Igor Skochinsky / Mbed 2 deprecated DriverLibrary

NXP's driver library for LPC17xx, ported to mbed's online compiler. Not tested! I had to fix a lot of warings and found a couple of pretty obvious bugs, so the chances are there are more. Original: http://ics.nxp.com/support/documents/microcontrollers/zip/lpc17xx.cmsis.driver.library.zip

Dependencies:   mbed

Embed: (wiki syntax)

« Back to documentation index

RTC_Public_Functions
Functions

RTC_Public_Functions
[RTC]

Functions

void RTC_Init (LPC_RTC_TypeDef *RTCx)
 Initializes the RTC peripheral.
void RTC_DeInit (LPC_RTC_TypeDef *RTCx)
 De-initializes the RTC peripheral registers to their default reset values.
void RTC_ResetClockTickCounter (LPC_RTC_TypeDef *RTCx)
 Reset clock tick counter in RTC peripheral.
void RTC_Cmd (LPC_RTC_TypeDef *RTCx, FunctionalState NewState)
 Start/Stop RTC peripheral.
void RTC_CntIncrIntConfig (LPC_RTC_TypeDef *RTCx, uint32_t CntIncrIntType,\FunctionalState NewState)
 Enable/Disable Counter increment interrupt for each time type in RTC peripheral.
void RTC_AlarmIntConfig (LPC_RTC_TypeDef *RTCx, uint32_t AlarmTimeType,\FunctionalState NewState)
 Enable/Disable Alarm interrupt for each time type in RTC peripheral.
void RTC_SetTime (LPC_RTC_TypeDef *RTCx, uint32_t Timetype, uint32_t TimeValue)
 Set current time value for each time type in RTC peripheral.
uint32_t RTC_GetTime (LPC_RTC_TypeDef *RTCx, uint32_t Timetype)
 Get current time value for each type time type.
void RTC_SetFullTime (LPC_RTC_TypeDef *RTCx, RTC_TIME_Type *pFullTime)
 Set full of time in RTC peripheral.
void RTC_GetFullTime (LPC_RTC_TypeDef *RTCx, RTC_TIME_Type *pFullTime)
 Get full of time in RTC peripheral.
void RTC_SetAlarmTime (LPC_RTC_TypeDef *RTCx, uint32_t Timetype, uint32_t ALValue)
 Set alarm time value for each time type.
uint32_t RTC_GetAlarmTime (LPC_RTC_TypeDef *RTCx, uint32_t Timetype)
 Get alarm time value for each time type.
void RTC_SetFullAlarmTime (LPC_RTC_TypeDef *RTCx, RTC_TIME_Type *pFullTime)
 Set full of alarm time in RTC peripheral.
void RTC_GetFullAlarmTime (LPC_RTC_TypeDef *RTCx, RTC_TIME_Type *pFullTime)
 Get full of alarm time in RTC peripheral.
IntStatus RTC_GetIntPending (LPC_RTC_TypeDef *RTCx, uint32_t IntType)
 Check whether if specified Location interrupt in RTC peripheral is set or not.
void RTC_ClearIntPending (LPC_RTC_TypeDef *RTCx, uint32_t IntType)
 Clear specified Location interrupt pending in RTC peripheral.
void RTC_CalibCounterCmd (LPC_RTC_TypeDef *RTCx, FunctionalState NewState)
 Enable/Disable calibration counter in RTC peripheral.
void RTC_CalibConfig (LPC_RTC_TypeDef *RTCx, uint32_t CalibValue, uint8_t CalibDir)
 Configures Calibration in RTC peripheral.
void RTC_WriteGPREG (LPC_RTC_TypeDef *RTCx, uint8_t Channel, uint32_t Value)
 Write value to General purpose registers.
uint32_t RTC_ReadGPREG (LPC_RTC_TypeDef *RTCx, uint8_t Channel)
 Read value from General purpose registers.

Function Documentation

void RTC_AlarmIntConfig ( LPC_RTC_TypeDef *  RTCx,
uint32_t  AlarmTimeType,
\FunctionalState  NewState 
)

Enable/Disable Alarm interrupt for each time type in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]AlarmTimeType,:Alarm Time Interrupt type, an matching of this type value below with current time in RTC will generates an interrupt, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
[in]NewStateNew State of this function, should be:

  • ENABLE: Alarm interrupt for this time type are enabled
  • DISABLE: Alarm interrupt for this time type are disabled
Returns:
None

Definition at line 236 of file lpc17xx_rtc.c.

void RTC_CalibConfig ( LPC_RTC_TypeDef *  RTCx,
uint32_t  CalibValue,
uint8_t  CalibDir 
)

Configures Calibration in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]CalibValueCalibration value, should be in range from 0 to 131,072
[in]CalibDirCalibration Direction, should be:

  • RTC_CALIB_DIR_FORWARD: Forward calibration
  • RTC_CALIB_DIR_BACKWARD: Backward calibration
Returns:
None

Definition at line 701 of file lpc17xx_rtc.c.

void RTC_CalibCounterCmd ( LPC_RTC_TypeDef *  RTCx,
FunctionalState  NewState 
)

Enable/Disable calibration counter in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]NewStateNew State of this function, should be:

  • ENABLE: The calibration counter is enabled and counting
  • DISABLE: The calibration counter is disabled and reset to zero
Returns:
None

Definition at line 675 of file lpc17xx_rtc.c.

void RTC_ClearIntPending ( LPC_RTC_TypeDef *  RTCx,
uint32_t  IntType 
)

Clear specified Location interrupt pending in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]IntTypeInterrupt location type, should be:

  • RTC_INT_COUNTER_INCREASE: Clear Counter Increment Interrupt pending.
  • RTC_INT_ALARM: Clear alarm interrupt pending
Returns:
None

Definition at line 659 of file lpc17xx_rtc.c.

void RTC_Cmd ( LPC_RTC_TypeDef *  RTCx,
FunctionalState  NewState 
)

Start/Stop RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]NewStateNew State of this function, should be:

  • ENABLE: The time counters are enabled
  • DISABLE: The time counters are disabled
Returns:
None

Definition at line 106 of file lpc17xx_rtc.c.

void RTC_CntIncrIntConfig ( LPC_RTC_TypeDef *  RTCx,
uint32_t  CntIncrIntType,
\FunctionalState  NewState 
)

Enable/Disable Counter increment interrupt for each time type in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]CntIncrIntType,:Counter Increment Interrupt type, an increment of this type value below will generates an interrupt, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
[in]NewStateNew State of this function, should be:

  • ENABLE: Counter Increment interrupt for this time type are enabled
  • DISABLE: Counter Increment interrupt for this time type are disabled
Returns:
None

Definition at line 144 of file lpc17xx_rtc.c.

void RTC_DeInit ( LPC_RTC_TypeDef *  RTCx )

De-initializes the RTC peripheral registers to their default reset values.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
Returns:
None

Definition at line 76 of file lpc17xx_rtc.c.

uint32_t RTC_GetAlarmTime ( LPC_RTC_TypeDef *  RTCx,
uint32_t  Timetype 
)

Get alarm time value for each time type.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]Timetype,:Time Type, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
Returns:
Value of Alarm time according to specified time type

Definition at line 558 of file lpc17xx_rtc.c.

void RTC_GetFullAlarmTime ( LPC_RTC_TypeDef *  RTCx,
RTC_TIME_Type *  pFullTime 
)

Get full of alarm time in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]pFullTimePointer to a RTC_TIME_Type structure that will be stored alarm time in full.
Returns:
None

Definition at line 613 of file lpc17xx_rtc.c.

void RTC_GetFullTime ( LPC_RTC_TypeDef *  RTCx,
RTC_TIME_Type *  pFullTime 
)

Get full of time in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]pFullTimePointer to a RTC_TIME_Type structure that will be stored time in full.
Returns:
None

Definition at line 453 of file lpc17xx_rtc.c.

IntStatus RTC_GetIntPending ( LPC_RTC_TypeDef *  RTCx,
uint32_t  IntType 
)

Check whether if specified Location interrupt in RTC peripheral is set or not.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]IntTypeInterrupt location type, should be:

  • RTC_INT_COUNTER_INCREASE: Counter Increment Interrupt block generated an interrupt.
  • RTC_INT_ALARM: Alarm generated an interrupt.
Returns:
New state of specified Location interrupt in RTC peripheral (SET or RESET)

Definition at line 640 of file lpc17xx_rtc.c.

uint32_t RTC_GetTime ( LPC_RTC_TypeDef *  RTCx,
uint32_t  Timetype 
)

Get current time value for each type time type.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]Timetype,:Time Type, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
Returns:
Value of time according to specified time type

Definition at line 395 of file lpc17xx_rtc.c.

void RTC_Init ( LPC_RTC_TypeDef *  RTCx )

Initializes the RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
Returns:
None

Definition at line 54 of file lpc17xx_rtc.c.

uint32_t RTC_ReadGPREG ( LPC_RTC_TypeDef *  RTCx,
uint8_t  Channel 
)

Read value from General purpose registers.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]ChannelGeneral purpose registers Channel number, should be in range from 0 to 4.
Returns:
Read Value Note: These General purpose registers can be used to store important information when the main power supply is off. The value in these registers is not affected by chip reset.

Definition at line 746 of file lpc17xx_rtc.c.

void RTC_ResetClockTickCounter ( LPC_RTC_TypeDef *  RTCx )

Reset clock tick counter in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
Returns:
None

Definition at line 90 of file lpc17xx_rtc.c.

void RTC_SetAlarmTime ( LPC_RTC_TypeDef *  RTCx,
uint32_t  Timetype,
uint32_t  ALValue 
)

Set alarm time value for each time type.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]Timetype,:Time Type, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
[in]ALValueAlarm time value to set
Returns:
None

Definition at line 483 of file lpc17xx_rtc.c.

void RTC_SetFullAlarmTime ( LPC_RTC_TypeDef *  RTCx,
RTC_TIME_Type *  pFullTime 
)

Set full of alarm time in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]pFullTimePointer to a RTC_TIME_Type structure that contains alarm time value in full.
Returns:
None

Definition at line 591 of file lpc17xx_rtc.c.

void RTC_SetFullTime ( LPC_RTC_TypeDef *  RTCx,
RTC_TIME_Type *  pFullTime 
)

Set full of time in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]pFullTimePointer to a RTC_TIME_Type structure that contains time value in full.
Returns:
None

Definition at line 431 of file lpc17xx_rtc.c.

void RTC_SetTime ( LPC_RTC_TypeDef *  RTCx,
uint32_t  Timetype,
uint32_t  TimeValue 
)

Set current time value for each time type in RTC peripheral.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]Timetype,:Time Type, should be:

  • RTC_TIMETYPE_SECOND
  • RTC_TIMETYPE_MINUTE
  • RTC_TIMETYPE_HOUR
  • RTC_TIMETYPE_DAYOFWEEK
  • RTC_TIMETYPE_DAYOFMONTH
  • RTC_TIMETYPE_DAYOFYEAR
  • RTC_TIMETYPE_MONTH
  • RTC_TIMETYPE_YEAR
[in]TimeValueTime value to set
Returns:
None

Definition at line 321 of file lpc17xx_rtc.c.

void RTC_WriteGPREG ( LPC_RTC_TypeDef *  RTCx,
uint8_t  Channel,
uint32_t  Value 
)

Write value to General purpose registers.

Parameters:
[in]RTCxRTC peripheral selected, should be RTC
[in]ChannelGeneral purpose registers Channel number, should be in range from 0 to 4.
[in]ValueValue to write
Returns:
None Note: These General purpose registers can be used to store important information when the main power supply is off. The value in these registers is not affected by chip reset.

Definition at line 723 of file lpc17xx_rtc.c.

Generated on Tue Jul 12 2022 17:06:03 by  doxygen 1.7.2