config->alarm[i].time = time;
-        config->alarm[i].mask = RTC_CALENDAR_ALARM_MASK_YEAR;
-    }
-}
-
-void rtc_calendar_reset(struct rtc_module *const module);
-void rtc_calendar_enable(struct rtc_module *const module);
-void rtc_calendar_disable(struct rtc_module *const module);
-
-#if (RTC_INST_NUM > 1) && !defined(__DOXYGEN__)
-/**
- * \internal Find the index of given RTC module instance.
- *
- * \param[in] hw  RTC module instance pointer
- *
- * \return Index of the given RTC module instance.
- */
-uint8_t _rtc_get_inst_index(
-    Rtc *const hw)
-{
-    /* List of available RTC modules. */
-    static Rtc *const rtc_modules[RTC_INST_NUM] = RTC_INSTS;
-
-    /* Find index for RTC instance. */
-    for (uint32_t i = 0; i < RTC_INST_NUM; i++) {
-        if (hw == rtc_modules[i]) {
-            return i;
-        }
-    }
-
-    /* Invalid data given. */
-    Assert(false);
-    return 0;
-}
-#endif /* (RTC_INST_NUM > 1) && !defined(__DOXYGEN__) */
-
-void rtc_calendar_init(
-    struct rtc_module *const module,
-    Rtc *const hw,
-    const struct rtc_calendar_config *const config);
-
-void rtc_calendar_swap_time_mode(struct rtc_module *const module);
-
-enum status_code rtc_calendar_frequency_correction(
-    struct rtc_module *const module,
-    const int8_t value);
-
-/** @} */
-
-
-/** \name Time and Alarm Management
- * @{
- */
-
-void rtc_calendar_set_time(
-    struct rtc_module *const module,
-    const struct rtc_calendar_time *const time);
-
-void rtc_calendar_get_time(
-    struct rtc_module *const module,
-    struct rtc_calendar_time *const time);
-
-enum status_code rtc_calendar_set_alarm(
-    struct rtc_module *const module,
-    const struct rtc_calendar_alarm_time *const alarm,
-    const enum rtc_calendar_alarm alarm_index);
-
-enum status_code rtc_calendar_get_alarm(
-    struct rtc_module *const module,
-    struct rtc_calendar_alarm_time *const alarm,
-    const enum rtc_calendar_alarm alarm_index);
-
-/** @} */
-
-
-/** \name Status Flag Management
- * @{
- */
-
-/**
- * \brief Check if an RTC overflow has occurred.
- *
- * Checks the overflow flag in the RTC. The flag is set when there
- * is an overflow in the clock.
- *
- * \param[in,out] module  Pointer to the software instance struct
- *
- * \return Overflow state of the RTC module.
- *
- * \retval true   If the RTC count value has overflowed
- * \retval false  If the RTC count value has not overflowed
- */
-static inline bool rtc_calendar_is_overflow(struct rtc_module *const module)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    /* Return status of flag. */
-    return (rtc_module->MODE2.INTFLAG.reg & RTC_MODE2_INTFLAG_OVF);
-}
-
-/**
- * \brief Clears the RTC overflow flag.
- *
- * \param[in,out] module  Pointer to the software instance struct
- *
- * Clears the RTC module counter overflow flag, so that new overflow conditions
- * can be detected.
- */
-static inline void rtc_calendar_clear_overflow(struct rtc_module *const module)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    /* Clear flag. */
-    rtc_module->MODE2.INTFLAG.reg = RTC_MODE2_INTFLAG_OVF;
-}
-
-/**
- * \brief Check the RTC alarm flag.
- *
- * Check if the specified alarm flag is set. The flag is set when there
- * is an compare match between the alarm value and the clock.
- *
- * \param[in,out] module  Pointer to the software instance struct
- * \param[in] alarm_index  Index of the alarm to check
- *
- * \returns Match status of the specified alarm.
- *
- * \retval true   If the specified alarm has matched the current time
- * \retval false  If the specified alarm has not matched the current time
- */
-static inline bool rtc_calendar_is_alarm_match(
-    struct rtc_module *const module,
-    const enum rtc_calendar_alarm alarm_index)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    /* Sanity check. */
-    if ((uint32_t)alarm_index > RTC_NUM_OF_ALARMS) {
-        Assert(false);
-        return false;
-    }
-
-    /* Return int flag status. */
-    return (rtc_module->MODE2.INTFLAG.reg & RTC_MODE2_INTFLAG_ALARM(1 << alarm_index));
-}
-
-/**
- * \brief Clears the RTC alarm match flag.
