Mbed for VNG board
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_flash_ramfunc.c
- Revision:
- 394:83f921546702
- Parent:
- 393:17d2d502961d
- Child:
- 395:bfce16e86ea4
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_flash_ramfunc.c Fri Nov 07 12:00:11 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,545 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l1xx_hal_flash_ramfunc.c - * @author MCD Application Team - * @version V1.0.0 - * @date 5-September-2014 - * @brief FLASH RAMFUNC driver. - * This file provides a Flash firmware functions which should be - * executed from internal SRAM - * - * @verbatim - - *** ARM Compiler *** - -------------------- - [..] RAM functions are defined using the toolchain options. - Functions that are be executed in RAM should reside in a separate - source module. Using the 'Options for File' dialog you can simply change - the 'Code / Const' area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the - Options for Target' dialog. - - *** ICCARM Compiler *** - ----------------------- - [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". - - *** GNU Compiler *** - -------------------- - [..] RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". - -@endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l1xx_hal.h" - -/** @addtogroup STM32L1xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHRamfunc FLASHRamfunc - * @brief FLASH functions executed from RAM - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static __RAM_FUNC FLASHRAM_WaitForLastOperation(uint32_t Timeout); - -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup FLASHRamfunc_Exported_Functions FLASH RAM Exported Functions - * -@verbatim - =============================================================================== - ##### ramfunc functions ##### - =============================================================================== - [..] - This subsection provides a set of functions that should be executed from RAM - transfers. - -@endverbatim - * @{ - */ - -/** @defgroup FLASHRamfunc_Exported_Functions_Group1 FLASH RAM Peripheral features functions - * @{ - */ - -/** - * @brief Enable the power down mode during RUN mode. - * @note This function can be used only when the user code is running from Internal SRAM. - * @retval None - */ -__RAM_FUNC HAL_FLASHEx_EnableRunPowerDown(void) -{ - /* Enable the Power Down in Run mode*/ - __HAL_FLASH_POWER_DOWN_ENABLE(); - - return HAL_OK; -} - - -/** - * @brief Disable the power down mode during RUN mode. - * @note This function can be used only when the user code is running from Internal SRAM. - * @retval None - */ -__RAM_FUNC HAL_FLASHEx_DisableRunPowerDown(void) -{ - /* Disable the Power Down in Run mode*/ - __HAL_FLASH_POWER_DOWN_DISABLE(); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup FLASHRamfunc_Exported_Functions_Group2 FLASH RAM Programming and erasing operation functions - * -@verbatim -@endverbatim - * @{ - */ - -#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) || \ - defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) -/** - * @brief Erases a specified 2 page in program memory in parallel. - * @note This function can be used only for STM32L151xD, STM32L152xD), STM32L162xD and Cat5 devices. - * To correctly run this function, the HAL_FLASH_Unlock() function - * must be called before. - * Call the HAL_FLASH_Lock() to disable the flash memory access - * (recommended to protect the FLASH memory against possible unwanted operation). - * @param Page_Address1: The page address in program memory to be erased in - * the first Bank (BANK1). This parameter should be between FLASH_BASE - * and FLASH_BANK1_END. - * @param Page_Address2: The page address in program memory to be erased in - * the second Bank (BANK2). This parameter should be between FLASH_BANK2_BASE - * and FLASH_BANK2_END. - * @note A Page is erased in the Program memory only if the address to load - * is the start address of a page (multiple of 256 bytes). - * @retval HAL Status: The returned value can be: - * HAL_ERROR, HAL_OK or HAL_TIMEOUT. - */ -__RAM_FUNC HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* If the previous operation is completed, proceed to erase the page */ - - /* Set the PARALLBANK bit */ - FLASH->PECR |= FLASH_PECR_PARALLBANK; - - /* Set the ERASE bit */ - FLASH->PECR |= FLASH_PECR_ERASE; - - /* Set PROG bit */ - FLASH->PECR |= FLASH_PECR_PROG; - - /* Write 00000000h to the first word of the first program page to erase */ - *(__IO uint32_t *)Page_Address1 = 0x00000000; - /* Write 00000000h to the first word of the second program page to erase */ - *(__IO uint32_t *)Page_Address2 = 0x00000000; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the ERASE, PROG and PARALLBANK bits */ - FLASH->PECR &= (uint32_t)(~FLASH_PECR_PROG); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_ERASE); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_PARALLBANK); - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Programs 2 half page in program memory in parallel. - * @note This function can be used only for STM32L151xD, STM32L152xD), STM32L162xD and Cat5 devices. - * @param Address1: specifies the first address to be written in the first bank - * (BANK1). This parameter should be between FLASH_BASE and (FLASH_BANK1_END - FLASH_PAGE_SIZE). - * @param pBuffer1: pointer to the buffer containing the data to be written - * to the first half page in the