Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F302R8/stm32f30x_gpio.h

Revision:

125:23cc3068a9e4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F302R8/stm32f30x_gpio.h	Wed Mar 19 10:15:22 2014 +0000
@@ -0,0 +1,410 @@
+/**
+  ******************************************************************************
+  * @file    stm32f30x_gpio.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    27-February-2014
+  * @brief   This file contains all the functions prototypes for the GPIO 
+  *          firmware library. 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F30x_GPIO_H
+#define __STM32F30x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f30x.h"
+
+/** @addtogroup STM32F30x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+ 
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+                                    ((PERIPH) == GPIOB) || \
+                                    ((PERIPH) == GPIOC) || \
+                                    ((PERIPH) == GPIOD) || \
+                                    ((PERIPH) == GPIOE) || \
+                                    ((PERIPH) == GPIOF))  
+                                    
+#define IS_GPIO_LIST_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+                                     ((PERIPH) == GPIOB) || \
+                                     ((PERIPH) == GPIOD))  
+/** @defgroup Configuration_Mode_enumeration 
+  * @{
+  */ 
+typedef enum
+{ 
+  GPIO_Mode_IN   = 0x00, /*!< GPIO Input Mode */
+  GPIO_Mode_OUT  = 0x01, /*!< GPIO Output Mode */
+  GPIO_Mode_AF   = 0x02, /*!< GPIO Alternate function Mode */
+  GPIO_Mode_AN   = 0x03  /*!< GPIO Analog In/Out Mode      */
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN)|| ((MODE) == GPIO_Mode_OUT) || \
+                            ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
+/**
+  * @}
+  */
+  
+/** @defgroup Output_type_enumeration
+  * @{
+  */ 
+typedef enum
+{ 
+  GPIO_OType_PP = 0x00,
+  GPIO_OType_OD = 0x01
+}GPIOOType_TypeDef;
+
+#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
+
+/**
+  * @}
+  */
+
+/** @defgroup Output_Maximum_frequency_enumeration 
+  * @{
+  */ 
+typedef enum
+{ 
+  GPIO_Speed_Level_1  = 0x01, /*!< Fast Speed     */
+  GPIO_Speed_Level_2  = 0x02, /*!< Meduim Speed   */
+  GPIO_Speed_Level_3  = 0x03  /*!< High Speed     */
+}GPIOSpeed_TypeDef;
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_Level_1) || ((SPEED) == GPIO_Speed_Level_2) || \
+                              ((SPEED) == GPIO_Speed_Level_3))
+/**
+  * @}
+  */  
+
+/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration 
+  * @{
+  */ 
+typedef enum
+{
+  GPIO_PuPd_NOPULL = 0x00,
+  GPIO_PuPd_UP     = 0x01,
+  GPIO_PuPd_DOWN   = 0x02
+}GPIOPuPd_TypeDef;
+
+#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
+                            ((PUPD) == GPIO_PuPd_DOWN))
+/**
+  * @}
+  */
+
+/** @defgroup Bit_SET_and_Bit_RESET_enumeration
+  * @{
+  */
+typedef enum
+{ 
+  Bit_RESET = 0,
+  Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+/**
+  * @}
+  */
+
+/** 
+  * @brief  GPIO Init structure definition  
+  */ 
+typedef struct
+{
+  uint32_t GPIO_Pin;              /*!< Specifies the GPIO pins to be configured.
+                                       This parameter can be any value of @ref GPIO_pins_define */
+                                       
+  GPIOMode_TypeDef GPIO_Mode;     /*!< Specifies the operating mode for the selected pins.
+                                       This parameter can be a value of @ref GPIOMode_TypeDef   */
+
+  GPIOSpeed_TypeDef GPIO_Speed;   /*!< Specifies the speed for the selected pins.
+                                       This parameter can be a value of @ref GPIOSpeed_TypeDef  */
+
+  GPIOOType_TypeDef GPIO_OType;   /*!< Specifies the operating output type for the selected pins.