- *
- * Clear the requested alarm match flag, so that future alarm matches can be
- * determined.
- *
- * \param[in,out] module  Pointer to the software instance struct
- * \param[in] alarm_index  The index of the alarm match to clear
- *
- * \return Status of the alarm match clear operation.
- *
- * \retval STATUS_OK               If flag was cleared correctly
- * \retval STATUS_ERR_INVALID_ARG  If invalid argument(s) were provided
- */
-static inline enum status_code rtc_calendar_clear_alarm_match(
-    struct rtc_module *const module,
-    const enum rtc_calendar_alarm alarm_index)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    /* Sanity check. */
-    if ((uint32_t)alarm_index > RTC_NUM_OF_ALARMS) {
-        Assert(false);
-        return STATUS_ERR_INVALID_ARG;
-    }
-
-    /* Clear flag. */
-    rtc_module->MODE2.INTFLAG.reg = RTC_MODE2_INTFLAG_ALARM(1 << alarm_index);
-
-    return STATUS_OK;
-}
-
-/** @} */
-
-
-/**
- * \name Event Management
- * @{
- */
-
-/**
- * \brief Enables a RTC event output.
- *
- *  Enables one or more output events from the RTC module. See
- *  \ref rtc_calendar_events for a list of events this module supports.
- *
- *  \note Events cannot be altered while the module is enabled.
- *
- *  \param[in,out] module  Pointer to the software instance struct
- *  \param[in] events    Struct containing flags of events to enable
- */
-static inline void rtc_calendar_enable_events(
-    struct rtc_module *const module,
-    struct rtc_calendar_events *const events)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    uint32_t event_mask = 0;
-
-    /* Check if the user has requested an overflow event. */
-    if (events->generate_event_on_overflow) {
-        event_mask |= RTC_MODE2_EVCTRL_OVFEO;
-    }
-
-    /* Check if the user has requested any alarm events. */
-    for (uint8_t i = 0; i < RTC_NUM_OF_ALARMS; i++) {
-        if (events->generate_event_on_alarm[i]) {
-            event_mask |= RTC_MODE2_EVCTRL_ALARMEO(1 << i);
-        }
-    }
-
-    /* Check if the user has requested any periodic events. */
-    for (uint8_t i = 0; i < 8; i++) {
-        if (events->generate_event_on_periodic[i]) {
-            event_mask |= RTC_MODE2_EVCTRL_PEREO(1 << i);
-        }
-    }
-
-    /* Enable given event(s). */
-    rtc_module->MODE2.EVCTRL.reg |= event_mask;
-}
-
-/**
- * \brief Disables a RTC event output.
- *
- *  Disabled one or more output events from the RTC module. See
- *  \ref rtc_calendar_events for a list of events this module supports.
- *
- *  \note Events cannot be altered while the module is enabled.
- *
- *  \param[in,out] module  Pointer to the software instance struct
- *  \param[in] events    Struct containing flags of events to disable
- */
-static inline void rtc_calendar_disable_events(
-    struct rtc_module *const module,
-    struct rtc_calendar_events *const events)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-
-    Rtc *const rtc_module = module->hw;
-
-    uint32_t event_mask = 0;
-
-    /* Check if the user has requested an overflow event. */
-    if (events->generate_event_on_overflow) {
-        event_mask |= RTC_MODE2_EVCTRL_OVFEO;
-    }
-
-    /* Check if the user has requested any alarm events. */
-    for (uint8_t i = 0; i < RTC_NUM_OF_ALARMS; i++) {
-        if (events->generate_event_on_alarm[i]) {
-            event_mask |= RTC_MODE2_EVCTRL_ALARMEO(1 << i);
-        }
-    }
-
-    /* Check if the user has requested any periodic events. */
-    for (uint8_t i = 0; i < 8; i++) {
-        if (events->generate_event_on_periodic[i]) {
-            event_mask |= RTC_MODE2_EVCTRL_PEREO(1 << i);
-        }
-    }
-
-    /* Disable given event(s). */
-    rtc_module->MODE2.EVCTRL.reg &= ~event_mask;
-}
-
-/** @} */
-
-#ifdef FEATURE_RTC_GENERAL_PURPOSE_REG
-/**
- * \name RTC General Purpose Registers
- * @{
- */
-
-/**
- * \brief Write a value into general purpose register.
- *
- * \param[in] module  Pointer to the software instance struct
- * \param[in] n  General purpose type
- * \param[in] index General purpose register index (0..3)
- *
- */
-static inline void rtc_write_general_purpose_reg(
-    struct rtc_module *const module,
-    const  uint8_t index,
-    uint32_t value)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-    Assert(index <= 3);
-
-    Rtc *const rtc_module = module->hw;
-
-    rtc_module->MODE0.GP[index].reg = value;
-}
-
-/**
- * \brief Read the value from general purpose register.
