NOT FINISHED YET!!! My first try to get a self built fully working Quadrocopter based on an mbed, a self built frame and some other more or less cheap parts.
Sensors/I2C_Sensor.cpp
- Committer:
- maetugr
- Date:
- 2012-10-27
- Revision:
- 14:cf260677ecde
- Child:
- 15:753c5d6a63b3
File content as of revision 14:cf260677ecde:
#include "mbed.h" #include "I2C_Sensor.h" // calculate the 8-Bit write/read I2C-Address from the 7-Bit adress of the device #define GET_I2C_WRITE_ADDRESS(ADR) (ADR << 1&0xFE) // ADR & 1111 1110 #define GET_I2C_READ_ADDRESS(ADR) (ADR << 1|0x01) // ADR | 0000 0001 I2C_Sensor::I2C_Sensor(PinName sda, PinName scl, int8_t i2c_address) : i2c(sda, scl), local("local") { I2C_Sensor::i2c_address = i2c_address; //i2c.frequency(400000); // standard speed i2c.frequency(1500000); // ultrafast! } void saveCalibrationValues(float values[], int size, char * filename) { FILE *fp = fopen(strcat("/local/", filename), "w"); for(int i = 0; i < size; i++) fprintf(fp, "%f\r\n", values[i]); fclose(fp); } void loadCalibrationValues(float values[], int size, char * filename) { FILE *fp = fopen(strcat("/local/", filename), "r"); for(int i = 0; i < size; i++) fscanf(fp, "%f", &values[i]); fclose(fp); } void I2C_Sensor::writeRegister(char address, char data){ char tx[2]; tx[0] = address; tx[1] = data; i2c.write(GET_I2C_WRITE_ADDRESS(i2c_address), tx, 2); } void I2C_Sensor::readMultiRegister(char address, char* output, int size) { i2c.write (GET_I2C_WRITE_ADDRESS(i2c_address), &address, 1); //tell it from which register to read i2c.read (GET_I2C_READ_ADDRESS(i2c_address), output, size); //tell it where to store the data read }