Mbed for VNG board
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_dma.h
- Revision:
- 394:83f921546702
- Parent:
- 393:17d2d502961d
- Child:
- 395:bfce16e86ea4
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_dma.h Fri Nov 07 12:00:11 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,444 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l1xx_hal_dma.h - * @author MCD Application Team - * @version V1.0.0 - * @date 5-September-2014 - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L1xx_HAL_DMA_H -#define __STM32L1xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l1xx_hal_def.h" - -/** @addtogroup STM32L1xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMA_Exported_Types DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. - This parameter can be a value of @ref DMA_Priority_level */ - -} DMA_InitTypeDef; - -/** - * @brief DMA Configuration enumeration values definition - */ -typedef enum -{ - DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */ - DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */ - -} DMA_ControlTypeDef; - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */ - HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */ - HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */ - -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */ - -}HAL_DMA_LevelCompleteTypeDef; - - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Channel_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - -} DMA_HandleTypeDef; -/** - * @} - */ - - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA_Error_Code - * @{ - */ -#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */ -#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ -/** - * @} - */ - - -/** @defgroup DMA_Data_transfer_direction DMA_Data_transfer_direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */ - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) -/** - * @} - */ - -/** @defgroup DMA_Data_buffer_size DMA_Data_buffer_size - * @{ - */ -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA_Peripheral_incremented_mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ -#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */ - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA_Memory_incremented_mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ -#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */ - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA_Peripheral_data_size - * @{ - */ -#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */ - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) -/** - * @} - */ - - -/** @defgroup DMA_Memory_data_size DMA_Memory_data_size - * @{ - */ -#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */ - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) -/** - * @} - */ - -/** @defgroup DMA_mode DMA_mode - * @{ - */ -#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */ - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR)) -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA_Priority_level - * @{ - */ -#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) -/** - * @} - */ - - -/** @defgroup DMA_interrupt_enable_definitions DMA_interrupt_enable_definitions - * @{ - */ - -#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) - -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA_flag_definitions - * @{ - */ - -#define DMA_FLAG_GL1 ((uint32_t)0x00000001) -#define DMA_FLAG_TC1 ((uint32_t)0x00000002) -#define DMA_FLAG_HT1 ((uint32_t)0x00000004) -#define DMA_FLAG_TE1 ((uint32_t)0x00000008) -#define DMA_FLAG_GL2 ((uint32_t)0x00000010) -#define DMA_FLAG_TC2 ((uint32_t)0x00000020) -#define DMA_FLAG_HT2 ((uint32_t)0x00000040) -#define DMA_FLAG_TE2 ((uint32_t)0x00000080) -#define DMA_FLAG_GL3 ((uint32_t)0x00000100) -#define DMA_FLAG_TC3 ((uint32_t)0x00000200) -#define DMA_FLAG_HT3 ((uint32_t)0x00000400) -#define DMA_FLAG_TE3 ((uint32_t)0x00000800) -#define DMA_FLAG_GL4 ((uint32_t)0x00001000) -#define DMA_FLAG_TC4 ((uint32_t)0x00002000) -#define DMA_FLAG_HT4 ((uint32_t)0x00004000) -#define DMA_FLAG_TE4 ((uint32_t)0x00008000) -#define DMA_FLAG_GL5 ((uint32_t)0x00010000) -#define DMA_FLAG_TC5 ((uint32_t)0x00020000) -#define DMA_FLAG_HT5 ((uint32_t)0x00040000) -#define DMA_FLAG_TE5 ((uint32_t)0x00080000) -#define DMA_FLAG_GL6 ((uint32_t)0x00100000) -#define DMA_FLAG_TC6 ((uint32_t)0x00200000) -#define DMA_FLAG_HT6 ((uint32_t)0x00400000) -#define DMA_FLAG_TE6 ((uint32_t)0x00800000) -#define DMA_FLAG_GL7 ((uint32_t)0x01000000) -#define DMA_FLAG_TC7 ((uint32_t)0x02000000) -#define DMA_FLAG_HT7 ((uint32_t)0x04000000) -#define DMA_FLAG_TE7 ((uint32_t)0x08000000) - - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup DMA_Exported_macros DMA Exported Macros - * @{ - */ - -/** @brief Reset DMA handle state - * @param __HANDLE__: DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Enable the specified DMA Channel. - * @param __HANDLE__: DMA handle - * @retval None. - */ -#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) - -/** - * @brief Disable the specified DMA Channel. - * @param __HANDLE__: DMA handle - * @retval None. - */ -#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) - - -/* Interrupt & Flag management */ - -/** - * @brief Enables the specified DMA Channel interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) - -/** - * @brief Disables the specified DMA Channel interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) - -/** - * @brief Checks whether the specified DMA Channel interrupt has occurred or not. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval The state of DMA_IT (SET or RESET). - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** - * @} - */ - - -/* Include DMA HAL Extension module */ -#include "stm32l1xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions - * @{ - */ - - -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); - -/* Peripheral State and Error functions ***************************************/ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L1xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/