Diff: targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x_exti.h

Revision:

619:034e698bc035

Parent:

618:484341a108bc

Child:

620:49241b7c6da5

--- a/targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x_exti.h	Fri Sep 04 08:45:09 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,86 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    
-  * @author  
-  * @version 
-  * @date    
-  * @brief   This file contains all the functions prototypes for the GPIO
-  *          firmware library.
-  ******************************************************************************
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __W7500X_EXTI_H
-#define __W7500X_EXTI_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
- /* Includes ------------------------------------------------------------------*/
-#include "W7500x.h"
-
-
- /**
-  * @brief  EXTI mode enumeration  
-  */
-
-typedef enum
-{
-  EXTI_Mode_Disable = 0x00,
-  EXTI_Mode_Interrupt = 0x02
-}EXTIMode_TypeDef;
-
-#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Rising) || \
-                            ((MODE) == EXTI_Mode_Interrupt)) 
-
-/** 
-  * @brief  EXTI Trigger enumeration  
-  */
-
-typedef enum
-{
-  EXTI_Trigger_Rising = 0x00,
-  EXTI_Trigger_Falling = 0x01  
-}EXTITrigger_TypeDef;
-
-#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
-                                  ((TRIGGER) == EXTI_Trigger_Falling))
-
-/** 
-  * @brief  EXTI Init Structure definition  
-  */
-
-typedef struct
-{
-  uint32_t EXTI_Line;               /*!< Specifies the EXTI lines to be enabled or disabled.
-                                         This parameter can be any combination of @ref EXTI_Lines */
-   
-  EXTIMode_TypeDef EXTI_Mode;       /*!< Specifies the mode for the EXTI lines.This parameter can be a value of @ref EXTIMode_TypeDef */
-
-  EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
-                                         This parameter can be a value of @ref EXTIMode_TypeDef */
-
-}EXTI_InitTypeDef;
-
-/**
-  * @}
-  */
-
-void EXTI_DeInit(void);
-void EXTI_Init(PAD_Type Px, EXTI_InitTypeDef* EXTI_InitStruct);
-void EXTI_Polarity_Set(PAD_Type Px, uint16_t GPIO_Pin, uint16_t Polarity );
-void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
-uint32_t EXTI_GetEXTIConfig(PAD_Type Px, uint16_t GPIO_Pin);
-uint16_t EXTI_Px_GetEXTEN(PAD_Type Px);
-uint16_t EXTI_Px_GetEXTINTPOL(PAD_Type Px);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif //__W7500X_EXTI_H