- *
- * \param[in] module  Pointer to the software instance struct
- * \param[in] index General purpose register index (0..3)
- *
- * \retval Value of general purpose register
- */
-static inline uint32_t rtc_read_general_purpose_reg(
-    struct rtc_module *const module,
-    const  uint8_t index)
-{
-    /* Sanity check arguments */
-    Assert(module);
-    Assert(module->hw);
-    Assert(index <= 3);
-
-    Rtc *const rtc_module = module->hw;
-
-    return rtc_module->MODE0.GP[index].reg;
-}
-
-/** @} */
-#endif
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-/**
- * \page asfdoc_sam0_rtc_calendar_extra Extra Information for RTC (CAL) Driver
- *
- * \section asfdoc_sam0_rtc_calendar_extra_acronyms Acronyms
- * Below is a table listing the acronyms used in this module, along with their
- * intended meanings.
- *
- * <table>
- *	<tr>
- *		<th>Acronym</td>
- *		<th>Description</td>
- *	</tr>
- *	<tr>
- *		<td>RTC</td>
- *		<td>Real Time Counter</td>
- *	</tr>
- *	<tr>
- *		<td>PPM</td>
- *		<td>Part Per Million</td>
- *	</tr>
- *	<tr>
- *		<td>RC</td>
- *		<td>Resistor/Capacitor</td>
- *	</tr>
- * </table>
- *
- *
- * \section asfdoc_sam0_rtc_calendar_extra_dependencies Dependencies
- * This driver has the following dependencies:
- *
- *  - None
- *
- *
- * \section asfdoc_sam0_rtc_calendar_extra_errata Errata
- * There are no errata related to this driver.
- *
- *
- * \section asfdoc_sam0_rtc_calendar_extra_history Module History
- * An overview of the module history is presented in the table below, with
- * details on the enhancements and fixes made to the module since its first
- * release. The current version of this corresponds to the newest version in
- * the table.
- *
- * <table>
- *	<tr>
- *		<th>Changelog</th>
- *	</tr>
- *	<tr>
- *		<td>Added support for SAML21.</td>
- *	</tr>
- *	<tr>
- *		<td>
- *             Added support for SAMD21 and added driver instance parameter to all
- *             API function calls, except get_config_defaults
- *             </td>
- *	</tr>
- *	<tr>
- *		<td>Updated initialization function to also enable the digital interface
- *          clock to the module if it is disabled</td>
- *	</tr>
- *	<tr>
- *		<td>Initial Release</td>
- *	</tr>
- * </table>
- */
-
-/**
- * \page asfdoc_sam0_rtc_calendar_exqsg Examples for RTC CAL Driver
- *
- * This is a list of the available Quick Start guides (QSGs) and example
- * applications for \ref asfdoc_sam0_rtc_calendar_group. QSGs are simple
- * examples with step-by-step instructions to configure and use this driver in a
- * selection of use cases. Note that QSGs can be compiled as a standalone
- * application or be added to the user application.
- *
- *  - \subpage asfdoc_sam0_rtc_calendar_basic_use_case
- * \if RTC_CALENDAR_CALLBACK_MODE
- *  - \subpage asfdoc_sam0_rtc_calendar_callback_use_case
- * \endif
- *
- * \page asfdoc_sam0_rtc_calendar_document_revision_history Document Revision History
- *
- * <table>
- *	<tr>
- *		<th>Doc. Rev.</td>
- *		<th>Date</td>
- *		<th>Comments</td>
- *	</tr>
- *	<tr>
- *		<td>E</td>
- *		<td>11/2014</td>
- *		<td>Added support for SAML21.</td>
- *	</tr>
- *	<tr>
- *		<td>D</td>
- *		<td>12/2014</td>
- *		<td>Added support for SAMR21 and SAMD10/D11.</td>
- *	</tr>
- *	<tr>
- *		<td>C</td>
- *		<td>01/2014</td>
- *		<td>Added support for SAMD21.</td>
- *	</tr>
- *	<tr>
- *		<td>B</td>
- *		<td>06/2013</td>
- *		<td>Added additional documentation on the event system. Corrected
- *          documentation typos.</td>
- *	</tr>
- *	<tr>
- *		<td>A</td>
- *		<td>06/2013</td>
- *		<td>Initial release</td>
- *	</tr>
- * </table>
- */
-
-#endif /* RTC_CALENDAR_H_INCLUDED */
-