Diff: targets/hal/TARGET_NXP/TARGET_LPC11XX/PinNames.h

Revision:

19:398f4c622e1b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX/PinNames.h	Mon Aug 19 18:17:02 2013 +0300
@@ -0,0 +1,233 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  12
+#define PIN_SHIFT   8
+
+typedef enum {
+    // LPC1114 Pin Names (PORT[15:12] + PIN[11:8] + IOCON offset[7:0])
+
+    P0_0  = (0 << PORT_SHIFT) | (0  << PIN_SHIFT) | 0x0c,
+    P0_1  = (0 << PORT_SHIFT) | (1  << PIN_SHIFT) | 0x10,
+    P0_2  = (0 << PORT_SHIFT) | (2  << PIN_SHIFT) | 0x1c,
+    P0_3  = (0 << PORT_SHIFT) | (3  << PIN_SHIFT) | 0x2c,
+    P0_4  = (0 << PORT_SHIFT) | (4  << PIN_SHIFT) | 0x30,
+    P0_5  = (0 << PORT_SHIFT) | (5  << PIN_SHIFT) | 0x34,
+    P0_6  = (0 << PORT_SHIFT) | (6  << PIN_SHIFT) | 0x4c,
+    P0_7  = (0 << PORT_SHIFT) | (7  << PIN_SHIFT) | 0x50,
+    P0_8  = (0 << PORT_SHIFT) | (8  << PIN_SHIFT) | 0x60,
+    P0_9  = (0 << PORT_SHIFT) | (9  << PIN_SHIFT) | 0x64,
+    P0_11 = (0 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x74,
+
+    P1_0  = (1 << PORT_SHIFT) | (0  << PIN_SHIFT) | 0x78,
+    P1_1  = (1 << PORT_SHIFT) | (1  << PIN_SHIFT) | 0x7c,
+    P1_2  = (1 << PORT_SHIFT) | (2  << PIN_SHIFT) | 0x80,
+    P1_4  = (1 << PORT_SHIFT) | (4  << PIN_SHIFT) | 0x94,
+    P1_5  = (1 << PORT_SHIFT) | (5  << PIN_SHIFT) | 0xa0,
+    P1_6  = (1 << PORT_SHIFT) | (6  << PIN_SHIFT) | 0xa4,
+    P1_7  = (1 << PORT_SHIFT) | (7  << PIN_SHIFT) | 0xa8,
+    P1_8  = (1 << PORT_SHIFT) | (8  << PIN_SHIFT) | 0x14,
+    P1_9  = (1 << PORT_SHIFT) | (9  << PIN_SHIFT) | 0x38,
+    P1_10 = (1 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x6c,
+    P1_11 = (1 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x98,
+
+    P2_0  = (2 << PORT_SHIFT) | (0  << PIN_SHIFT) | 0x08,
+    P2_1  = (2 << PORT_SHIFT) | (1  << PIN_SHIFT) | 0x28,
+    P2_2  = (2 << PORT_SHIFT) | (2  << PIN_SHIFT) | 0x5c,
+    P2_3  = (2 << PORT_SHIFT) | (3  << PIN_SHIFT) | 0x8c,
+    P2_4  = (2 << PORT_SHIFT) | (4  << PIN_SHIFT) | 0x40,
+    P2_5  = (2 << PORT_SHIFT) | (5  << PIN_SHIFT) | 0x44,
+    P2_6  = (2 << PORT_SHIFT) | (6  << PIN_SHIFT) | 0x00,
+    P2_7  = (2 << PORT_SHIFT) | (7  << PIN_SHIFT) | 0x20,
+    P2_8  = (2 << PORT_SHIFT) | (8  << PIN_SHIFT) | 0x24,
+    P2_9  = (2 << PORT_SHIFT) | (9  << PIN_SHIFT) | 0x54,
+    P2_10 = (2 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x58,
+    P2_11 = (2 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x70,
+   
+    P3_0  = (3 << PORT_SHIFT) | (0  << PIN_SHIFT) | 0x84,
+    P3_1  = (3 << PORT_SHIFT) | (1  << PIN_SHIFT) | 0x88,
+    P3_2  = (3 << PORT_SHIFT) | (2  << PIN_SHIFT) | 0x9c,
