Diff: USBHost/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/host/usb0_host_drv_api.c

Revision:

39:d96aa62afc5b

Parent:

38:d66f404b66d4

Child:

40:7c3b59bb364e

--- a/USBHost/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/host/usb0_host_drv_api.c	Thu Jul 20 12:21:36 2017 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,889 +0,0 @@
-/*******************************************************************************
-* DISCLAIMER
-* This software is supplied by Renesas Electronics Corporation and is only
-* intended for use with Renesas products. No other uses are authorized. This
-* software is owned by Renesas Electronics Corporation and is protected under
-* all applicable laws, including copyright laws.
-* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
-* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
-* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
-* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
-* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
-* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
-* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
-* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
-* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-* Renesas reserves the right, without notice, to make changes to this software
-* and to discontinue the availability of this software. By using this software,
-* you agree to the additional terms and conditions found by accessing the
-* following link:
-* http://www.renesas.com/disclaimer
-* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
-*******************************************************************************/
-/*******************************************************************************
-* File Name    : usb0_host_drv_api.c
-* $Rev: 1116 $
-* $Date:: 2014-07-09 16:29:19 +0900#$
-* Device(s)    : RZ/A1H
-* Tool-Chain   :
-* OS           : None
-* H/W Platform :
-* Description  : RZ/A1H R7S72100 USB Sample Program
-* Operation    :
-* Limitations  :
-*******************************************************************************/
-
-
-/*******************************************************************************
-Includes   <System Includes> , "Project Includes"
-*******************************************************************************/
-#include "usb0_host.h"
-#include "dev_drv.h"
-
-
-/*******************************************************************************
-Typedef definitions
-*******************************************************************************/
-
-
-/*******************************************************************************
-Macro definitions
-*******************************************************************************/
-
-
-/*******************************************************************************
-Imported global variables and functions (from other files)
-*******************************************************************************/
-
-
-/*******************************************************************************
-Exported global variables and functions (to be accessed by other files)
-*******************************************************************************/
-static void usb0_host_resetEP(USB_HOST_CFG_PIPETBL_t *tbl);
-
-
-/*******************************************************************************
-Private global variables and functions
-*******************************************************************************/
-
-
-/*******************************************************************************
-* Function Name: usb0_api_host_init
-* Description  : Initializes USB module in the USB host mode.
-*              : USB connection is executed when executing this function in
-*              : the states that USB device isconnected to the USB port.
-* Arguments    : uint8_t int_level  : USB Module interrupt level
-*              : USBU16  mode       : USB_HOST_HIGH_SPEED
-*                                   : USB_HOST_FULL_SPEED
-*              : uint16_t clockmode : USB Clock mode
-* Return Value : USB detach or attach
-*              :  USB_HOST_ATTACH
-*              :  USB_HOST_DETACH
-*******************************************************************************/
-uint16_t usb0_api_host_init (uint8_t int_level, uint16_t mode, uint16_t clockmode)
-{
-    uint16_t         connect;
-    volatile uint8_t dummy_buf;
-
-    CPG.STBCR7 &= 0xfd;                         /*The clock of USB0 modules is permitted */
-    dummy_buf   = CPG.STBCR7;                   /* (Dummy read) */
-
-    g_usb0_host_SupportUsbDeviceSpeed = mode;
-
-    usb0_host_setting_interrupt(int_level);
-    usb0_host_reset_module(clockmode);
-
-    g_usb0_host_bchg_flag   = USB_HOST_NO;
-    g_usb0_host_detach_flag = USB_HOST_NO;
-    g_usb0_host_attach_flag = USB_HOST_NO;
-
-    g_usb0_host_driver_state = USB_HOST_DRV_DETACHED;
-    g_usb0_host_default_max_packet[USB_HOST_DEVICE_0] = 64;
-
-    usb0_host_InitModule();
-
-    connect = usb0_host_CheckAttach();
-
-    if (connect == USB_HOST_ATTACH)
-    {
-        g_usb0_host_attach_flag = USB_HOST_YES;
-    }
-    else
-    {
-        usb0_host_UsbDetach2();
-    }
-
-    return connect;
-}
-
-#if(1) /* ohci_wrapp */
-#else
-/*******************************************************************************
-* Function Name: usb0_api_host_enumeration
-* Description  : Initializes USB module in the USB host mode.
-*              : USB connection is executed when executing this function in
-*              : the states that USB device isconnected to the USB port.
-* Arguments    : uint16_t devadr : device address
-* Return Value : DEVDRV_USBH_DETACH_ERR       : device detach
-*              : DEVDRV_SUCCESS               : device enumeration success
-*              : DEVDRV_ERROR                 : device enumeration error
-*******************************************************************************/
-int32_t usb0_api_host_enumeration (uint16_t devadr)
-{
-    int32_t  ret;
-    uint16_t driver_sts;
-
-    g_usb0_host_setUsbAddress = devadr;
-
-    while (1)
-    {
-        driver_sts = usb0_api_host_GetUsbDeviceState();
-
-        if (driver_sts == USB_HOST_DRV_DETACHED)
-        {
-            ret = DEVDRV_USBH_DETACH_ERR;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_CONFIGURED)
-        {
-            ret = DEVDRV_SUCCESS;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_STALL)
-        {
-            ret = DEVDRV_ERROR;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_NORES)
-        {
-            ret = DEVDRV_ERROR;
-            break;
-        }
-        else
-        {
-            /* Do Nothing */
-        }
-    }
-
-    if (driver_sts == USB_HOST_DRV_NORES)
-    {
-        while (1)
-        {
-            driver_sts = usb0_api_host_GetUsbDeviceState();
-
-            if (driver_sts == USB_HOST_DRV_DETACHED)
-            {
-                break;
-            }
-        }
-    }
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_detach
-* Description  : USB detach routine
-* Arguments    : none
-* Return Value : USB_HOST_DETACH : USB detach
-*              : USB_HOST_ATTACH : USB attach
-*              : DEVDRV_ERROR    : error
-*******************************************************************************/
-int32_t usb0_api_host_detach (void)
-{
-    int32_t  ret;
-    uint16_t driver_sts;
-
-    while (1)
-    {
-        driver_sts = usb0_api_host_GetUsbDeviceState();
-
-        if (driver_sts == USB_HOST_DRV_DETACHED)
-        {
-            ret = USB_HOST_DETACH;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_CONFIGURED)
-        {
-            ret = USB_HOST_ATTACH;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_STALL)
-        {
-            ret = DEVDRV_ERROR;
-            break;
-        }
-        else if (driver_sts == USB_HOST_DRV_NORES)
-        {
-            ret = DEVDRV_ERROR;
-            break;
-        }
-        else
-        {
-            /* Do Nothing */
-        }
-    }
-
-    if (driver_sts == USB_HOST_DRV_NORES)
-    {
-        while (1)
-        {
-            driver_sts = usb0_api_host_GetUsbDeviceState();
-
-            if (driver_sts == USB_HOST_DRV_DETACHED)
-            {
-                break;
-            }
-        }
-    }
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_data_in
-* Description  : Executes USB transfer as data-in in the argument specified pipe.
-* Arguments    : uint16_t devadr       ; device address
-*              : uint16_t Pipe         ; Pipe Number
-*              : uint32_t Size         ; Data Size
-*              : uint8_t  *data_buf    ; Data data_buf Address
-* Return Value : DEVDRV_SUCCESS       ; success
-*              : DEVDRV_ERROR         ; error
-*******************************************************************************/
-int32_t usb0_api_host_data_in (uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t * data_buf)
-{
-    int32_t ret;
-
-    if (Pipe == USB_HOST_PIPE0)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (RZA_IO_RegRead_16(&g_usb0_host_pipemaxp[Pipe], USB_PIPEMAXP_DEVSEL_SHIFT, USB_PIPEMAXP_DEVSEL) != devadr)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[Pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 1)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (g_usb0_host_pipe_status[Pipe] == USB_HOST_PIPE_IDLE)
-    {
-        usb0_host_start_receive_transfer(Pipe, Size, data_buf);
-    }
-    else
-    {
-        return DEVDRV_ERROR;              /* Now pipe is busy */
-    }
-
-    /* waiting for completing routine           */
-    do
-    {
-        if (g_usb0_host_detach_flag == USB_HOST_YES)
-        {
-            break;
-        }
-
-        if ((g_usb0_host_pipe_status[Pipe] != USB_HOST_PIPE_IDLE) && (g_usb0_host_pipe_status[Pipe] != USB_HOST_PIPE_WAIT))
-        {
-            break;
-        }
-
-    } while (1);
-
-    if (g_usb0_host_detach_flag == USB_HOST_YES)
-    {
-        return DEVDRV_USBH_DETACH_ERR;
-    }
-
-    switch (g_usb0_host_pipe_status[Pipe])
-    {
-        case USB_HOST_PIPE_DONE:
-            ret = DEVDRV_SUCCESS;
-        break;
-
-        case USB_HOST_PIPE_STALL:
-            ret = DEVDRV_USBH_STALL;
-        break;
-
-        case USB_HOST_PIPE_NORES:
-            ret = DEVDRV_USBH_COM_ERR;
-        break;
-
-        default:
-            ret = DEVDRV_ERROR;
-        break;
-    }
-
-    usb0_host_stop_transfer(Pipe);
-
-    g_usb0_host_pipe_status[Pipe] = USB_HOST_PIPE_IDLE;
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_data_out
-* Description  : Executes USB transfer as data-out in the argument specified pipe.
-* Arguments    : uint16_t devadr       ; device address
-*              : uint16_t Pipe         ; Pipe Number
-*              : uint32_t Size         ; Data Size
-*              : uint8_t  *data_buf    ; Data data_buf Address
-* Return Value : DEVDRV_SUCCESS       ; success
-*              : DEVDRV_ERROR         ; error
-*******************************************************************************/
-int32_t usb0_api_host_data_out (uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t * data_buf)
-{
-    int32_t ret;
-
-    if (Pipe == USB_HOST_PIPE0)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (RZA_IO_RegRead_16(&g_usb0_host_pipemaxp[Pipe], USB_PIPEMAXP_DEVSEL_SHIFT, USB_PIPEMAXP_DEVSEL) != devadr)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[Pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 0)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    if (g_usb0_host_pipe_status[Pipe] == USB_HOST_PIPE_IDLE)
-    {
-        usb0_host_start_send_transfer(Pipe, Size, data_buf);
-    }
-    else
-    {
-        return DEVDRV_ERROR;              /* Now pipe is busy */
-    }
-
-    /* waiting for completing routine           */
-    do
-    {
-        if (g_usb0_host_detach_flag == USB_HOST_YES)
-        {
-            break;
-        }
-
-        if ((g_usb0_host_pipe_status[Pipe] != USB_HOST_PIPE_IDLE) && (g_usb0_host_pipe_status[Pipe] != USB_HOST_PIPE_WAIT))
-        {
-            break;
-        }
-
-    } while (1);
-
-    if (g_usb0_host_detach_flag == USB_HOST_YES)
-    {
-        return DEVDRV_USBH_DETACH_ERR;
-    }
-
-    switch (g_usb0_host_pipe_status[Pipe])
-    {
-        case USB_HOST_PIPE_DONE:
-            ret = DEVDRV_SUCCESS;
-        break;
-
-        case USB_HOST_PIPE_STALL:
-            ret = DEVDRV_USBH_STALL;
-        break;
-
-        case USB_HOST_PIPE_NORES:
-            ret = DEVDRV_USBH_COM_ERR;
-        break;
-
-        default:
-            ret = DEVDRV_ERROR;
-        break;
-    }
-
-    usb0_host_stop_transfer(Pipe);
-
-    g_usb0_host_pipe_status[Pipe] = USB_HOST_PIPE_IDLE;
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_control_transfer
-* Description  : Executes USB control transfer.
