Diff: targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_pmc.h

Revision:

149:1fb5f62b92bd

Parent:

148:213f3ebbe634

Child:

150:49699a7d7064

--- a/targets/hal/TARGET_Freescale/TARGET_KSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_pmc.h	Thu Apr 03 11:30:06 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,577 +0,0 @@
-/*
- * Copyright (c) 2014, Freescale Semiconductor, Inc.
- * All rights reserved.
- *
- * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-/*
- * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
- *
- * This file was generated automatically and any changes may be lost.
- */
-#ifndef __HW_PMC_REGISTERS_H__
-#define __HW_PMC_REGISTERS_H__
-
-#include "regs.h"
-
-/*
- * MK64F12 PMC
- *
- * Power Management Controller
- *
- * Registers defined in this header file:
- * - HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register
- * - HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register
- * - HW_PMC_REGSC - Regulator Status And Control register
- *
- * - hw_pmc_t - Struct containing all module registers.
- */
-
-//! @name Module base addresses
-//@{
-#ifndef REGS_PMC_BASE
-#define HW_PMC_INSTANCE_COUNT (1U) //!< Number of instances of the PMC module.
-#define REGS_PMC_BASE (0x4007D000U) //!< Base address for PMC.
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register (RW)
- *
- * Reset value: 0x10U
- *
- * This register contains status and control bits to support the low voltage
- * detect function. This register should be written during the reset initialization
- * program to set the desired controls even if the desired settings are the same
- * as the reset settings. While the device is in the very low power or low
- * leakage modes, the LVD system is disabled regardless of LVDSC1 settings. To protect
- * systems that must have LVD always on, configure the Power Mode Protection
- * (PMPROT) register of the SMC module (SMC_PMPROT) to disallow any very low power or
- * low leakage modes from being enabled. See the device's data sheet for the
- * exact LVD trip voltages. The LVDV bits are reset solely on a POR Only event. The
- * register's other bits are reset on Chip Reset Not VLLS. For more information
- * about these reset types, refer to the Reset section details.
- */
-typedef union _hw_pmc_lvdsc1
-{
-    uint8_t U;
-    struct _hw_pmc_lvdsc1_bitfields
-    {
-        uint8_t LVDV : 2;              //!< [1:0] Low-Voltage Detect Voltage Select
-        uint8_t RESERVED0 : 2;         //!< [3:2]
-        uint8_t LVDRE : 1;             //!< [4] Low-Voltage Detect Reset Enable
-        uint8_t LVDIE : 1;             //!< [5] Low-Voltage Detect Interrupt Enable
-        uint8_t LVDACK : 1;            //!< [6] Low-Voltage Detect Acknowledge
-        uint8_t LVDF : 1;              //!< [7] Low-Voltage Detect Flag
-    } B;
-} hw_pmc_lvdsc1_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PMC_LVDSC1 register
- */
-//@{
-#define HW_PMC_LVDSC1_ADDR       (REGS_PMC_BASE + 0x0U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PMC_LVDSC1            (*(__IO hw_pmc_lvdsc1_t *) HW_PMC_LVDSC1_ADDR)
-#define HW_PMC_LVDSC1_RD()       (HW_PMC_LVDSC1.U)
-#define HW_PMC_LVDSC1_WR(v)      (HW_PMC_LVDSC1.U = (v))
-#define HW_PMC_LVDSC1_SET(v)     (HW_PMC_LVDSC1_WR(HW_PMC_LVDSC1_RD() |  (v)))
-#define HW_PMC_LVDSC1_CLR(v)     (HW_PMC_LVDSC1_WR(HW_PMC_LVDSC1_RD() & ~(v)))
-#define HW_PMC_LVDSC1_TOG(v)     (HW_PMC_LVDSC1_WR(HW_PMC_LVDSC1_RD() ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PMC_LVDSC1 bitfields
- */
-
-/*!
- * @name Register PMC_LVDSC1, field LVDV[1:0] (RW)
- *
- * Selects the LVD trip point voltage (V LVD ).