+                                       This parameter can be a value of @ref GPIOOType_TypeDef  */
+
+  GPIOPuPd_TypeDef GPIO_PuPd;     /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+                                       This parameter can be a value of @ref GPIOPuPd_TypeDef   */
+}GPIO_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+  * @{
+  */ 
+  
+/** @defgroup GPIO_pins_define 
+  * @{
+  */
+#define GPIO_Pin_0                 ((uint16_t)0x0001)  /*!< Pin 0 selected    */
+#define GPIO_Pin_1                 ((uint16_t)0x0002)  /*!< Pin 1 selected    */
+#define GPIO_Pin_2                 ((uint16_t)0x0004)  /*!< Pin 2 selected    */
+#define GPIO_Pin_3                 ((uint16_t)0x0008)  /*!< Pin 3 selected    */
+#define GPIO_Pin_4                 ((uint16_t)0x0010)  /*!< Pin 4 selected    */
+#define GPIO_Pin_5                 ((uint16_t)0x0020)  /*!< Pin 5 selected    */
+#define GPIO_Pin_6                 ((uint16_t)0x0040)  /*!< Pin 6 selected    */
+#define GPIO_Pin_7                 ((uint16_t)0x0080)  /*!< Pin 7 selected    */
+#define GPIO_Pin_8                 ((uint16_t)0x0100)  /*!< Pin 8 selected    */
+#define GPIO_Pin_9                 ((uint16_t)0x0200)  /*!< Pin 9 selected    */
+#define GPIO_Pin_10                ((uint16_t)0x0400)  /*!< Pin 10 selected   */
+#define GPIO_Pin_11                ((uint16_t)0x0800)  /*!< Pin 11 selected   */
+#define GPIO_Pin_12                ((uint16_t)0x1000)  /*!< Pin 12 selected   */
+#define GPIO_Pin_13                ((uint16_t)0x2000)  /*!< Pin 13 selected   */
+#define GPIO_Pin_14                ((uint16_t)0x4000)  /*!< Pin 14 selected   */
+#define GPIO_Pin_15                ((uint16_t)0x8000)  /*!< Pin 15 selected   */
+#define GPIO_Pin_All               ((uint16_t)0xFFFF)  /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+                              ((PIN) == GPIO_Pin_1) || \
+                              ((PIN) == GPIO_Pin_2) || \
+                              ((PIN) == GPIO_Pin_3) || \
+                              ((PIN) == GPIO_Pin_4) || \
+                              ((PIN) == GPIO_Pin_5) || \
+                              ((PIN) == GPIO_Pin_6) || \
+                              ((PIN) == GPIO_Pin_7) || \
+                              ((PIN) == GPIO_Pin_8) || \
+                              ((PIN) == GPIO_Pin_9) || \
+                              ((PIN) == GPIO_Pin_10) || \
+                              ((PIN) == GPIO_Pin_11) || \
+                              ((PIN) == GPIO_Pin_12) || \
+                              ((PIN) == GPIO_Pin_13) || \
+                              ((PIN) == GPIO_Pin_14) || \
+                              ((PIN) == GPIO_Pin_15))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Pin_sources 
+  * @{
+  */ 
+#define GPIO_PinSource0            ((uint8_t)0x00)
+#define GPIO_PinSource1            ((uint8_t)0x01)
+#define GPIO_PinSource2            ((uint8_t)0x02)
+#define GPIO_PinSource3            ((uint8_t)0x03)
+#define GPIO_PinSource4            ((uint8_t)0x04)
+#define GPIO_PinSource5            ((uint8_t)0x05)
+#define GPIO_PinSource6            ((uint8_t)0x06)
+#define GPIO_PinSource7            ((uint8_t)0x07)
+#define GPIO_PinSource8            ((uint8_t)0x08)
+#define GPIO_PinSource9            ((uint8_t)0x09)
+#define GPIO_PinSource10           ((uint8_t)0x0A)
+#define GPIO_PinSource11           ((uint8_t)0x0B)
+#define GPIO_PinSource12           ((uint8_t)0x0C)
+#define GPIO_PinSource13           ((uint8_t)0x0D)
+#define GPIO_PinSource14           ((uint8_t)0x0E)
+#define GPIO_PinSource15           ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+                                       ((PINSOURCE) == GPIO_PinSource1) || \
+                                       ((PINSOURCE) == GPIO_PinSource2) || \
+                                       ((PINSOURCE) == GPIO_PinSource3) || \
+                                       ((PINSOURCE) == GPIO_PinSource4) || \
+                                       ((PINSOURCE) == GPIO_PinSource5) || \
+                                       ((PINSOURCE) == GPIO_PinSource6) || \
+                                       ((PINSOURCE) == GPIO_PinSource7) || \
+                                       ((PINSOURCE) == GPIO_PinSource8) || \
+                                       ((PINSOURCE) == GPIO_PinSource9) || \
+                                       ((PINSOURCE) == GPIO_PinSource10) || \