-* Arguments    : uint16_t devadr       ; device address
-*              : uint16_t Req          ; bmRequestType & bRequest
-*              : uint16_t Val          ; wValue
-*              : uint16_t Indx         ; wIndex
-*              : uint16_t Len          ; wLength
-*              : uint8_t  *buf         ; Buffer
-* Return Value : DEVDRV_SUCCESS           ; success
-*              : DEVDRV_USBH_DETACH_ERR   ; device detach
-*              : DEVDRV_USBH_CTRL_COM_ERR ; device no response
-*              : DEVDRV_USBH_STALL        ; STALL
-*              : DEVDRV_ERROR             ; error
-*******************************************************************************/
-int32_t usb0_api_host_control_transfer (uint16_t devadr, uint16_t Req, uint16_t Val, uint16_t Indx,
-                                                     uint16_t Len, uint8_t * Buf)
-{
-    int32_t  ret;
-
-    do
-    {
-        ret = usb0_host_CtrlTransStart(devadr, Req, Val, Indx, Len, Buf);
-
-        if (ret == DEVDRV_SUCCESS)
-        {
-            if (g_usb0_host_detach_flag == USB_HOST_YES)
-            {
-                break;
-            }
-
-            if ((g_usb0_host_pipe_status[USB_HOST_PIPE0] != USB_HOST_PIPE_IDLE)
-                && (g_usb0_host_pipe_status[USB_HOST_PIPE0] != USB_HOST_PIPE_WAIT))
-            {
-                break;
-            }
-        }
-        else
-        {
-            return DEVDRV_ERROR;
-        }
-    } while (1);
-
-    if (g_usb0_host_detach_flag == USB_HOST_YES)
-    {
-        return DEVDRV_USBH_DETACH_ERR;
-    }
-
-    switch (g_usb0_host_pipe_status[USB_HOST_PIPE0])
-    {
-        case USB_HOST_PIPE_DONE:
-            ret = DEVDRV_SUCCESS;
-        break;
-
-        case USB_HOST_PIPE_STALL:
-            ret = DEVDRV_USBH_STALL;
-        break;
-
-        case USB_HOST_PIPE_NORES:
-            ret = DEVDRV_USBH_CTRL_COM_ERR;
-        break;
-
-        default:
-            ret = DEVDRV_ERROR;
-        break;
-    }
-
-    g_usb0_host_pipe_status[USB_HOST_PIPE0] = USB_HOST_PIPE_IDLE;
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_set_endpoint
-* Description  : Sets end point on the information specified in the argument.
-* Arguments    : uint16_t                devadr           ; device address
-*              : uint8_t                *configdescriptor ; device configration descriptor
-*              : USB_HOST_CFG_PIPETBL_t *user_table       ; pipe table
-* Return Value : DEVDRV_SUCCESS       ; success
-*              : DEVDRV_ERROR         ; error
-*******************************************************************************/
-int32_t usb0_api_host_set_endpoint (uint16_t devadr, USB_HOST_CFG_PIPETBL_t * user_table, uint8_t * configdescriptor)
-{
-    uint16_t                ret;
-    uint32_t                end_point;
-    uint32_t                offset;
-    uint32_t                totalLength;
-    USB_HOST_CFG_PIPETBL_t * pipe_table;
-
-    /*  End Point Search */
-    end_point   = 0;
-    offset      = configdescriptor[0];
-    totalLength = (uint16_t)(configdescriptor[2] + ((uint16_t)configdescriptor[3] << 8));
-
-    do
-    {
-        if (configdescriptor[offset + 1] == USB_HOST_ENDPOINT_DESC)
-        {
-            pipe_table = &user_table[end_point];
-
-            if (pipe_table->pipe_number == 0xffff)
-            {
-                break;
-            }
-
-            ret = usb0_api_host_SetEndpointTable(devadr, pipe_table, (uint8_t *)&configdescriptor[offset]);
-
-            if ((ret != USB_HOST_PIPE_IN) && (ret != USB_HOST_PIPE_OUT))
-            {
-                return DEVDRV_ERROR;
-            }
-
-            ++end_point;
-        }
-
-        /* Next End Point Search */
-        offset += configdescriptor[offset];
-
-    } while (offset < totalLength);
-
-    return DEVDRV_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_clear_endpoint
-* Description  : Clears the pipe definition table specified in the argument.
-* Arguments    : USB_HOST_CFG_PIPETBL_t *user_table : pipe table
-* Return Value : DEVDRV_SUCCESS       ; success
-*              : DEVDRV_ERROR         ; error
-*******************************************************************************/
-int32_t usb0_api_host_clear_endpoint (USB_HOST_CFG_PIPETBL_t * user_table)
-{
-    uint16_t pipe;
-
-    for (pipe = USB_HOST_PIPE0; pipe <= USB_HOST_MAX_PIPE_NO; ++pipe)
-    {
-        if (user_table->pipe_number == 0xffff)
-        {
-            break;
-        }
-        user_table->pipe_cfg         &= (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD);
-        user_table->pipe_max_pktsize  = 0;
-        user_table->pipe_cycle        = 0;
-
-        user_table++;
-    }
-
-    return DEVDRV_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name: usb0_api_host_clear_endpoint_pipe
-* Description  : Clears the pipe definition table specified in the argument.
-* Arguments    : uint16_t pipe_sel                  : Pipe Number
-*              : USB_HOST_CFG_PIPETBL_t *user_table : pipe table
-* Return Value : DEVDRV_SUCCESS       ; success
-*              : DEVDRV_ERROR         ; error
-*******************************************************************************/
-int32_t usb0_api_host_clear_endpoint_pipe (uint16_t pipe_sel, USB_HOST_CFG_PIPETBL_t * user_table)
-{
-    uint16_t pipe;
-
-    for (pipe = USB_HOST_PIPE0; pipe <= USB_HOST_MAX_PIPE_NO; ++pipe)
-    {
-        if (user_table->pipe_number == 0xffff)
-        {
-            break;
-        }
-
-        if (user_table->pipe_number == pipe_sel)
-        {
-            user_table->pipe_cfg         &= (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD);
-            user_table->pipe_max_pktsize  = 0;
-            user_table->pipe_cycle        = 0;
-            break;
-        }
-
-        user_table++;
-    }
-
-    return DEVDRV_SUCCESS;
-}
-#endif
-
-/*******************************************************************************
-* Function Name: usb0_api_host_SetEndpointTable
-* Description  : Sets the end point on the information specified by the argument.
-* Arguments    : uint16_t devadr                    : device address
-*              : USB_HOST_CFG_PIPETBL_t *user_table : pipe table
-*              : uint8_t                *Table      : Endpoint descriptor
-* Return Value : USB_HOST_DIR_H_IN           ; IN endpoint
-*              : USB_HOST_DIR_H_OUT          ; OUT endpoint
-*              : USB_END_POINT_ERROR         ; error
-*******************************************************************************/
-uint16_t usb0_api_host_SetEndpointTable (uint16_t devadr, USB_HOST_CFG_PIPETBL_t * user_table, uint8_t * Table)
-{
-    uint16_t PipeCfg;
-    uint16_t PipeMaxp;
-    uint16_t pipe_number;
-    uint16_t ret;
-    uint16_t ret_flag = 0;                                          // avoid warning.
-
-    pipe_number = user_table->pipe_number;
-
-    if (Table[1] != USB_HOST_ENDPOINT_DESC)
-    {
-        return USB_END_POINT_ERROR;
-    }
-
-    switch (Table[3] & USB_HOST_EP_TYPE)
-    {
-        case USB_HOST_EP_CNTRL:
-            ret_flag =  USB_END_POINT_ERROR;
-        break;
-
-        case USB_HOST_EP_ISO:
-            if ((pipe_number != USB_HOST_PIPE1) && (pipe_number != USB_HOST_PIPE2))
-            {
-                return USB_END_POINT_ERROR;
-            }
-
-            PipeCfg = USB_HOST_ISO;
-        break;
-
-        case USB_HOST_EP_BULK:
-            if ((pipe_number < USB_HOST_PIPE1) || (pipe_number > USB_HOST_PIPE5))
-            {
-                return USB_END_POINT_ERROR;
-            }
-
-            PipeCfg = USB_HOST_BULK;
-        break;
-
-        case USB_HOST_EP_INT:
-            if ((pipe_number < USB_HOST_PIPE6) || (pipe_number > USB_HOST_PIPE9))
-            {
-                return USB_END_POINT_ERROR;
-            }
-
-            PipeCfg = USB_HOST_INTERRUPT;
-        break;
-
-        default:
-            ret_flag = USB_END_POINT_ERROR;
-        break;
-    }
-
-    if (ret_flag == USB_END_POINT_ERROR)
-    {
-        return ret_flag;
-    }
-
-    /* Set pipe configuration table */
-    if ((Table[2] & USB_HOST_EP_DIR_MASK) == USB_HOST_EP_IN)        /* IN(receive) */
-    {
-        if (PipeCfg == USB_HOST_ISO)
-        {
-            /* Transfer Type is ISO*/
-            PipeCfg |= USB_HOST_DIR_H_IN;
-
-            switch (user_table->fifo_port)
-            {
-                case USB_HOST_CUSE:
-                case USB_HOST_D0USE:
-                case USB_HOST_D1USE:
-                case USB_HOST_D0DMA:
-                case USB_HOST_D1DMA:
-                    PipeCfg |= (uint16_t)(user_table->pipe_cfg & USB_HOST_DBLBFIELD);
-                break;
-
-                default:
-                    ret_flag = USB_END_POINT_ERROR;
-                break;
-            }
-
-            if (ret_flag == USB_END_POINT_ERROR)
-            {
-                return ret_flag;
-            }
-        }
-        else
-        {
-            /* Transfer Type is BULK or INT */
-            PipeCfg |= (USB_HOST_SHTNAKON | USB_HOST_DIR_H_IN);             /* Compulsory SHTNAK */
-
-            switch (user_table->fifo_port)
-            {
-                case USB_HOST_CUSE:
-                case USB_HOST_D0USE:
-                case USB_HOST_D1USE:
-                    PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD));
-                break;
-
-                case USB_HOST_D0DMA:
-                case USB_HOST_D1DMA:
-                    PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD));
-#ifdef  __USB_DMA_BFRE_ENABLE__
-                    /* this routine cannnot be perfomred if read operation is executed in buffer size */
-                    PipeCfg |= USB_HOST_BFREON;
-#endif
-                break;
-
-                default:
-                    ret_flag = USB_END_POINT_ERROR;
-                break;
-            }
-
-            if (ret_flag == USB_END_POINT_ERROR)
-            {
-                return ret_flag;
-            }
-        }
-        ret = USB_HOST_PIPE_IN;
-    }
-    else                                                            /* OUT(send)    */
-    {
-        if (PipeCfg == USB_HOST_ISO)
-        {
-            /* Transfer Type is ISO*/
-            PipeCfg |= (uint16_t)(user_table->pipe_cfg & USB_HOST_DBLBFIELD);
-        }
-        else
-        {
-            /* Transfer Type is BULK or INT */
-            PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD));
-        }
-        PipeCfg |= USB_HOST_DIR_H_OUT;
-        ret = USB_HOST_PIPE_OUT;
-    }
-
-    switch (user_table->fifo_port)
-    {
-        case USB_HOST_CUSE:
-            g_usb0_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_CFIFO_USE;
-        break;
-
-        case USB_HOST_D0USE:
-            g_usb0_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D0FIFO_USE;
-        break;
-
-        case USB_HOST_D1USE:
-            g_usb0_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D1FIFO_USE;
-        break;
-
-        case USB_HOST_D0DMA:
-            g_usb0_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D0FIFO_DMA;
-        break;
-
-        case USB_HOST_D1DMA:
-            g_usb0_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D1FIFO_DMA;
-        break;
-
-        default:
-            ret_flag = USB_END_POINT_ERROR;
-        break;
-    }
-
-    if (ret_flag == USB_END_POINT_ERROR)
-    {
-        return ret_flag;
-    }
-
-    /* Endpoint number set              */
-    PipeCfg  |= (uint16_t)(Table[2] & USB_HOST_EP_NUM_MASK);
-    g_usb0_host_PipeTbl[pipe_number] |= (uint16_t)(Table[2] & USB_HOST_EP_NUM_MASK);
-
-    /* Max packet size set              */
-    PipeMaxp  = (uint16_t)((uint16_t)Table[4] | (uint16_t)((uint16_t)Table[5] << 8));
-
-    if (PipeMaxp == 0u)
-    {
-        return USB_END_POINT_ERROR;
-    }
-
-    /* Set device address               */
-    PipeMaxp |= (uint16_t)(devadr << 12);
-
-    user_table->pipe_cfg         = PipeCfg;
-    user_table->pipe_max_pktsize = PipeMaxp;
-
-    usb0_host_resetEP(user_table);
-
-    return ret;
-}
-
-/*******************************************************************************
-* Function Name: usb0_host_resetEP
-* Description  : Sets the end point on the information specified by the argument.
