buffered-serial for use with MBED's main USB serial interface (UART0).
Fork of buffered-serial1 by
buffered_serial.cpp
- Committer:
- jrj
- Date:
- 2013-06-10
- Revision:
- 5:8daa0697fa7f
- Parent:
- 2:8ccf9bb8dc65
File content as of revision 5:8daa0697fa7f:
#include "buffered_serial.h" BufferedSerial::BufferedSerial(PinName tx, PinName rx) : Serial(tx,rx), led1(LED1), led2(LED2), rx_sem(0), tx_sem(0) { tx_in=0; tx_out=0; rx_in=0; rx_out=0; device_irqn = UART0_IRQn; // attach the interrupts Serial::attach(this, &BufferedSerial::Rx_interrupt, Serial::RxIrq); Serial::attach(this, &BufferedSerial::Tx_interrupt, Serial::TxIrq); } // Copy tx line buffer to large tx buffer for tx interrupt routine void BufferedSerial::send_line(char *c) { int i; char temp_char; bool empty; i = 0; strncpy(tx_line,c,LINE_SIZE); // Start Critical Section - don't interrupt while changing global buffer variables NVIC_DisableIRQ(device_irqn); empty = (tx_in == tx_out); while ((i==0) || (tx_line[i-1] != '\n')) { // Wait if buffer full if (IS_TX_FULL) { // End Critical Section - need to let interrupt routine empty buffer by sending NVIC_EnableIRQ(device_irqn); //while (IS_TX_FULL) ; // buffer is full tx_sem.wait(); // Start Critical Section - don't interrupt while changing global buffer variables NVIC_DisableIRQ(device_irqn); } tx_buffer[tx_in] = tx_line[i]; i++; tx_in = NEXT(tx_in); } if (Serial::writeable() && (empty)) { temp_char = tx_buffer[tx_out]; tx_out = NEXT(tx_out); // Send first character to start tx interrupts, if stopped LPC_UART0->THR = temp_char; } // End Critical Section NVIC_EnableIRQ(device_irqn); } // Read a line from the large rx buffer from rx interrupt routine void BufferedSerial::read_line(char *c) { int i; i = 0; // Start Critical Section - don't interrupt while changing global buffer variables NVIC_DisableIRQ(device_irqn); // Loop reading rx buffer characters until end of line character while ((i==0) || (rx_line[i-1] != '\n')) { // Wait if buffer empty if (IS_RX_EMPTY) { // buffer empty // End Critical Section - need to allow rx interrupt to get new characters for buffer NVIC_EnableIRQ(device_irqn); //while (rx_in == rx_out) ; // buffer empty rx_sem.wait(); // Start Critical Section - don't interrupt while changing global buffer variables NVIC_DisableIRQ(device_irqn); } else { rx_sem.wait(); } rx_line[i] = rx_buffer[rx_out]; i++; rx_out = NEXT(rx_out); // prevent overflow on rx_line if(i == LINE_SIZE) { i--; break; } } rx_line[i++] = 0; // End Critical Section NVIC_EnableIRQ(device_irqn); strncpy(c,rx_line,i); } // Interupt Routine to read in data from serial port void BufferedSerial::Rx_interrupt() { uint32_t IRR0= LPC_UART0->IIR; led1=1; while (readable() && !(IS_RX_FULL)) { rx_buffer[rx_in] = LPC_UART0->RBR; rx_in = NEXT(rx_in); rx_sem.release(); } led1=0; } // Interupt Routine to write out data to serial port void BufferedSerial::Tx_interrupt() { uint32_t IRR = LPC_UART0->IIR; led2=1; while ((writeable()) && (tx_in != tx_out)) { // while serial is writeable and there are still characters in the buffer LPC_UART0->THR = tx_buffer[tx_out]; // send the character tx_out = NEXT(tx_out); } if(!IS_TX_FULL) // if not full tx_sem.release(); led2=0; }