- *
- * Values:
- * - 00 - Low trip point selected (V LVD = V LVDL )
- * - 01 - High trip point selected (V LVD = V LVDH )
- * - 10 - Reserved
- * - 11 - Reserved
- */
-//@{
-#define BP_PMC_LVDSC1_LVDV   (0U)          //!< Bit position for PMC_LVDSC1_LVDV.
-#define BM_PMC_LVDSC1_LVDV   (0x03U)       //!< Bit mask for PMC_LVDSC1_LVDV.
-#define BS_PMC_LVDSC1_LVDV   (2U)          //!< Bit field size in bits for PMC_LVDSC1_LVDV.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC1_LVDV field.
-#define BR_PMC_LVDSC1_LVDV   (HW_PMC_LVDSC1.B.LVDV)
-#endif
-
-//! @brief Format value for bitfield PMC_LVDSC1_LVDV.
-#define BF_PMC_LVDSC1_LVDV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC1_LVDV), uint8_t) & BM_PMC_LVDSC1_LVDV)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVDV field to a new value.
-#define BW_PMC_LVDSC1_LVDV(v) (HW_PMC_LVDSC1_WR((HW_PMC_LVDSC1_RD() & ~BM_PMC_LVDSC1_LVDV) | BF_PMC_LVDSC1_LVDV(v)))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC1, field LVDRE[4] (RW)
- *
- * This write-once bit enables LVDF events to generate a hardware reset.
- * Additional writes are ignored.
- *
- * Values:
- * - 0 - LVDF does not generate hardware resets
- * - 1 - Force an MCU reset when LVDF = 1
- */
-//@{
-#define BP_PMC_LVDSC1_LVDRE  (4U)          //!< Bit position for PMC_LVDSC1_LVDRE.
-#define BM_PMC_LVDSC1_LVDRE  (0x10U)       //!< Bit mask for PMC_LVDSC1_LVDRE.
-#define BS_PMC_LVDSC1_LVDRE  (1U)          //!< Bit field size in bits for PMC_LVDSC1_LVDRE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC1_LVDRE field.
-#define BR_PMC_LVDSC1_LVDRE  (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDRE))
-#endif
-
-//! @brief Format value for bitfield PMC_LVDSC1_LVDRE.
-#define BF_PMC_LVDSC1_LVDRE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC1_LVDRE), uint8_t) & BM_PMC_LVDSC1_LVDRE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVDRE field to a new value.
-#define BW_PMC_LVDSC1_LVDRE(v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDRE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC1, field LVDIE[5] (RW)
- *
- * Enables hardware interrupt requests for LVDF.
- *
- * Values:
- * - 0 - Hardware interrupt disabled (use polling)
- * - 1 - Request a hardware interrupt when LVDF = 1
- */
-//@{
-#define BP_PMC_LVDSC1_LVDIE  (5U)          //!< Bit position for PMC_LVDSC1_LVDIE.
-#define BM_PMC_LVDSC1_LVDIE  (0x20U)       //!< Bit mask for PMC_LVDSC1_LVDIE.
-#define BS_PMC_LVDSC1_LVDIE  (1U)          //!< Bit field size in bits for PMC_LVDSC1_LVDIE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC1_LVDIE field.
-#define BR_PMC_LVDSC1_LVDIE  (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDIE))
-#endif
-
-//! @brief Format value for bitfield PMC_LVDSC1_LVDIE.
-#define BF_PMC_LVDSC1_LVDIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC1_LVDIE), uint8_t) & BM_PMC_LVDSC1_LVDIE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVDIE field to a new value.
-#define BW_PMC_LVDSC1_LVDIE(v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDIE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC1, field LVDACK[6] (WORZ)
- *
- * This write-only field is used to acknowledge low voltage detection errors.
- * Write 1 to clear LVDF. Reads always return 0.
- */
-//@{
-#define BP_PMC_LVDSC1_LVDACK (6U)          //!< Bit position for PMC_LVDSC1_LVDACK.
-#define BM_PMC_LVDSC1_LVDACK (0x40U)       //!< Bit mask for PMC_LVDSC1_LVDACK.
-#define BS_PMC_LVDSC1_LVDACK (1U)          //!< Bit field size in bits for PMC_LVDSC1_LVDACK.
-
-//! @brief Format value for bitfield PMC_LVDSC1_LVDACK.
-#define BF_PMC_LVDSC1_LVDACK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC1_LVDACK), uint8_t) & BM_PMC_LVDSC1_LVDACK)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVDACK field to a new value.
-#define BW_PMC_LVDSC1_LVDACK(v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDACK) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC1, field LVDF[7] (RO)
- *
- * This read-only status field indicates a low-voltage detect event.
- *
- * Values:
- * - 0 - Low-voltage event not detected
- * - 1 - Low-voltage event detected
- */
-//@{
-#define BP_PMC_LVDSC1_LVDF   (7U)          //!< Bit position for PMC_LVDSC1_LVDF.
-#define BM_PMC_LVDSC1_LVDF   (0x80U)       //!< Bit mask for PMC_LVDSC1_LVDF.
-#define BS_PMC_LVDSC1_LVDF   (1U)          //!< Bit field size in bits for PMC_LVDSC1_LVDF.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC1_LVDF field.
-#define BR_PMC_LVDSC1_LVDF   (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR, BP_PMC_LVDSC1_LVDF))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register (RW)
- *
- * Reset value: 0x00U
- *
- * This register contains status and control bits to support the low voltage
- * warning function. While the device is in the very low power or low leakage modes,
- * the LVD system is disabled regardless of LVDSC2 settings. See the device's
- * data sheet for the exact LVD trip voltages. The LVW trip voltages depend on LVWV
- * and LVDV. LVWV is reset solely on a POR Only event. The other fields of the
- * register are reset on Chip Reset Not VLLS. For more information about these
- * reset types, refer to the Reset section details.
- */
-typedef union _hw_pmc_lvdsc2
-{
-    uint8_t U;
-    struct _hw_pmc_lvdsc2_bitfields
-    {
-        uint8_t LVWV : 2;              //!< [1:0] Low-Voltage Warning Voltage Select
-        uint8_t RESERVED0 : 3;         //!< [4:2]
-        uint8_t LVWIE : 1;             //!< [5] Low-Voltage Warning Interrupt Enable
-        uint8_t LVWACK : 1;            //!< [6] Low-Voltage Warning Acknowledge
-        uint8_t LVWF : 1;              //!< [7] Low-Voltage Warning Flag
-    } B;
-} hw_pmc_lvdsc2_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PMC_LVDSC2 register
- */
-//@{
-#define HW_PMC_LVDSC2_ADDR       (REGS_PMC_BASE + 0x1U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PMC_LVDSC2            (*(__IO hw_pmc_lvdsc2_t *) HW_PMC_LVDSC2_ADDR)
-#define HW_PMC_LVDSC2_RD()       (HW_PMC_LVDSC2.U)
-#define HW_PMC_LVDSC2_WR(v)      (HW_PMC_LVDSC2.U = (v))
-#define HW_PMC_LVDSC2_SET(v)     (HW_PMC_LVDSC2_WR(HW_PMC_LVDSC2_RD() |  (v)))
-#define HW_PMC_LVDSC2_CLR(v)     (HW_PMC_LVDSC2_WR(HW_PMC_LVDSC2_RD() & ~(v)))
-#define HW_PMC_LVDSC2_TOG(v)     (HW_PMC_LVDSC2_WR(HW_PMC_LVDSC2_RD() ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PMC_LVDSC2 bitfields
- */
-
-/*!
- * @name Register PMC_LVDSC2, field LVWV[1:0] (RW)
- *
- * Selects the LVW trip point voltage (VLVW). The actual voltage for the warning
- * depends on LVDSC1[LVDV].
- *
- * Values:
- * - 00 - Low trip point selected (VLVW = VLVW1)
- * - 01 - Mid 1 trip point selected (VLVW = VLVW2)
- * - 10 - Mid 2 trip point selected (VLVW = VLVW3)
- * - 11 - High trip point selected (VLVW = VLVW4)
- */
-//@{
-#define BP_PMC_LVDSC2_LVWV   (0U)          //!< Bit position for PMC_LVDSC2_LVWV.
-#define BM_PMC_LVDSC2_LVWV   (0x03U)       //!< Bit mask for PMC_LVDSC2_LVWV.