-* Arguments    : USB_HOST_CFG_PIPETBL_t *tbl : pipe table
-* Return Value : none
-*******************************************************************************/
-static void usb0_host_resetEP (USB_HOST_CFG_PIPETBL_t * tbl)
-{
-
-    uint16_t pipe;
-
-    /* Host pipe */
-    /* The pipe number of pipe definition table is obtained */
-    pipe = (uint16_t)(tbl->pipe_number & USB_HOST_BITCURPIPE);  /* Pipe Number */
-
-    /* FIFO port access pipe is set to initial value */
-    /* The connection with FIFO should be cut before setting the pipe */
-    if (RZA_IO_RegRead_16(&USB200.CFIFOSEL,
-                            USB_CFIFOSEL_CURPIPE_SHIFT,
-                            USB_CFIFOSEL_CURPIPE) == pipe)
-    {
-        usb0_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_CUSE, USB_HOST_NO, USB_HOST_BITMBW_16);
-    }
-
-    if (RZA_IO_RegRead_16(&USB200.D0FIFOSEL,
-                            USB_DnFIFOSEL_CURPIPE_SHIFT,
-                            USB_DnFIFOSEL_CURPIPE) == pipe)
-    {
-        usb0_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_D0USE, USB_HOST_NO, USB_HOST_BITMBW_16);
-    }
-
-    if (RZA_IO_RegRead_16(&USB200.D1FIFOSEL,
-                            USB_DnFIFOSEL_CURPIPE_SHIFT,
-                            USB_DnFIFOSEL_CURPIPE) == pipe)
-    {
-        usb0_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_D1USE, USB_HOST_NO, USB_HOST_BITMBW_16);
-    }
-
-    /* Interrupt of pipe set is disabled */
-    usb0_host_disable_brdy_int(pipe);
-    usb0_host_disable_nrdy_int(pipe);
-    usb0_host_disable_bemp_int(pipe);
-
-    /* Pipe to set is set to NAK */
-    usb0_host_set_pid_nak(pipe);
-
-    /* Pipe is set */
-    USB200.PIPESEL  = pipe;
-
-    USB200.PIPECFG  = tbl->pipe_cfg;
-    USB200.PIPEBUF  = tbl->pipe_buf;
-    USB200.PIPEMAXP = tbl->pipe_max_pktsize;
-    USB200.PIPEPERI = tbl->pipe_cycle;
-
-    g_usb0_host_pipecfg[pipe]  = tbl->pipe_cfg;
-    g_usb0_host_pipebuf[pipe]  = tbl->pipe_buf;
-    g_usb0_host_pipemaxp[pipe] = tbl->pipe_max_pktsize;
-    g_usb0_host_pipeperi[pipe] = tbl->pipe_cycle;
-
-    /* Sequence bit clear */
-    usb0_host_set_sqclr(pipe);
-
-    usb0_host_aclrm(pipe);
-    usb0_host_set_csclr(pipe);
-
-    /* Pipe window selection is set to unused */
-    USB200.PIPESEL = USB_HOST_PIPE0;
-
-}
-
-#if(1) /* ohci_wrapp */
-#else
-/*******************************************************************************
-* Function Name: usb0_api_host_data_count
-* Description  : Get g_usb0_host_data_count[pipe]
-* Arguments    : uint16_t pipe        ; Pipe Number
-*              : uint32_t *data_count ; return g_usb0_data_count[pipe]
-* Return Value : DEVDRV_SUCCESS    ; success
-*              : DEVDRV_ERROR      ; error
-*******************************************************************************/
-int32_t usb0_api_host_data_count (uint16_t pipe, uint32_t * data_count)
-{
-    if (pipe > USB_HOST_MAX_PIPE_NO)
-    {
-        return DEVDRV_ERROR;
-    }
-
-    *data_count = g_usb0_host_PipeDataSize[pipe];
-
-    return DEVDRV_SUCCESS;
-}
-#endif
-
-/* End of File */