Diff: I2CSlave.h

Revision:

65:5798e58a58b1

Parent:

59:0883845fe643

--- a/I2CSlave.h	Mon Aug 05 12:28:09 2013 +0300
+++ b/I2CSlave.h	Mon Aug 12 13:17:46 2013 +0300
@@ -1,154 +1,154 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_I2C_SLAVE_H
-#define MBED_I2C_SLAVE_H
-
-#include "platform.h"
-
-#if DEVICE_I2CSLAVE
-
-#include "i2c_api.h"
-
-namespace mbed {
-
-/** An I2C Slave, used for communicating with an I2C Master device
- *
- * Example:
- * @code
- * // Simple I2C responder
- * #include <mbed.h>
- *
- * I2CSlave slave(p9, p10);
- *
- * int main() {
- *     char buf[10];
- *     char msg[] = "Slave!";
- *
- *     slave.address(0xA0);
- *     while (1) {
- *         int i = slave.receive();
- *         switch (i) {
- *             case I2CSlave::ReadAddressed:
- *                 slave.write(msg, strlen(msg) + 1); // Includes null char
- *                 break;
- *             case I2CSlave::WriteGeneral:
- *                 slave.read(buf, 10);
- *                 printf("Read G: %s\n", buf);
- *                 break;
- *             case I2CSlave::WriteAddressed:
- *                 slave.read(buf, 10);
- *                 printf("Read A: %s\n", buf);
- *                 break;
- *         }
- *         for(int i = 0; i < 10; i++) buf[i] = 0;    // Clear buffer
- *     }
- * }
- * @endcode
- */
-class I2CSlave {
-
-public:
-    enum RxStatus {
-        NoData         = 0,
-        ReadAddressed  = 1,
-        WriteGeneral   = 2,
-        WriteAddressed = 3
-    };
-
-    /** Create an I2C Slave interface, connected to the specified pins.
-     *
-     *  @param sda I2C data line pin
-     *  @param scl I2C clock line pin
-     */
-    I2CSlave(PinName sda, PinName scl);
-
-    /** Set the frequency of the I2C interface
-     *
-     *  @param hz The bus frequency in hertz
-     */
-    void frequency(int hz);
-
-    /** Checks to see if this I2C Slave has been addressed.
-     *
-     *  @returns
-     *  A status indicating if the device has been addressed, and how
-     *  - NoData            - the slave has not been addressed
-     *  - ReadAddressed     - the master has requested a read from this slave
-     *  - WriteAddressed    - the master is writing to this slave
-     *  - WriteGeneral      - the master is writing to all slave
-     */
-    int receive(void);
-
-    /** Read from an I2C master.
-     *
-     *  @param data pointer to the byte array to read data in to
-     *  @param length maximum number of bytes to read
-     *
-     *  @returns
-     *       0 on success,
-     *   non-0 otherwise
-     */
-    int read(char *data, int length);
-
-    /** Read a single byte from an I2C master.
-     *
-     *  @returns
-     *    the byte read
-     */
-    int read(void);
-
-    /** Write to an I2C master.
-     *
-     *  @param data pointer to the byte array to be transmitted
-     *  @param length the number of bytes to transmite
-     *
-     *  @returns
-     *       0 on success,
-     *   non-0 otherwise
-     */
-    int write(const char *data, int length);
-
-    /** Write a single byte to an I2C master.
-     *
-     *  @data the byte to write
-     *
-     *  @returns
-     *    '1' if an ACK was received,
-     *    '0' otherwise
-     */
-    int write(int data);
-
-    /** Sets the I2C slave address.
-     *
-     *  @param address The address to set for the slave (ignoring the least
-     *  signifcant bit). If set to 0, the slave will only respond to the
-     *  general call address.
-     */
-    void address(int address);
-
-    /** Reset the I2C slave back into the known ready receiving state.
-     */
-    void stop(void);
-
-protected:
-    i2c_t _i2c;
-};
-
-} // namespace mbed
-
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ *     char buf[10];
+ *     char msg[] = "Slave!";
+ *
+ *     slave.address(0xA0);
+ *     while (1) {
+ *         int i = slave.receive();
+ *         switch (i) {
+ *             case I2CSlave::ReadAddressed:
+ *                 slave.write(msg, strlen(msg) + 1); // Includes null char
+ *                 break;
+ *             case I2CSlave::WriteGeneral:
+ *                 slave.read(buf, 10);
+ *                 printf("Read G: %s\n", buf);
+ *                 break;
+ *             case I2CSlave::WriteAddressed:
+ *                 slave.read(buf, 10);
+ *                 printf("Read A: %s\n", buf);
+ *                 break;
+ *         }
+ *         for(int i = 0; i < 10; i++) buf[i] = 0;    // Clear buffer
+ *     }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+    enum RxStatus {
+        NoData         = 0,
+        ReadAddressed  = 1,
+        WriteGeneral   = 2,
+        WriteAddressed = 3
+    };
+
+    /** Create an I2C Slave interface, connected to the specified pins.
+     *
+     *  @param sda I2C data line pin
+     *  @param scl I2C clock line pin
+     */
+    I2CSlave(PinName sda, PinName scl);
+
+    /** Set the frequency of the I2C interface
+     *
+     *  @param hz The bus frequency in hertz
+     */
+    void frequency(int hz);
+
+    /** Checks to see if this I2C Slave has been addressed.
+     *
+     *  @returns
+     *  A status indicating if the device has been addressed, and how
+     *  - NoData            - the slave has not been addressed
+     *  - ReadAddressed     - the master has requested a read from this slave
+     *  - WriteAddressed    - the master is writing to this slave
+     *  - WriteGeneral      - the master is writing to all slave
+     */
+    int receive(void);
+
+    /** Read from an I2C master.
+     *
+     *  @param data pointer to the byte array to read data in to
+     *  @param length maximum number of bytes to read
+     *
+     *  @returns
+     *       0 on success,
+     *   non-0 otherwise
+     */
+    int read(char *data, int length);
+
+    /** Read a single byte from an I2C master.
+     *
+     *  @returns
+     *    the byte read
+     */
+    int read(void);
+
+    /** Write to an I2C master.
+     *
+     *  @param data pointer to the byte array to be transmitted
+     *  @param length the number of bytes to transmite
+     *
+     *  @returns
+     *       0 on success,
+     *   non-0 otherwise
+     */
+    int write(const char *data, int length);
+
+    /** Write a single byte to an I2C master.
+     *
+     *  @data the byte to write
+     *
+     *  @returns
+     *    '1' if an ACK was received,
+     *    '0' otherwise
+     */
+    int write(int data);
+
+    /** Sets the I2C slave address.
+     *
+     *  @param address The address to set for the slave (ignoring the least
+     *  signifcant bit). If set to 0, the slave will only respond to the
+     *  general call address.
+     */
+    void address(int address);
+
+    /** Reset the I2C slave back into the known ready receiving state.
+     */
+    void stop(void);
+
+protected:
+    i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif