DongEun Koak
mbed library sources
Dependents: Freedman_v2 Nucleo_i2c_OLED_BME280_copy
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.s
- Revision:
- 577:15494b56c2f3
- Parent:
- 576:99a3d3d9c43f
- Child:
- 578:dd2bc6eabbef
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.s Tue Jun 30 09:45:08 2015 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,333 +0,0 @@ -/************************************************** - * - * Part one of the system initialization code, contains low-level - * initialization, plain thumb variant. - * - * Copyright 2012 IAR Systems. All rights reserved. - * - * $Revision: 28 $ - * - **************************************************/ - -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - - PUBLIC __vector_table - PUBLIC __vector_table_0x1c - DATA - - -__vector_table - DCD sfe(CSTACK) ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler -__vector_table_0x1c - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx - DCD FLEX_INT1_IRQHandler - DCD FLEX_INT2_IRQHandler - DCD FLEX_INT3_IRQHandler - DCD FLEX_INT4_IRQHandler - DCD FLEX_INT5_IRQHandler - DCD FLEX_INT6_IRQHandler - DCD FLEX_INT7_IRQHandler - DCD GINT0_IRQHandler - DCD GINT1_IRQHandler ; PIO0 (0:7) - DCD Reserved_IRQHandler ; Reserved - DCD Reserved_IRQHandler - DCD Reserved_IRQHandler - DCD Reserved_IRQHandler - DCD SSP1_IRQHandler ; SSP1 - DCD I2C_IRQHandler ; I2C - DCD TIMER16_0_IRQHandler ; 16-bit Timer0 - DCD TIMER16_1_IRQHandler ; 16-bit Timer1 - DCD TIMER32_0_IRQHandler ; 32-bit Timer0 - DCD TIMER32_1_IRQHandler ; 32-bit Timer1 - DCD SSP0_IRQHandler ; SSP0 - DCD UART_IRQHandler ; UART - DCD USB_IRQHandler ; USB IRQ - DCD USB_FIQHandler ; USB FIQ - DCD ADC_IRQHandler ; A/D Converter - DCD WDT_IRQHandler ; Watchdog timer - DCD BOD_IRQHandler ; Brown Out Detect - DCD FMC_IRQHandler ; IP2111 Flash Memory Controller - DCD Reserved_IRQHandler ; Reserved - DCD Reserved_IRQHandler ; Reserved - DCD USBWakeup_IRQHandler ; USB wake up - DCD Reserved_IRQHandler ; Reserved - - ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space - - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - PUBWEAK Reset_Handler - SECTION .text:CODE:NOROOT:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - PUBWEAK HardFault_Handler - PUBWEAK MemManage_Handler - PUBWEAK BusFault_Handler - PUBWEAK UsageFault_Handler - PUBWEAK SVC_Handler - PUBWEAK DebugMon_Handler - PUBWEAK PendSV_Handler - PUBWEAK SysTick_Handler - PUBWEAK FLEX_INT0_IRQHandler - PUBWEAK FLEX_INT1_IRQHandler - PUBWEAK FLEX_INT2_IRQHandler - PUBWEAK FLEX_INT3_IRQHandler - PUBWEAK FLEX_INT4_IRQHandler - PUBWEAK FLEX_INT5_IRQHandler - PUBWEAK FLEX_INT6_IRQHandler - PUBWEAK FLEX_INT7_IRQHandler - PUBWEAK GINT0_IRQHandler - PUBWEAK GINT1_IRQHandler - PUBWEAK SSP1_IRQHandler - PUBWEAK I2C_IRQHandler - PUBWEAK TIMER16_0_IRQHandler - PUBWEAK TIMER16_1_IRQHandler - PUBWEAK TIMER32_0_IRQHandler - PUBWEAK TIMER32_1_IRQHandler - PUBWEAK SSP0_IRQHandler - PUBWEAK UART_IRQHandler - PUBWEAK USB_IRQHandler - PUBWEAK USB_FIQHandler - PUBWEAK ADC_IRQHandler - PUBWEAK WDT_IRQHandler - PUBWEAK BOD_IRQHandler - PUBWEAK FMC_IRQHandler - PUBWEAK USBWakeup_IRQHandler - PUBWEAK Reserved_IRQHandler - - SECTION .text:CODE:REORDER:NOROOT(1) - THUMB -NMI_Handler: - B . -HardFault_Handler: - B . -MemManage_Handler: - B . -BusFault_Handler: - B . -UsageFault_Handler: - B . -SVC_Handler: - B . -DebugMon_Handler: - B . -PendSV_Handler: - B . -SysTick_Handler: - B . -FLEX_INT0_IRQHandler: - B . -FLEX_INT1_IRQHandler: - B . -FLEX_INT2_IRQHandler: - B . -FLEX_INT3_IRQHandler: - B . -FLEX_INT4_IRQHandler: - B . -FLEX_INT5_IRQHandler: - B . -FLEX_INT6_IRQHandler: - B . -FLEX_INT7_IRQHandler: - B . -GINT0_IRQHandler: - B . -GINT1_IRQHandler: - B . -SSP1_IRQHandler: - B . -I2C_IRQHandler: - B . -TIMER16_0_IRQHandler: - B . -TIMER16_1_IRQHandler: - B . -TIMER32_0_IRQHandler: - B . -TIMER32_1_IRQHandler: - B . -SSP0_IRQHandler: - B . -UART_IRQHandler: - B . -USB_IRQHandler: - B . -USB_FIQHandler: - B . -ADC_IRQHandler: - B . -WDT_IRQHandler: - B . -BOD_IRQHandler: - B . -FMC_IRQHandler: - B . -USBWakeup_IRQHandler: - B . -Reserved_IRQHandler: - B . -Default_Handler: - B . - - SECTION .crp:CODE:ROOT(2) - DATA -/* Code Read Protection -NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode -CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. - - Copy RAM to flash command can not write to Sector 0. - - Erase command can erase Sector 0 only when all sectors - are selected for erase. - - Compare command is disabled. - - Read Memory command is disabled. -CRP2 0x87654321 - Read Memory is disabled. - - Write to RAM is disabled. - - "Go" command is disabled. - - Copy RAM to flash is disabled. - - Compare is disabled. -CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry - by pulling PIO0_1 LOW is disabled if a valid user code is - present in flash sector 0. -Caution: If CRP3 is selected, no future factory testing can be -performed on the device. -*/ - DCD 0xFFFFFFFF - - END