The official mbed C/C SDK provides the software platform and libraries to build your applications.

Dependents:   SeeedTouchLCD

Fork of mbed by mbed official

(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/

(13.March.2014) updated to 0.5.0

This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.

  • So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)

Photos

  • Board photo vvv /media/uploads/k4zuki/mbedshield050.brd.png
  • Schematic photo vvv /media/uploads/k4zuki/mbedshield050.sch.png
  • Functionality photo vvv /media/uploads/k4zuki/mbedshieldfunc.jpg

Latest eagle files

PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch

BIG changes from previous version

  1. Ethernet RJ45 connector is removed.
    1. http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
  2. Most ALL of components can be bought at Akizuki http://akizukidenshi.com/
    1. But sorry, they do not send parts to abroad
  3. Pinout is changed!
arduino0.4.00.5.0
D4p12p21
D5p11p22
MOSI_nonep11
MISO_nonep12
SCK_nonep13

This design has bug(s)

  1. I2C functional pin differs between 1768 and 11U24.

Fixed bugs here

  1. MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
    1. http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
  2. the 6-pin ISP port is not inprimented in version 0.4.0
    1. it will be fixed in later version 0.4.1/0.4.2/0.5.0 This has beenfixed

I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...

you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.

To do this you have to edit PinName enum in

  • "mbed/TARGET_LPC1768/PinNames.h" or
  • "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.

here is the actual list: This list includes define switch to switch pin assignment

part_of_PinNames.h

        USBTX = P0_2,
        USBRX = P0_3,

//from here mbeDshield mod
        D0=p27,
        D1=p28,
        D2=p14,
        D3=p13,
#ifdef MBEDSHIELD_050
        MOSI_=p11,
        MISO_=p12,
        SCK_=p13,
        D4=p21,
        D5=p22,
#else
        D4=p12,
        D5=p11,
#endif
        D6=p23,
        D7=p24,
        D8=p25,
        D9=p26,
        D10=p8,
        D11=p5,
        D12=p6,
        D13=p7,
        A0=p15,
        A1=p16,
        A2=p17,
        A3=p18,
        A4=p19,
        A5=p20,
        SDA=p9,
        SCL=p10,
//mbeDshield mod ends here
        // Not connected
        NC = (int)0xFFFFFFFF

gpio_irq_api.h

Committer:
bogdanm
Date:
2013-10-23
Revision:
68:f37f3b9c9f0b
Parent:
65:5798e58a58b1

File content as of revision 68:f37f3b9c9f0b:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_GPIO_IRQ_API_H
#define MBED_GPIO_IRQ_API_H

#include "device.h"

#if DEVICE_INTERRUPTIN

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    IRQ_NONE,
    IRQ_RISE,
    IRQ_FALL
} gpio_irq_event;

typedef struct gpio_irq_s gpio_irq_t;

typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);

int  gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
void gpio_irq_free(gpio_irq_t *obj);
void gpio_irq_set (gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
void gpio_irq_enable(gpio_irq_t *obj);
void gpio_irq_disable(gpio_irq_t *obj);

#ifdef __cplusplus
}
#endif

#endif

#endif