long dao
Mbed for VNG board
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_i2s.h
- Revision:
- 394:83f921546702
- Parent:
- 393:17d2d502961d
- Child:
- 395:bfce16e86ea4
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_i2s.h Fri Nov 07 12:00:11 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,454 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l1xx_hal_i2s.h
- * @author MCD Application Team
- * @version V1.0.0
- * @date 5-September-2014
- * @brief Header file of I2S HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L1xx_HAL_I2S_H
-#define __STM32L1xx_HAL_I2S_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32L100xC) || \
- defined(STM32L151xC) || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xE) || \
- defined(STM32L152xC) || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L152xE) || defined(STM32L151xE) || \
- defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l1xx_hal_def.h"
-
-/** @addtogroup STM32L1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup I2S
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup I2S_Exported_Types I2S Exported Types
- * @{
- */
-
-/**
- * @brief I2S Init structure definition
- */
-typedef struct
-{
- uint32_t Mode; /*!< Specifies the I2S operating mode.
- This parameter can be a value of @ref I2S_Mode */
-
- uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
- This parameter can be a value of @ref I2S_Standard */
-
- uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
- This parameter can be a value of @ref I2S_Data_Format */
-
- uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
- This parameter can be a value of @ref I2S_MCLK_Output */
-
- uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
- This parameter can be a value of @ref I2S_Audio_Frequency */
-
- uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
- This parameter can be a value of @ref I2S_Clock_Polarity */
-
-}I2S_InitTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
- HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
- HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
- HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S pause state: used in case of DMA */
- HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */
-}HAL_I2S_StateTypeDef;
-
-/**
- * @brief HAL I2S Error Code structure definition
- */
-typedef enum
-{
- HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2S_ERROR_UDR = 0x01, /*!< I2S Underrun error */
- HAL_I2S_ERROR_OVR = 0x02, /*!< I2S Overrun error */
- HAL_I2S_ERROR_FRE = 0x04, /*!< I2S Frame format error */
- HAL_I2S_ERROR_DMA = 0x08 /*!< DMA transfer error */
-}HAL_I2S_ErrorTypeDef;
-
-/**
- * @brief I2S handle Structure definition
- */
-typedef struct
-{
- SPI_TypeDef *Instance; /* I2S registers base address */
-
- I2S_InitTypeDef Init; /* I2S communication parameters */
-
- uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
-
- __IO uint16_t TxXferSize; /* I2S Tx transfer size */
-
- __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
-
- uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
-
- __IO uint16_t RxXferSize; /* I2S Rx transfer size */
-
- __IO uint16_t RxXferCount; /* I2S Rx transfer counter
- (This field is initialized at the
- same value as transfer size at the
- beginning of the transfer and
- decremented when a sample is received.
- NbSamplesReceived = RxBufferSize-RxBufferCount) */
-
- DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
-
- __IO HAL_LockTypeDef Lock; /* I2S locking object */
-
- __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
-
- __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
-
-}I2S_HandleTypeDef;
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup I2S_Exported_Constants I2S Exported Constants
- * @{
- */
-
-/** @defgroup I2S_Mode I2S Mode
- * @{
- */
-#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
-#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
-#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
-#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
-
-#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
- ((MODE) == I2S_MODE_SLAVE_RX) || \
- ((MODE) == I2S_MODE_MASTER_TX) || \
- ((MODE) == I2S_MODE_MASTER_RX))
-/**
- * @}
- */
-
-/** @defgroup I2S_Standard I2S Standard
- * @{
- */
-#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
-#define I2S_STANDARD_MSB ((uint32_t) SPI_I2SCFGR_I2SSTD_0)
-#define I2S_STANDARD_LSB ((uint32_t) SPI_I2SCFGR_I2SSTD_1)
-#define I2S_STANDARD_PCM_SHORT ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
- SPI_I2SCFGR_I2SSTD_1))
-#define I2S_STANDARD_PCM_LONG ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
- SPI_I2SCFGR_I2SSTD_1 |\
- SPI_I2SCFGR_PCMSYNC))
-
-#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
- ((STANDARD) == I2S_STANDARD_MSB) || \
- ((STANDARD) == I2S_STANDARD_LSB) || \
- ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
- ((STANDARD) == I2S_STANDARD_PCM_LONG))
-/** @defgroup I2S_Legacy I2S Legacy
- * @{
- */
-#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup I2S_Data_Format I2S Data Format
- * @{
- */
-#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
-#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t) SPI_I2SCFGR_CHLEN)
-#define I2S_DATAFORMAT_24B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
-#define I2S_DATAFORMAT_32B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
-
-#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
- ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
