long dao
Mbed for VNG board
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_adc_ex.h
- Revision:
- 394:83f921546702
- Parent:
- 393:17d2d502961d
- Child:
- 395:bfce16e86ea4
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_adc_ex.h Fri Nov 07 12:00:11 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,693 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l1xx_hal_adc_ex.h
- * @author MCD Application Team
- * @version V1.0.0
- * @date 5-September-2014
- * @brief Header file of ADC HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L1xx_HAL_ADC_EX_H
-#define __STM32L1xx_HAL_ADC_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l1xx_hal_def.h"
-
-/** @addtogroup STM32L1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup ADCEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
- * @{
- */
-
-/**
- * @brief ADC Configuration injected Channel structure definition
- * @note Parameters of this structure are shared within 2 scopes:
- * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
- * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
- * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
- * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
- * ADC state can be either:
- * - For all parameters: ADC disabled
- * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
- * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
- */
-typedef struct
-{
- uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
- This parameter can be a value of @ref ADC_channels
- Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
- uint32_t InjectedRank; /*!< Rank in the injected group sequencer
- This parameter must be a value of @ref ADCEx_injected_rank
- Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
- uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
- Unit: ADC clock cycles
- Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
- This parameter can be a value of @ref ADC_sampling_times
- Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
- If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
- Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
- sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
- Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
- uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
- Offset value must be a positive number.
- Depending of ADC resolution selected (12, 10, 8 or 6 bits),
- this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
- uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
- To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
- This parameter must be a number between Min_Data = 1 and Max_Data = 4.
- Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
- configure a channel on injected group can impact the configuration of other channels previously set. */
- uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
- Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
- Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
- This parameter can be set to ENABLE or DISABLE.
- Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
- Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
- configure a channel on injected group can impact the configuration of other channels previously set. */
- uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
- This parameter can be set to ENABLE or DISABLE.
- Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
- Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
- Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
- To maintain JAUTO always enabled, DMA must be configured in circular mode.
- Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
- configure a channel on injected group can impact the configuration of other channels previously set. */
- uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
- If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
- If set to external trigger source, triggering is on event rising edge.
- This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
- Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
- If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
- Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
- configure a channel on injected group can impact the configuration of other channels previously set. */
- uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
- This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
- If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
- Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
- configure a channel on injected group can impact the configuration of other channels previously set. */
-}ADC_InjectionConfTypeDef;
-/**
- * @}
- */
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
- * @{
- */
-
-/** @defgroup ADCEx_injected_rank ADCEx injected rank
- * @{
- */
-#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
-#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
-#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
-#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
-
-#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
- ((CHANNEL) == ADC_INJECTED_RANK_2) || \
- ((CHANNEL) == ADC_INJECTED_RANK_3) || \
- ((CHANNEL) == ADC_INJECTED_RANK_4) )
-/**
- * @}
- */
-
-/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx External trigger edge Injected
- * @{
- */
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000)
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
-#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
-
-#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
- ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \
- ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \
- ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) )
-/**
- * @}
- */
-
-/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger source Injected
- * @{
- */
-/* External triggers for injected groups of ADC1 */
-#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC_EXTERNALTRIGINJEC_T2_CC1
-#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC_EXTERNALTRIGINJEC_T2_TRGO
-#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC_EXTERNALTRIGINJEC_T3_CC4
-#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC_EXTERNALTRIGINJEC_T4_TRGO
-#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ADC_EXTERNALTRIGINJEC_T4_CC1
-#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ADC_EXTERNALTRIGINJEC_T4_CC2
-#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC_EXTERNALTRIGINJEC_T4_CC3
-#define ADC_EXTERNALTRIGINJECCONV_T7_TRGO ADC_EXTERNALTRIGINJEC_T7_TRGO
-#define ADC_EXTERNALTRIGINJECCONV_T9_CC1 ADC_EXTERNALTRIGINJEC_T9_CC1
-#define ADC_EXTERNALTRIGINJECCONV_T9_TRGO ADC_EXTERNALTRIGINJEC_T9_TRGO
-#define ADC_EXTERNALTRIGINJECCONV_T10_CC1 ADC_EXTERNALTRIGINJEC_T10_CC1
-#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC_EXTERNALTRIGINJEC_EXT_IT15
-
-#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000010)
-
-#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_CC1) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_TRGO) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T10_CC1) || \
- ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
- ((REGTRIG) == ADC_SOFTWARE_START) )
-/**
- * @}
- */
-
-/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADCEx Internal HAL driver Ext trig src Injected
- * @{
- */
-
-/* List of external triggers of injected group for ADC1: */
-/* (used internally by HAL driver. To not use into HAL structure parameters) */
-#define ADC_EXTERNALTRIGINJEC_T9_CC1 ((uint32_t) 0x00000000)
-#define ADC_EXTERNALTRIGINJEC_T9_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_0))
-#define ADC_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 ))
-#define ADC_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
-#define ADC_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_2 ))
-#define ADC_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
-#define ADC_EXTERNALTRIGINJEC_T4_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 ))
-#define ADC_EXTERNALTRIGINJEC_T4_CC2 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
-#define ADC_EXTERNALTRIGINJEC_T4_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 ))
-#define ADC_EXTERNALTRIGINJEC_T10_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
-#define ADC_EXTERNALTRIGINJEC_T7_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 ))
-#define ADC_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
-
-/**
- * @}
- */
-
-
-/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
- * @{
- */
-#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup ADCEx_Exported_Macros ADCEx Exported Macros
- * @{
- */
-/* Macro for internal HAL driver usage, and possibly can be used into code of */
-/* final user. */
-
-/**
- * @brief Selection of channels bank.
- * Note: Banks availability depends on devices categories.
- * This macro is intended to change bank selection quickly on the fly,
- * without going through ADC init structure update and execution of function
- * 'HAL_ADC_Init()'.
- * @param __HANDLE__: ADC handle
- * @param __BANK__: Bank selection. This parameter can be a value of @ref ADC_ChannelsBank.
- * @retval None
- */
-#define __HAL_ADC_CHANNELS_BANK(__HANDLE__, __BANK__) \
- MODIFY_REG((__HANDLE__)->Instance->CR2, ADC_CR2_CFG, (__BANK__))
-
-#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-/**
- * @brief Configures the ADC channels speed.
- * Limited to channels 3, 8, 13 and to devices category Cat.3, Cat.4, Cat.5.
- * - For ADC_CHANNEL_3: Used as ADC direct channel (fast channel) if OPAMP1 is
- * in power down mode.
- * - For ADC_CHANNEL_8: Used as ADC direct channel (fast channel) if OPAMP2 is
- * in power down mode.
- * - For ADC_CHANNEL_13: Used as ADC re-routed channel if OPAMP3 is in
- * power down mode. Otherwise, channel 13 is connected to OPAMP3 output and
- * routed through switches COMP1_SW1 and VCOMP to ADC switch matrix.
- * (Note: OPAMP3 is available on STM32L1 Cat.4 only).
- * @param __CHANNEL__: ADC channel
- * This parameter can be one of the following values:
- * @arg ADC_CHANNEL_3: Channel 3 is selected.
- * @arg ADC_CHANNEL_8: Channel 8 is selected.
- * @arg ADC_CHANNEL_13: Channel 13 is selected.
- * @retval None
- */
-#define __HAL_ADC_CHANNEL_SPEED_FAST(__CHANNEL__) \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \
- )? \
- (SET_BIT(COMP->CSR, COMP_CSR_FCH3)) \
- : \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \
- )? \
- (SET_BIT(COMP->CSR, COMP_CSR_FCH8)) \
- : \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \
- )? \
- (SET_BIT(COMP->CSR, COMP_CSR_RCH13)) \
- : \
- (SET_BIT(COMP->CSR, 0x00000000)) \
- ) \
- ) \
- )
-
-#define __HAL_ADC_CHANNEL_SPEED_SLOW(__CHANNEL__) \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \
- )? \
- (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH3)) \
- : \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \
- )? \
- (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH8)) \
- : \
- ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \
- )? \
- (CLEAR_BIT(COMP->CSR, COMP_CSR_RCH13)) \
- : \
- (SET_BIT(COMP->CSR, 0x00000000)) \
- ) \
- ) \
- )
-#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @}
- */
-
-/* Private macro ------------------------------------------------------------*/
-
-/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
- * @{
- */
-/* Macro reserved for internal HAL driver usage, not intended to be used in */
-/* code of final user. */
-
-/**
- * @brief Set ADC number of ranks into regular channel sequence length.
- * @param _NbrOfConversion_: Regular channel sequence length
- * @retval None
- */
-#define __ADC_SQR1_L(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << POSITION_VAL(ADC_SQR1_L))
-
-/**
- * @brief Set ADC ranks available in register SQR1.
- * Register SQR1 bits availability depends on device category.
- * @param _NbrOfConversion_: Regular channel sequence length
- * @retval None
- */
-#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_SQR1_SQXX ADC_SQR1_SQ28 | ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25
-#else
-#define __ADC_SQR1_SQXX ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25
-#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Set the ADC's sample time for channel numbers between 30 and 31.
- * Register SMPR0 availability depends on device category. If register is not
- * available on the current device, this macro does nothing.
- * @retval None
- * @param _SAMPLETIME_: Sample time parameter.
- * @param _CHANNELNB_: Channel number.
- * @retval None
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 30)))
-#else
-#define __ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) ((uint32_t)0x00000000)
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-/**
- * @brief Set the ADC's sample time for channel numbers between 20 and 29.
- * @param _SAMPLETIME_: Sample time parameter.
- * @param _CHANNELNB_: Channel number.
- * @retval None
- */
-#define __ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20)))
-#else
-/**
- * @brief Set the ADC's sample time for channel numbers between 20 and 26.
- * @param _SAMPLETIME_: Sample time parameter.
- * @param _CHANNELNB_: Channel number.
- * @retval None
- */
-#define __ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20)))
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Defines the highest channel available in register SMPR1. Channels
- * availability depends on device category:
- * Highest channel in register SMPR1 is channel 26 for devices Cat.1, Cat.2, Cat.3
- * Highest channel in register SMPR1 is channel 29 for devices Cat.4, Cat.5
- * @param None
- * @retval None
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_29
-#else
-#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_26
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Set the ADC's sample time for channel numbers between 10 and 18.
- * @param _SAMPLETIME_: Sample time parameter.
- * @param _CHANNELNB_: Channel number.
- * @retval None
- */
-#define __ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
-
-/**
- * @brief Set the ADC's sample time for channel numbers between 0 and 9.
- * @param _SAMPLETIME_: Sample time parameter.
- * @param _CHANNELNB_: Channel number.
- * @retval None
- */
-#define __ADC_SMPR3(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
-
-/**
- * @brief Set the selected regular channel rank for rank between 1 and 6.
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @retval None
- */
-#define __ADC_SQR5_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1)))
-
-/**
- * @brief Set the selected regular channel rank for rank between 7 and 12.
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @retval None
- */
-#define __ADC_SQR4_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7)))
-
-/**
- * @brief Set the selected regular channel rank for rank between 13 and 18.
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @retval None
- */
-#define __ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13)))
-
-/**
- * @brief Set the selected regular channel rank for rank between 19 and 24.
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @retval None
- */
-#define __ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 19)))
-
-/**
- * @brief Set the selected regular channel rank for rank between 25 and 28.
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @retval None
- */
-#define __ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 25)))
-
-/**
- * @brief Set the injected sequence length.
- * @param _JSQR_JL_: Sequence length.
- * @retval None
- */
-#define __ADC_JSQR_JL(_JSQR_JL_) (((_JSQR_JL_) -1) << 20)
-
-/**
- * @brief Set the selected injected Channel rank (channels sequence starting from 4-JL)
- * @param _CHANNELNB_: Channel number.
- * @param _RANKNB_: Rank number.
- * @param _JSQR_JL_: Sequence length.
- * @retval None
- */
-#define __ADC_JSQR_RK(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \
- ((_CHANNELNB_) << (5 * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1)))
-
-
-/**
- * @brief Enable the ADC DMA continuous request.
- * @param _DMACONTREQ_MODE_: DMA continuous request mode.
- * @retval None
- */
-#define __ADC_CR2_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << POSITION_VAL(ADC_CR2_DDS))
-
-/**
- * @brief Enable ADC continuous conversion mode.
- * @param _CONTINUOUS_MODE_: Continuous mode.
- * @retval None
- */
-#define __ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << POSITION_VAL(ADC_CR2_CONT))
-
-/**
- * @brief Define mask of configuration bits of ADC and regular group in
- * register CR2 (bits of ADC enable, conversion start and injected group are
- * excluded of this mask).
- * @retval None
- */
-#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_CR2_MASK_ADCINIT() \
- (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CFG | ADC_CR2_CONT)
-#else
-#define __ADC_CR2_MASK_ADCINIT() \
- (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CONT)
-#endif
-
-/**
- * @brief Configures the number of discontinuous conversions for the regular group channels.
- * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
- * @retval None
- */
-#define __ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) (((_NBR_DISCONTINUOUS_CONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM))
-
-/**
- * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
- * @param _SCAN_MODE_: Scan conversion mode.
- * @retval None
- */
-#define __ADC_CR1_SCAN(_SCAN_MODE_) \
- ( ( (_SCAN_MODE_) == (ADC_SCAN_ENABLE) \
- )? (ADC_CR1_SCAN) : (0x00000000) \
- )
-
-/**
- * @brief Get the maximum ADC conversion cycles on all channels.
- * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
- * Approximation of sampling time within 2 ranges, returns the higher value:
- * below 24 cycles {4 cycles; 9 cycles; 16 cycles; 24 cycles}
- * between 48 cycles and 384 cycles {48 cycles; 96 cycles; 192 cycles; 384 cycles}
- * Unit: ADC clock cycles
- * @param __HANDLE__: ADC handle
- * @retval ADC conversion cycles on all channels
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
- (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \
- (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
- (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) && \
- (((__HANDLE__)->Instance->SMPR0 & ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT2) == RESET) ) ? \
- \
- ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \
- )
-#else
-#define __ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
- (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \
- (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
- (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \
- \
- ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \
- )
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Get the ADC clock prescaler from ADC common control register
- * and convert it to its decimal number setting (refer to reference manual)
- * @retval None
- */
-#define __ADC_GET_CLOCK_PRESCALER_DECIMAL(__HANDLE__) \
- ((0x01) << ((ADC->CCR & ADC_CCR_ADCPRE) >> POSITION_VAL(ADC_CCR_ADCPRE)))
-
-/**
- * @brief Clear register SMPR0.
- * Register SMPR0 availability depends on device category. If register is not
- * available on the current device, this macro performs no action.
- * @param __HANDLE__: ADC handle
- * @retval None
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_SMPR0_CLEAR(__HANDLE__) \
- (CLEAR_BIT((__HANDLE__)->Instance->SMPR0, (ADC_SMPR0_SMP31 | ADC_SMPR0_SMP30)))
-#else
-#define __ADC_SMPR0_CLEAR(__HANDLE__) __NOP()
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Clear register CR2.
- * @param __HANDLE__: ADC handle
- * @retval None
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_CR2_CLEAR(__HANDLE__) \
- (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \
- ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \
- ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \
- ADC_CR2_DMA | ADC_CR2_DELS | ADC_CR2_CFG | \
- ADC_CR2_CONT | ADC_CR2_ADON )) \
- )
-#else
-#define __ADC_CR2_CLEAR(__HANDLE__) \
- (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \
- ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \
- ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \
- ADC_CR2_DMA | ADC_CR2_DELS | \
- ADC_CR2_CONT | ADC_CR2_ADON )) \
- )
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-/**
- * @brief Set the sampling time of selected channel on register SMPR0
- * Register SMPR0 availability depends on device category. If register is not
- * available on the current device, this macro performs no action.
- * @param __HANDLE__: ADC handle
- * @param _SAMPLETIME_: Sample time parameter.
- * @param __CHANNEL__: Channel number.
- * @retval None
- */
-#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE)
-#define __ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) \
- MODIFY_REG((__HANDLE__)->Instance->SMPR0, \
- __ADC_SMPR0(ADC_SMPR0_SMP30, (__CHANNEL__)), \
- __ADC_SMPR0((_SAMPLETIME_), (__CHANNEL__)) )
-#else
-#define __ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) __NOP()
-#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */
-
-
-/**
- * @brief Enable the ADC peripheral
- * @param __HANDLE__: ADC handle
- * @retval None
- */
-#define __ADC_ENABLE(__HANDLE__) \
- (__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON
-
-/**
- * @brief Disable the ADC peripheral
- * @param __HANDLE__: ADC handle
- * @retval None
- */
-#define __ADC_DISABLE(__HANDLE__) \
- (__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON
-
-/**
- * @}
- */
-
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup ADCEx_Exported_Functions
- * @{
- */
-
-/* IO operation functions *****************************************************/
-/** @addtogroup ADCEx_Exported_Functions_Group1
- * @{
- */
-
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
-HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
-HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
-
-/* Non-blocking mode: Interruption */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
-HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
-
-/* ADC retrieve conversion value intended to be used with polling or interruption */
-uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
-
-/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
-void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
-/**
- * @}
- */
-
-
-/* Peripheral Control functions ***********************************************/
-/** @addtogroup ADCEx_Exported_Functions_Group2
- * @{
- */
-
-HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L1xx_HAL_ADC_EX_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/