-#define BS_PMC_LVDSC2_LVWV   (2U)          //!< Bit field size in bits for PMC_LVDSC2_LVWV.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC2_LVWV field.
-#define BR_PMC_LVDSC2_LVWV   (HW_PMC_LVDSC2.B.LVWV)
-#endif
-
-//! @brief Format value for bitfield PMC_LVDSC2_LVWV.
-#define BF_PMC_LVDSC2_LVWV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC2_LVWV), uint8_t) & BM_PMC_LVDSC2_LVWV)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVWV field to a new value.
-#define BW_PMC_LVDSC2_LVWV(v) (HW_PMC_LVDSC2_WR((HW_PMC_LVDSC2_RD() & ~BM_PMC_LVDSC2_LVWV) | BF_PMC_LVDSC2_LVWV(v)))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC2, field LVWIE[5] (RW)
- *
- * Enables hardware interrupt requests for LVWF.
- *
- * Values:
- * - 0 - Hardware interrupt disabled (use polling)
- * - 1 - Request a hardware interrupt when LVWF = 1
- */
-//@{
-#define BP_PMC_LVDSC2_LVWIE  (5U)          //!< Bit position for PMC_LVDSC2_LVWIE.
-#define BM_PMC_LVDSC2_LVWIE  (0x20U)       //!< Bit mask for PMC_LVDSC2_LVWIE.
-#define BS_PMC_LVDSC2_LVWIE  (1U)          //!< Bit field size in bits for PMC_LVDSC2_LVWIE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC2_LVWIE field.
-#define BR_PMC_LVDSC2_LVWIE  (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR, BP_PMC_LVDSC2_LVWIE))
-#endif
-
-//! @brief Format value for bitfield PMC_LVDSC2_LVWIE.
-#define BF_PMC_LVDSC2_LVWIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC2_LVWIE), uint8_t) & BM_PMC_LVDSC2_LVWIE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVWIE field to a new value.
-#define BW_PMC_LVDSC2_LVWIE(v) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR, BP_PMC_LVDSC2_LVWIE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC2, field LVWACK[6] (WORZ)
- *
- * This write-only field is used to acknowledge low voltage warning errors.
- * Write 1 to clear LVWF. Reads always return 0.
- */
-//@{
-#define BP_PMC_LVDSC2_LVWACK (6U)          //!< Bit position for PMC_LVDSC2_LVWACK.
-#define BM_PMC_LVDSC2_LVWACK (0x40U)       //!< Bit mask for PMC_LVDSC2_LVWACK.
-#define BS_PMC_LVDSC2_LVWACK (1U)          //!< Bit field size in bits for PMC_LVDSC2_LVWACK.
-
-//! @brief Format value for bitfield PMC_LVDSC2_LVWACK.
-#define BF_PMC_LVDSC2_LVWACK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_LVDSC2_LVWACK), uint8_t) & BM_PMC_LVDSC2_LVWACK)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LVWACK field to a new value.
-#define BW_PMC_LVDSC2_LVWACK(v) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR, BP_PMC_LVDSC2_LVWACK) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_LVDSC2, field LVWF[7] (RO)
- *
- * This read-only status field indicates a low-voltage warning event. LVWF is
- * set when VSupply transitions below the trip point, or after reset and VSupply is
- * already below VLVW. LVWF may be 1 after power-on reset, therefore, to use LVW
- * interrupt function, before enabling LVWIE, LVWF must be cleared by writing
- * LVWACK first.
- *
- * Values:
- * - 0 - Low-voltage warning event not detected
- * - 1 - Low-voltage warning event detected
- */
-//@{
-#define BP_PMC_LVDSC2_LVWF   (7U)          //!< Bit position for PMC_LVDSC2_LVWF.
-#define BM_PMC_LVDSC2_LVWF   (0x80U)       //!< Bit mask for PMC_LVDSC2_LVWF.
-#define BS_PMC_LVDSC2_LVWF   (1U)          //!< Bit field size in bits for PMC_LVDSC2_LVWF.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_LVDSC2_LVWF field.