- ((FORMAT) == I2S_DATAFORMAT_24B) || \
- ((FORMAT) == I2S_DATAFORMAT_32B))
-/**
- * @}
- */
-
-/** @defgroup I2S_MCLK_Output I2S MCLK Output
- * @{
- */
-#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
-#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
-
-#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
- ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
-/**
- * @}
- */
-
-/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
- * @{
- */
-#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
-#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
-#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
-#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
-#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
-#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
-#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
-#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
-#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
-#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
-
-#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
- ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
- ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
-/**
- * @}
- */
-
-/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
- * @{
- */
-#define I2S_CPOL_LOW ((uint32_t)0x00000000)
-#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
-
-#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
- ((CPOL) == I2S_CPOL_HIGH))
-/**
- * @}
- */
-
-/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
- * @{
- */
-#define I2S_IT_TXE SPI_CR2_TXEIE
-#define I2S_IT_RXNE SPI_CR2_RXNEIE
-#define I2S_IT_ERR SPI_CR2_ERRIE
-/**
- * @}
- */
-
-/** @defgroup I2S_Flag_definition I2S Flag definition
- * @{
- */
-#define I2S_FLAG_TXE SPI_SR_TXE
-#define I2S_FLAG_RXNE SPI_SR_RXNE
-
-#define I2S_FLAG_UDR SPI_SR_UDR
-#define I2S_FLAG_OVR SPI_SR_OVR
-#define I2S_FLAG_FRE SPI_SR_FRE
-
-#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
-#define I2S_FLAG_BSY SPI_SR_BSY
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup I2S_Exported_macros I2S Exported Macros
- * @{
- */
-
-/** @brief Reset I2S handle state
- * @param __HANDLE__: specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
-
-/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
- * @param __HANDLE__: specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
-#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
-
-/** @brief Enable or disable the specified I2S interrupts.
- * @param __HANDLE__: specifies the I2S Handle.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
- * This parameter can be one of the following values:
- * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
- * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
- * @arg I2S_IT_ERR: Error interrupt enable
- * @retval None
- */
-#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
-#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
-
-/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the I2S Handle.
- * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
- * @param __INTERRUPT__: specifies the I2S interrupt source to check.
- * This parameter can be one of the following values:
- * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
- * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
- * @arg I2S_IT_ERR: Error interrupt enable
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Checks whether the specified I2S flag is set or not.
- * @param __HANDLE__: specifies the I2S Handle.
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
- * @arg I2S_FLAG_TXE: Transmit buffer empty flag
- * @arg I2S_FLAG_UDR: Underrun flag
- * @arg I2S_FLAG_OVR: Overrun flag
- * @arg I2S_FLAG_FRE: Frame error flag
- * @arg I2S_FLAG_CHSIDE: Channel Side flag
- * @arg I2S_FLAG_BSY: Busy flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clears the I2S OVR pending flag.
- * @param __HANDLE__: specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
- tmpreg = (__HANDLE__)->Instance->SR;\
- }while(0)
-/** @brief Clears the I2S UDR pending flag.
- * @param __HANDLE__: specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup I2S_Exported_Functions
- * @{
- */
-
-/** @addtogroup I2S_Exported_Functions_Group1
- * @{
- */
-/* Initialization/de-initialization functions ********************************/
-HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
-void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
-/**
- * @}
- */
-
-/** @addtogroup I2S_Exported_Functions_Group2
- * @{
- */
-/* I/O operation functions ***************************************************/
- /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
-
- /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
-
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-
-HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
-
-/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
-void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
-/**
- * @}
- */
-
-/** @addtogroup I2S_Exported_Functions_Group3
- * @{
- */
-/* Peripheral Control and State functions ************************************/
-HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
-HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32L100xC ||
- STM32L151xC || STM32L151xCA || STM32L151xD || STM32L151xE ||\\
- STM32L152xC || STM32L152xCA || STM32L152xD || STM32L152xE || STM32L151xE ||\\
- STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L1xx_HAL_I2S_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/