first bank. - * @param Address2: specifies the second address to be written in the second bank - * (BANK2). This parameter should be between FLASH_BANK2_BASE and (FLASH_BANK2_END - FLASH_PAGE_SIZE). - * @param pBuffer2: pointer to the buffer containing the data to be written - * to the second half page in the second bank. - * @note To correctly run this function, the HAL_FLASH_Unlock() function - * must be called before. - * Call the HAL_FLASH_Lock() to disable the flash memory access - * (recommended to protect the FLASH memory against possible unwanted operation). - * @note Half page write is possible only from SRAM. - * @note If there are more than 32 words to write, after 32 words another - * Half Page programming operation starts and has to be finished. - * @note A half page is written to the program memory only if the first - * address to load is the start address of a half page (multiple of 128 - * bytes) and the 31 remaining words to load are in the same half page. - * @note During the Program memory half page write all read operations are - * forbidden (this includes DMA read operations and debugger read - * operations such as breakpoints, periodic updates, etc.). - * @note If a PGAERR is set during a Program memory half page write, the - * complete write operation is aborted. Software should then reset the - * FPRG and PROG/DATA bits and restart the write operation from the - * beginning. - * @retval HAL Status: The returned value can be: - * HAL_ERROR, HAL_OK or HAL_TIMEOUT. - */ -__RAM_FUNC HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2) -{ - uint32_t count = 0; - - HAL_StatusTypeDef status = HAL_OK; - - /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) - This bit prevents the interruption of multicycle instructions and therefore - will increase the interrupt latency. of Cortex-M3. */ - SCnSCB->ACTLR |= SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* If the previous operation is completed, proceed to program the new - half page */ - FLASH->PECR |= FLASH_PECR_PARALLBANK; - FLASH->PECR |= FLASH_PECR_FPRG; - FLASH->PECR |= FLASH_PECR_PROG; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - /* Write the first half page directly with 32 different words */ - while(count < 32) - { - *(__IO uint32_t*) ((uint32_t)(Address1 + (4 * count))) = *(pBuffer1++); - count ++; - } - count = 0; - - /* Write the second half page directly with 32 different words */ - while(count < 32) - { - *(__IO uint32_t*) ((uint32_t)(Address2 + (4 * count))) = *(pBuffer2++); - count ++; - } - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - } - /* if the write operation is completed, disable the PROG, FPRG and PARALLBANK bits */ - FLASH->PECR &= (uint32_t)(~FLASH_PECR_PROG); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_FPRG); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_PARALLBANK); - } - - SCnSCB->ACTLR &= ~SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Return the Write Status */ - return status; -} -#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ - -/** - * @brief Programs a half page in program memory. - * @param Address: specifies the address to be written. - * @param pBuffer: pointer to the buffer containing the data to be written to - * the half page. - * @note To correctly run this function, the HAL_FLASH_Unlock() function - * must be called before. - * Call the HAL_FLASH_Lock() to disable the flash memory access - * (recommended to protect the FLASH memory against possible unwanted operation) - * @note Half page write is possible only from SRAM. - * @note If there are more than 32 words to write, after 32 words another - * Half Page programming operation starts and has to be finished. - * @note A half page is written to the program memory only if the first - * address to load is the start address of a half page (multiple of 128 - * bytes) and the 31 remaining words to load are in the same half page. - * @note During the Program memory half page write all read operations are - * forbidden (this includes DMA read operations and debugger read - * operations such as breakpoints, periodic updates, etc.). - * @note If a PGAERR is set during a Program memory half page write, the - * complete write operation is aborted. Software should then reset the - * FPRG and PROG/DATA bits and restart the write operation from the - * beginning. - * @retval HAL Status: The returned value can be: - * HAL_ERROR, HAL_OK or HAL_TIMEOUT. - */ -__RAM_FUNC HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer) -{ - uint32_t count = 0; - - HAL_StatusTypeDef status = HAL_OK; - - /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) - This bit prevents the interruption of multicycle instructions and therefore - will increase the interrupt latency. of Cortex-M3. */ - SCnSCB->ACTLR |= SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* if the previous operation is completed, proceed to program the new - half page */ - FLASH->PECR |= FLASH_PECR_FPRG; - FLASH->PECR |= FLASH_PECR_PROG; - - /* Write one half page directly with 32 different words */ - while(count < 32) - { - *(__IO uint32_t*) ((uint32_t)(Address + (4 * count))) = *(pBuffer++); - count ++; - } - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - /* if the write operation is completed, disable the PROG and FPRG bits */ - FLASH->PECR &= (uint32_t)(~FLASH_PECR_PROG); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_FPRG); - } - - SCnSCB->ACTLR &= ~SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Return the Write Status */ - return status; -} - -/** - * @} - */ - -/** @defgroup FLASHRamfunc_Exported_Functions_Group3 FLASH RAM DATA EEPROM functions - * -@verbatim -@endverbatim - * @{ - */ - -/** - * @brief Erase a double word in data memory. - * @param Address: specifies the address to be erased. - * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function - * must be called before. - * Call the HAL_FLASH_EEPROM_Lock() to he data EEPROM access - * and Flash program erase control register access(recommended to protect - * the DATA_EEPROM against possible unwanted operation). - * @note Data memory double word erase is possible only from SRAM. - * @note A double word is erased to the data memory only if the first address - * to load is the start address of a double word (multiple of 8 bytes). - * @note During the Data memory double word erase, all read operations are - * forbidden (this includes DMA read operations and debugger read - * operations such as breakpoints, periodic updates, etc.). - * @retval HAL Status: The returned value can be: - * HAL_ERROR, HAL_OK or HAL_TIMEOUT. - */ - -__RAM_FUNC HAL_FLASHEx_DATAEEPROM_EraseDoubleWord(uint32_t Address) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) - This bit prevents the interruption of multicycle instructions and therefore - will increase the interrupt latency. of Cortex-M3. */ - SCnSCB->ACTLR |= SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* If the previous operation is completed, proceed to erase the next double word */ - /* Set the ERASE bit */ - FLASH->PECR |= FLASH_PECR_ERASE; - - /* Set DATA bit */ - FLASH->PECR |= FLASH_PECR_DATA; - - /* Write 00000000h to the 2 words to erase */ - *(__IO uint32_t *)Address = 0x00000000; - Address += 4; - *(__IO uint32_t *)Address = 0x00000000; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the ERASE and DATA bits */ - FLASH->PECR &= (uint32_t)(~FLASH_PECR_ERASE); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_DATA); - } - - SCnSCB->ACTLR &= ~SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Return the erase status */ - return status; -} - -/** - * @brief Write a double word in data memory without erase. - * @param Address: specifies the address to be written. - * @param Data: specifies the data to be written. - * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function - * must be called before. - * Call the HAL_FLASH_EEPROM_Lock() to he data EEPROM access - * and Flash program erase control register access(recommended to protect - * the DATA_EEPROM against possible unwanted operation). - * @note Data memory double word write is possible only from SRAM. - * @note A data memory double word is written to the data memory only if the - * first address to load is the start address of a double word (multiple - * of double word). - * @note During the Data memory double word write, all read operations are - * forbidden (this includes DMA read operations and debugger read - * operations such as breakpoints, periodic updates, etc.). - * @retval HAL Status: The returned value can be: - * HAL_ERROR, HAL_OK or HAL_TIMEOUT. - */ -__RAM_FUNC HAL_FLASHEx_DATAEEPROM_ProgramDoubleWord(uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) - This bit prevents the interruption of multicycle instructions and therefore - will increase the interrupt latency. of Cortex-M3. */ - SCnSCB->ACTLR |= SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* If the previous operation is completed, proceed to program the new data*/ - FLASH->PECR |= FLASH_PECR_FPRG; - FLASH->PECR |= FLASH_PECR_DATA; - - /* Write the 2 words */ - *(__IO uint32_t *)Address = (uint32_t) Data; - Address += 4; - *(__IO uint32_t *)Address = (uint32_t) (Data >> 32); - - /* Wait for last operation to be completed */ - status = FLASHRAM_WaitForLastOperation(HAL_FLASH_TIMEOUT_VALUE); - - /* If the write operation is completed, disable the FPRG and DATA bits */ - FLASH->PECR &= (uint32_t)(~FLASH_PECR_FPRG); - FLASH->PECR &= (uint32_t)(~FLASH_PECR_DATA); - } - - SCnSCB->ACTLR &= ~SCnSCB_ACTLR_DISMCYCINT_Msk; - - /* Return the Write Status */ - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FLASHRamfunc_Private_Functions FLASH RAM Private Functions - * @{ - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout: maximum flash operationtimeout - * @retval HAL status - */ -static __RAM_FUNC FLASHRAM_WaitForLastOperation(uint32_t Timeout) -{ - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) && (Timeout != 0x00)) - { - Timeout--; - } - - if(Timeout == 0x00 ) - { - return HAL_TIMEOUT; - } - - if( (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) || - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) || - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) != RESET) || -#if defined (STM32L151xBA) || defined (STM32L152xBA) || \ - defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) || -#endif /* STM32L151xBA || STM32L152xBA || STM32L151xC || STM32L152xC || STM32L162xC */ -#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || \ - defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || \ - defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR) != RESET) || -#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) != RESET) ) - { - return HAL_ERROR; - } - - /* If there is an error flag set */ - return HAL_OK; -} - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/