-#define BR_PMC_LVDSC2_LVWF   (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR, BP_PMC_LVDSC2_LVWF))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PMC_REGSC - Regulator Status And Control register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PMC_REGSC - Regulator Status And Control register (RW)
- *
- * Reset value: 0x04U
- *
- * The PMC contains an internal voltage regulator. The voltage regulator design
- * uses a bandgap reference that is also available through a buffer as input to
- * certain internal peripherals, such as the CMP and ADC. The internal regulator
- * provides a status bit (REGONS) indicating the regulator is in run regulation.
- * This register is reset on Chip Reset Not VLLS and by reset types that trigger
- * Chip Reset not VLLS. See the Reset section details for more information.
- */
-typedef union _hw_pmc_regsc
-{
-    uint8_t U;
-    struct _hw_pmc_regsc_bitfields
-    {
-        uint8_t BGBE : 1;              //!< [0] Bandgap Buffer Enable
-        uint8_t RESERVED0 : 1;         //!< [1]
-        uint8_t REGONS : 1;            //!< [2] Regulator In Run Regulation Status
-        uint8_t ACKISO : 1;            //!< [3] Acknowledge Isolation
-        uint8_t BGEN : 1;              //!< [4] Bandgap Enable In VLPx Operation
-        uint8_t RESERVED1 : 3;         //!< [7:5]
-    } B;
-} hw_pmc_regsc_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PMC_REGSC register
- */
-//@{
-#define HW_PMC_REGSC_ADDR        (REGS_PMC_BASE + 0x2U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PMC_REGSC             (*(__IO hw_pmc_regsc_t *) HW_PMC_REGSC_ADDR)
-#define HW_PMC_REGSC_RD()        (HW_PMC_REGSC.U)
-#define HW_PMC_REGSC_WR(v)       (HW_PMC_REGSC.U = (v))
-#define HW_PMC_REGSC_SET(v)      (HW_PMC_REGSC_WR(HW_PMC_REGSC_RD() |  (v)))
-#define HW_PMC_REGSC_CLR(v)      (HW_PMC_REGSC_WR(HW_PMC_REGSC_RD() & ~(v)))
-#define HW_PMC_REGSC_TOG(v)      (HW_PMC_REGSC_WR(HW_PMC_REGSC_RD() ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PMC_REGSC bitfields
- */
-
-/*!
- * @name Register PMC_REGSC, field BGBE[0] (RW)
- *
- * Enables the bandgap buffer.
- *
- * Values:
- * - 0 - Bandgap buffer not enabled
- * - 1 - Bandgap buffer enabled
- */
-//@{
-#define BP_PMC_REGSC_BGBE    (0U)          //!< Bit position for PMC_REGSC_BGBE.
-#define BM_PMC_REGSC_BGBE    (0x01U)       //!< Bit mask for PMC_REGSC_BGBE.
-#define BS_PMC_REGSC_BGBE    (1U)          //!< Bit field size in bits for PMC_REGSC_BGBE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_REGSC_BGBE field.
-#define BR_PMC_REGSC_BGBE    (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_BGBE))
-#endif
-
-//! @brief Format value for bitfield PMC_REGSC_BGBE.
-#define BF_PMC_REGSC_BGBE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_REGSC_BGBE), uint8_t) & BM_PMC_REGSC_BGBE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the BGBE field to a new value.
-#define BW_PMC_REGSC_BGBE(v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_BGBE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_REGSC, field REGONS[2] (RO)
- *
- * This read-only field provides the current status of the internal voltage
- * regulator.
- *
- * Values:
- * - 0 - Regulator is in stop regulation or in transition to/from it
- * - 1 - Regulator is in run regulation
- */
-//@{
-#define BP_PMC_REGSC_REGONS  (2U)          //!< Bit position for PMC_REGSC_REGONS.
-#define BM_PMC_REGSC_REGONS  (0x04U)       //!< Bit mask for PMC_REGSC_REGONS.
-#define BS_PMC_REGSC_REGONS  (1U)          //!< Bit field size in bits for PMC_REGSC_REGONS.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_REGSC_REGONS field.
-#define BR_PMC_REGSC_REGONS  (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_REGONS))
-#endif
-//@}
-
-/*!
- * @name Register PMC_REGSC, field ACKISO[3] (W1C)
- *
- * Reading this field indicates whether certain peripherals and the I/O pads are
- * in a latched state as a result of having been in a VLLS mode. Writing 1 to
- * this field when it is set releases the I/O pads and certain peripherals to their
- * normal run mode state. After recovering from a VLLS mode, user should restore
- * chip configuration before clearing ACKISO. In particular, pin configuration
- * for enabled LLWU wakeup pins should be restored to avoid any LLWU flag from
- * being falsely set when ACKISO is cleared.
- *
- * Values:
- * - 0 - Peripherals and I/O pads are in normal run state.
- * - 1 - Certain peripherals and I/O pads are in an isolated and latched state.
- */
-//@{
-#define BP_PMC_REGSC_ACKISO  (3U)          //!< Bit position for PMC_REGSC_ACKISO.
-#define BM_PMC_REGSC_ACKISO  (0x08U)       //!< Bit mask for PMC_REGSC_ACKISO.
-#define BS_PMC_REGSC_ACKISO  (1U)          //!< Bit field size in bits for PMC_REGSC_ACKISO.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_REGSC_ACKISO field.
-#define BR_PMC_REGSC_ACKISO  (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_ACKISO))
-#endif
-
-//! @brief Format value for bitfield PMC_REGSC_ACKISO.
-#define BF_PMC_REGSC_ACKISO(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_REGSC_ACKISO), uint8_t) & BM_PMC_REGSC_ACKISO)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the ACKISO field to a new value.
-#define BW_PMC_REGSC_ACKISO(v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_ACKISO) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PMC_REGSC, field BGEN[4] (RW)
- *
- * BGEN controls whether the bandgap is enabled in lower power modes of
- * operation (VLPx, LLS, and VLLSx). When on-chip peripherals require the bandgap voltage
- * reference in low power modes of operation, set BGEN to continue to enable the
- * bandgap operation. When the bandgap voltage reference is not needed in low
- * power modes, clear BGEN to avoid excess power consumption.
- *
- * Values:
- * - 0 - Bandgap voltage reference is disabled in VLPx , LLS , and VLLSx modes.
- * - 1 - Bandgap voltage reference is enabled in VLPx , LLS , and VLLSx modes.
- */
-//@{
-#define BP_PMC_REGSC_BGEN    (4U)          //!< Bit position for PMC_REGSC_BGEN.
-#define BM_PMC_REGSC_BGEN    (0x10U)       //!< Bit mask for PMC_REGSC_BGEN.
-#define BS_PMC_REGSC_BGEN    (1U)          //!< Bit field size in bits for PMC_REGSC_BGEN.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PMC_REGSC_BGEN field.
-#define BR_PMC_REGSC_BGEN    (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_BGEN))
-#endif
-
-//! @brief Format value for bitfield PMC_REGSC_BGEN.
-#define BF_PMC_REGSC_BGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_PMC_REGSC_BGEN), uint8_t) & BM_PMC_REGSC_BGEN)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the BGEN field to a new value.
-#define BW_PMC_REGSC_BGEN(v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR, BP_PMC_REGSC_BGEN) = (v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// hw_pmc_t - module struct
-//-------------------------------------------------------------------------------------------
-/*!
- * @brief All PMC module registers.
- */
-#ifndef __LANGUAGE_ASM__
-#pragma pack(1)
-typedef struct _hw_pmc
-{
-    __IO hw_pmc_lvdsc1_t LVDSC1;           //!< [0x0] Low Voltage Detect Status And Control 1 register
-    __IO hw_pmc_lvdsc2_t LVDSC2;           //!< [0x1] Low Voltage Detect Status And Control 2 register
-    __IO hw_pmc_regsc_t REGSC;             //!< [0x2] Regulator Status And Control register
-} hw_pmc_t;
-#pragma pack()
-
-//! @brief Macro to access all PMC registers.
-//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
-//!     use the '&' operator, like <code>&HW_PMC</code>.
-#define HW_PMC         (*(hw_pmc_t *) REGS_PMC_BASE)
-#endif
-
-#endif // __HW_PMC_REGISTERS_H__
-// v22/130726/0.9
-// EOF