+    P3_3  = (3 << PORT_SHIFT) | (3  << PIN_SHIFT) | 0xac,
+    P3_4  = (3 << PORT_SHIFT) | (4  << PIN_SHIFT) | 0x3c,
+    P3_5  = (3 << PORT_SHIFT) | (5  << PIN_SHIFT) | 0x48,
+
+    // mbed DIP Pin Names (CQ board)
+    p4  = P0_0,
+    p5  = P0_9,
+    p6  = P0_8,
+    p7  = P0_6,
+    p8  = P1_5,
+    p9  = P1_7,
+    p10 = P1_6,
+    p11 = P0_7,
+    p12 = P1_0,
+    p13 = P1_1,
+    p14 = P1_2,
+    p15 = P0_11,
+    p16 = P1_0,
+    p17 = P1_1,
+    p18 = P1_2,
+    p20 = P1_4,
+    p22 = P0_2,
+    p23 = P0_11,
+    p24 = P0_2,
+    p25 = P1_8,
+    p26 = P1_9,
+    p27 = P0_4,
+    p28 = P0_5,
+    p29 = P0_3,
+    p30 = P0_1,
+
+    // Other mbed Pin Names
+    LED1 = P1_5,
+    LED2 = P0_7,
+    LED3 = P1_5,
+    LED4 = P0_7,
+
+    USBTX = P1_7,
+    USBRX = P1_6,
+
+    // mbed DIP Pin Names (LPCXpresso LPC1114)
+    xp4  = P0_0,
+    xp5  = P0_9,
+    xp6  = P0_8,
+    xp7  = P2_11,
+    xp8  = P0_2,
+    xp9  = P1_7,
+    xp10 = P1_6,
+    xp11 = P0_7,
+    xp12 = P2_0,
+    xp13 = P2_1,
+    xp14 = P2_2,
+    xp15 = P0_11,
+    xp16 = P1_0,
+    xp17 = P1_1,
+    xp18 = P1_2,
+    xp20 = P1_4,
+    xp21 = P1_5,
+    xp22 = P1_8,
+    xp23 = P0_6,
+    xp25 = P3_0,
+    xp26 = P3_1,
+    xp27 = P3_2,
+
+    xp29 = P3_3,
+    xp30 = P2_10,
+    xp31 = P2_9,
+    xp32 = P2_8,
+    xp33 = P2_7,
+    xp34 = P2_6,
+    xp35 = P2_5,
+    xp36 = P2_4,
+    xp37 = P2_3,
+    xp38 = P1_11,
+    xp39 = P1_10,
+    xp40 = P1_9,
+    xp41 = P0_4,
+    xp42 = P0_5,
+    xp43 = P0_3,
+    xp44 = P0_1,
+
+    // Other mbed Pin Names
+    xLED1 = P0_7,
+	
+	// DIP Package Names
+	
+	dp1  = P0_8,
+	dp2  = P0_9,
+	dp4  = P0_11,
+	dp5  = P0_5,
+	dp6  = P0_6,
+	dp9  = P1_0,
+	dp10 = P1_1,
+	dp11 = P1_2,
+	dp13 = P1_4,
+	dp14 = P1_5,
+	dp15 = P1_6,
+	dp16 = P1_7,
+	dp17 = P1_8,
+	dp18 = P1_9,
+	dp23 = P0_0,
+	dp24 = P0_1,
+	dp25 = P0_2,
+	dp26 = P0_3,
+	dp27 = P0_4,
+	dp28 = P0_7,
+	
+	dip1  = P0_8,
+	dip2  = P0_9,
+	dip4  = P0_11,
+	dip5  = P0_5,
+	dip6  = P0_6,
+	dip9  = P1_0,
+	dip10 = P1_1,
+	dip11 = P1_2,
+	dip13 = P1_4,
+	dip14 = P1_5,
+	dip15 = P1_6,
+	dip16 = P1_7,
+	dip17 = P1_8,
+	dip18 = P1_9,
+	dip23 = P0_0,
+	dip24 = P0_1,
+	dip25 = P0_2,
+	dip26 = P0_3,
+	dip27 = P0_4,
+	dip28 = P0_7,
+	
+	
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    CHANNEL0 = WAKEUP0_IRQn,
+    CHANNEL1 = WAKEUP1_IRQn,
+    CHANNEL2 = WAKEUP2_IRQn,
+    CHANNEL3 = WAKEUP3_IRQn,
+    CHANNEL4 = WAKEUP4_IRQn,
+    CHANNEL5 = WAKEUP5_IRQn,
+    CHANNEL6 = WAKEUP6_IRQn,
+    CHANNEL7 = WAKEUP7_IRQn
+} Channel;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif