mbed official / mbed-src

mbed library sources

Dependents:   Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more

Superseded

This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.

Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.

If you are looking for a stable and tested release, please import one of the official mbed library releases:

Import librarymbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Last commit 20 Feb 2019 by mbed official

Diff: targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard.c

Revision:
610:813dcc80987e
Parent:
573:ad23fe03a082
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard.c	Fri Aug 14 12:45:09 2015 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard.c	Fri Aug 14 13:15:17 2015 +0100
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f7xx_hal_smartcard.c
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    12-May-2015
+  * @version V1.0.1
+  * @date    25-June-2015
   * @brief   SMARTCARD HAL module driver.
   *          This file provides firmware functions to manage the following
   *          functionalities of the SMARTCARD peripheral:
@@ -29,9 +29,9 @@
              and HAL_SMARTCARD_Receive_IT() APIs):
             (+++) Configure the USARTx interrupt priority.
             (+++) Enable the NVIC USART IRQ handle.
-            (@) The specific USART interrupts (Transmission complete interrupt, 
-                RXNE interrupt and Error Interrupts) will be managed using the macros
-                __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+            (+++) The specific USART interrupts (Transmission complete interrupt, 
+                  RXNE interrupt and Error Interrupts) will be managed using the macros
+                  __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
         (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
              and HAL_SMARTCARD_Receive_DMA() APIs):
             (+++) Declare a DMA handle structure for the Tx/Rx stream.
@@ -49,8 +49,9 @@
         in the hsc AdvancedInit structure.
 
     (#) Initialize the SMARTCARD associated USART registers by calling
-        the HAL_SMARTCARD_Init() API.                                 
-        
+        the HAL_SMARTCARD_Init() API. 
+    
+  [..]
     (@) HAL_SMARTCARD_Init() API also configure also the low level Hardware GPIO, CLOCK, CORTEX...etc) by 
         calling the customized HAL_SMARTCARD_MspInit() API.
           
@@ -150,11 +151,13 @@
         (++) Parity: parity should be enabled,
              Frame Length is fixed to 8 bits plus parity:
              the USART frame format is given in the following table:
-   +---------------------------------------------------------------+
-   | M1M0 bits |  PCE bit  |            USART frame                |
-   |-----------------------|---------------------------------------|
-   |     01    |    1      |    | SB | 8 bit data | PB | STB |     |
-   +---------------------------------------------------------------+
+
+        (+++) +---------------------------------------------------------------+
+        (+++) | M1M0 bits |  PCE bit  |            USART frame                |
+        (+++) |-----------------------|---------------------------------------|
+        (+++) |     01    |    1      |    | SB | 8 bit data | PB | STB |     |
+        (+++) +---------------------------------------------------------------+
+
         (++) Receiver/transmitter modes
         (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
         (++) Prescaler value