+                                       ((PINSOURCE) == GPIO_PinSource11) || \
+                                       ((PINSOURCE) == GPIO_PinSource12) || \
+                                       ((PINSOURCE) == GPIO_PinSource13) || \
+                                       ((PINSOURCE) == GPIO_PinSource14) || \
+                                       ((PINSOURCE) == GPIO_PinSource15))
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Alternate_function_selection_define 
+  * @{
+  */
+
+/** 
+  * @brief  AF 0 selection
+  */ 
+#define GPIO_AF_0            ((uint8_t)0x00) /* JTCK-SWCLK, JTDI, JTDO/TRACESW0, JTMS-SWDAT,  
+                                                MCO, NJTRST, TRACED, TRACECK */
+/** 
+  * @brief  AF 1 selection
+  */ 
+#define GPIO_AF_1            ((uint8_t)0x01) /*  OUT, TIM2, TIM15, TIM16, TIM17 */
+
+/** 
+  * @brief  AF 2 selection
+  */ 
+#define GPIO_AF_2            ((uint8_t)0x02) /* COMP1_OUT, TIM1, TIM2, TIM3, TIM4, TIM8, TIM15, TIM16 */
+
+/** 
+  * @brief  AF 3 selection
+  */ 
+#define GPIO_AF_3            ((uint8_t)0x03) /* COMP7_OUT, TIM8, TIM15, Touch, HRTIM1 */
+
+/** 
+  * @brief  AF 4 selection
+  */ 
+#define GPIO_AF_4            ((uint8_t)0x04) /* I2C1, I2C2, TIM1, TIM8, TIM16, TIM17 */
+
+/** 
+  * @brief  AF 5 selection
+  */ 
+#define GPIO_AF_5            ((uint8_t)0x05) /* IR_OUT, I2S2, I2S3, SPI1, SPI2, TIM8, USART4, USART5 */
+
+/** 
+  * @brief  AF 6 selection
+  */ 
+#define GPIO_AF_6            ((uint8_t)0x06) /*  IR_OUT, I2S2, I2S3, SPI2, SPI3, TIM1, TIM8 */
+
+/** 
+  * @brief  AF 7 selection
+  */ 
+#define GPIO_AF_7            ((uint8_t)0x07) /* AOP2_OUT, CAN, COMP3_OUT, COMP5_OUT, COMP6_OUT, 
+                                                USART1, USART2, USART3 */
+
+/** 
+  * @brief  AF 8 selection
+  */ 
+#define GPIO_AF_8            ((uint8_t)0x08) /* COMP1_OUT, COMP2_OUT, COMP3_OUT, COMP4_OUT, 
+                                                COMP5_OUT, COMP6_OUT */
+
+/** 
+  * @brief  AF 9 selection
+  */ 
+#define GPIO_AF_9            ((uint8_t)0x09) /* AOP4_OUT, CAN, TIM1, TIM8, TIM15 */
+
+/** 
+  * @brief  AF 10 selection
+  */ 
+#define GPIO_AF_10            ((uint8_t)0x0A) /* AOP1_OUT, AOP3_OUT, TIM2, TIM3, TIM4, TIM8, TIM17 */
+
+/** 
+  * @brief  AF 11 selection
+  */ 
+#define GPIO_AF_11            ((uint8_t)0x0B) /* TIM1, TIM8 */
+
+/** 
+   * @brief  AF 12 selection
+   */ 
+#define GPIO_AF_12            ((uint8_t)0x0C) /* TIM1, HRTIM1 */
+
+/** 
+   * @brief  AF 13 selection
+   */ 
+#define GPIO_AF_13            ((uint8_t)0x0D) /* HRTIM1, AOP2_OUT */
+
+/** 
+  * @brief  AF 14 selection
+  */ 
+#define GPIO_AF_14            ((uint8_t)0x0E) /* USBDM, USBDP */
+
+/** 
+  * @brief  AF 15 selection
+  */ 
+#define GPIO_AF_15            ((uint8_t)0x0F) /* OUT */
+
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF_0)||((AF) == GPIO_AF_1)||\
+                          ((AF) == GPIO_AF_2)||((AF) == GPIO_AF_3)||\
+                          ((AF) == GPIO_AF_4)||((AF) == GPIO_AF_5)||\
+                          ((AF) == GPIO_AF_6)||((AF) == GPIO_AF_7)||\
+                          ((AF) == GPIO_AF_8)||((AF) == GPIO_AF_9)||\
+                          ((AF) == GPIO_AF_10)||((AF) == GPIO_AF_11)||\
+                          ((AF) == GPIO_AF_12)||((AF) == GPIO_AF_13)||\
+                          ((AF) == GPIO_AF_14)||((AF) == GPIO_AF_15))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Speed_Legacy 
+  * @{
+  */
+
+#define GPIO_Speed_10MHz GPIO_Speed_Level_1   /*!< Fast Speed:10MHz   */
+#define GPIO_Speed_2MHz  GPIO_Speed_Level_2   /*!< Medium Speed:2MHz  */
+#define GPIO_Speed_50MHz GPIO_Speed_Level_3   /*!< High Speed:50MHz   */
+
+/**
+  * @}
+  */
+ 
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */ 
+/* Function used to set the GPIO configuration to the default reset state *****/
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+
+/* Initialization and Configuration functions *********************************/
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+
+/* GPIO Read and Write functions **********************************************/
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+
+/* GPIO Alternate functions configuration functions ***************************/
+void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F30x_GPIO_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/