Port from Avnet's Internet Of Things full WiGo demo: SmartConfig - WebServer - Exosite - Android sensor Fusion App

Dependencies:   NVIC_set_all_priorities mbed cc3000_hostdriver_mbedsocket TEMT6200 TSI Wi-Go_eCompass_Lib_V3 WiGo_BattCharger

Wi-Go Reference Design Overview


For additional information on Wi-Go, please visit http://www.em.avnet.com/wi-go
For additional information on Freescale eCompass, please visit
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=E-Compass
Ported from Avnet's Wi-Go KEIL code.
Special thanks to Jim Carver from Avnet for providing the Wi-Go board and for his assistance.


Multiple Wi-Fi applications are provided within the latest version of Wi-Go software:

  • SmartConfig App for auto-setup of Wi-Go network parameters.
  • WebServer display of live sensor data.
  • Exosite portal sensor data feed by Wi-Go.
  • Freescale's Sensor Fusion App data feed by Wi-Go.

Wi-Go is intended for "untethered" portable operation (using it's high-capacity Lithium-Polymer battery). The serial terminal text interface is only required for initial setup, thereafter selection of an application from those available is via finger position on the Touch Slider during the initial 6 second startup period.

Running the Wi-Go Demo Suite

Warning

The on-board Firmware must be updated to mbed enable a Wi-Go system.
Goto the Component page to get the FirmwareUpdate tool (scroll down to the FirmwareUpdate topic).

MAG3110 sensor and eCompass Calibration!

As with the other sensor applications, the eCompass function requires quality calibration data to achieve best accuracy.
For the first 15 seconds after power-up it is recommended that "Figure 8" movements with Wi-Go be done in a smooth, repetitive pattern. Don't touch the slider pad during calibration.

Startup
The RGB LED blinks in a GREEN-ORANGE sequence to inform the user the module is waiting for input.
The RGB LED color designates which of the following Apps to launch.

RGB LED ColorApplication to Launch
OrangeErase all wireless profiles
PurpleSmartConfig
BlueWebServer
RedExosite Data Client
GreenAndroid Server

Swipe your index finger across the slider pad, the RGB LED color will change at approximately 20% intervals.
Removing your finger latches the last color displayed. After about 3 seconds, the selected app will start.
Another app can be selected when the slider pad is touched again within the 3 seconds timeout.

After launch of Exosite or Android Server Apps, the eCompass function then controls the RGB LED.
(not in WebServer mode where RGB LEDs are manually controlled by the User).

RGB LED ColorDirection Indication
BlueNear to North
GreenNorth
RedEast / West
PurpleSouth

__Note!__ The D1, D2 and D3 User LEDs on Wi-Go adhere to the following convention for the different Apps

User LED#Description of function controlling the LED
D1is the board heartbeat, derived from the timer interrupt
D2indicates network activity as follows:
Web Server Wi-Go webpage is being served.
Exosite Client Wi-Go is sending data.
Android App Wi-Go is sending data
D3WLAN Network is Connected

Detail of Wi-Go Applications

App #1: SmartConfig
See TI's pages on how to use the SmartConfig tool:

  • Preferred method : Configuration using the SmartConfig tool
  • SmartConfig download: Smart Config and Home Automation
    • iOS app : available at Apple app store.
    • Android app : download and install the Android SmartConfig Application on a PC.
      This file contains the source code as well as the compiled APK file.
      The APK file is stored in ti\CC3000AndroidApp\SmartConfigCC3X\bin.

App #2: WebServer display of live sensor data
__Note!__
When using the WebServer for the first time on a Wi-Fi network you will need to determine the IP address that's assigned to Wi-Go by the DHCP Server. To do this, it is recommended you use one of the following two methods:

  • While Wi-Go is initially tethered to a laptop via USB, launch of the WebServer Application and note the IP address that is reported on the terminal screen immediately after selection of this App.
  • Alternatively, use a 3rd party LAN SCAN type tool to view Wi-Go's IP address.
    eg. FING, - available for free download from Google Play or iTunes App Stores…

Wi-Go's WebServer Application is selected as follows:

  • Press RESET, followed by the eCompass Calibration (mentioned at the top of this page).
    Then use index finger on slider to select the WebServer App (RGB LED = BLUE).
    At end of the 3 second selection period the WebServer App shall launch.
  • If you are tethered to a laptop and have a terminal open the Wi-Fi network connection confirmation will be seen, eg.

'*** Wi-Go board DHCP assigned IP Address = 192.168.43.102
  • Once you have noted Wi-Go's reported IP address, the USB cable may be disconnected and Wi-Go then used as intended, running on it's own battery power.
  • Use an Internet Browser on SmartPhone/Tablet/Laptop (connected to same Hot-Spot/Wireless Router subnet), to now connect to the noted Wi-Go IP address and view the WebServer output: /media/uploads/frankvnk/wi-go_webserver.png
  • the Webserver sensor data is auto-updated every 2 seconds a manual refresh (F5 on laptop).
  • In the event of an error, press refresh to regenerate the screen.
  • Use the mouse (or touch-screen) to exercise the RGB LED output.

App #3: Exosite Data Client
Wi-Go's sensor data gets transmitted via Wi-Fi to a cloud-based Exosite portal where the sensor measurements are displayed graphically on a "dashboard". Users can create unique customized dashboards using drag and drop GUI widgets from the library provided on the Exosite website.
__Note!__ For the Exosite application a "live" connection to the Internet is required !!!

  • Press RESET, followed by the eCompass Calibration (mentioned at the top of this page).
    Then use index finger on slider to select the Exosite Client App (RGB LED = RED)
  • On launching this App, note Wi-Go's MAC address displayed on your terminal
    (if not running a terminal use FING or other WLAN Scan tool to determine Wi-Go's MAC address) /media/uploads/frankvnk/mac_address.png
  • Using your computer's internet browser, go to avnet.exosite.com and sign-up for a free Avnet Trial Exosite Account: /media/uploads/frankvnk/avnet_trial_exosite.png
  • On the next screen, click on the Sign-Up Now button in the displayed Avnet Trial account option.
  • Complete the Account Info and Contact Info then click on Create Account (make sure to use a valid email address!).
  • Check for new incoming email from avnet.exosite.com to the address you provided and click on the link in this email to activate your new Exosite account.
  • Once activated, login using the email address and password that you chose in your registration. Your Exosite Portal and Dashboard should now display. The first time you log-in to your new account, the default Home dashboard will be displayed, pre-configured with two widgets. On the left is the Welcome widget for tips and information. On the right is the Device List widget.
    Dashboards are configurable, so at any time this default dashboard can be changed, widgets deleted and added (Clicking the upside-down triangle icon in a widget's Title bar will allow you to edit it).
  • Before going further with the Dashboard, you need to connect your Wi-Go device to your Exosite account. Do this by going to the left sidebar and selecting Devices followed by selecting the +Add Device link (on right of screen). /media/uploads/frankvnk/add_device.png
  • In the Setup screens that follow, enter the following
Select a supported deviceWi-Go
Enter device MAC Addressnn:nn:nn:nn:nn:nn [your Wi-Go's MAC address including colons]
Enter device Name[choose a descriptive name]
Enter device Location[description of your location]
  • Once completed, under Devices the name chosen for the added Wi-Go device should now be listed.
  • Click on this new Wi-Go device to examine (and edit if necessary) it's Device Information screen.
    /media/uploads/frankvnk/device_information.png
  • Click the CLOSE button to exit the Device Information screen.
  • On your Wi-Go kit now press RESET, followed by the eCompass Calibration (mentioned at the top of this page)
    and again select the Exosite Client App (RGB LED = RED) using your index finger.
  • Refresh your browser (press F5) a couple've times until the Active indicator changes to On (Green).
    /media/uploads/frankvnk/active_indicator.png
  • From the left sidebar click on Home and click on the recently named Wi-Go device which is located under the Device List.
    This will bring-up a default dashboard display similar to what's shown below.
    (Dashboards are typically accessed via the Dashboards menu entry). Check the dashboard is updating with live data by moving your Wi-Go Kit through different orientations.
    /media/uploads/frankvnk/dashboard.png
  • To create a custom dashboard, select Dashboards from the sidebar menu, followed by +Add Dashboard (on right side of Your Dashboards title bar). After completion of the initial configuration screen you will then be able to add Widgets to display the various Wi-Go data sources as well as pictures and text to support your application.
  • More guidance on the creation, editing and sharing of custom dashboards is available under the Exosite support pages

App #4: Android Sensor Fusion App

  • Press RESET, followed by the eCompass Calibration (mentioned at the top of this page)
    , then use index finger on slider to select the Android App (RGB LED = GREEN)
  • Freescale's ''Xtrinsic Sensor Fusion Toolbox'" will run on Android 3.0 or above phone or tablet. Free to download from Google Play, type Sensor fusion in the search box to find it. freescale.sensors.sfusion /media/uploads/frankvnk/sensor_fusion_toolbox.png
  • The Freescale App is well documented. To access the built-in documentation, press the NAV button at top of screen followed by Documentation from the scroll-down menu:
    /media/uploads/frankvnk/sensor_fusion_doc.png
  • Freescale's sensors site provides additional resources such as this overview: free-android-app-teaches-sensor-fusion-basics
  • Go to the Options Menu and select Preferences… /media/uploads/frankvnk/sensor_fusion_preferences.png
  • The following items need to be taken care of:
Enter WiGo's IP address
Enter the SSID (of the Hot-Spot or Wireless Access Point used by Wi-Go)
  • Press Save and Exit!
    /media/uploads/frankvnk/sensor_fusion_save_and_exit.png
  • Exit the Application completely then re-launch the Sensor Fusion Application.
  • Select the ''Source/Algorithm'" menu and change the data source to Wi-Go mag/accel /media/uploads/frankvnk/sensor_fusion_wigo_mag_accel.png
  • The Android App should now be displaying a 3-D image of Wi-Go that you can rotate and flip-over by moving the Wi-Go board accordingly…
  • Use NAV > Device View to display if this view does not come-up by default. /media/uploads/frankvnk/sensor_fusion_nav_device_view.png
  • A Serial Terminal connection is not necessary but if you happen to have one open you should see the following messages as Wi-Go connects to the Android App:
    "Server waiting for connection" followed by
    "connected, transmit buffer size= 96", and then
    "input = 0123456789"
    at which time Wi-Go starts streaming data to the Android App.
Revision:
1:99bfc8d68fd3
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cc3000_hostdriver_mbedsocket/cc3000_event.cpp	Wed Oct 23 12:01:30 2013 +0000
@@ -0,0 +1,669 @@
+/*****************************************************************************
+*
+*  C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
+*  Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
+*  provided help.
+*
+*  This version of "host driver" uses CC3000 Host Driver Implementation. Thus
+*  read the following copyright:
+*
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#include "cc3000.h"
+#include "cc3000_event.h"
+#include "cc3000_netapp.h"
+
+namespace mbed_cc3000 {
+
+#if (CC3000_DEBUG_HCI_RX == 1)
+const char *HCI_EVENT_STR[] =
+{
+    "Socket",
+    "Bind",
+    "Send",
+    "Recv",
+    "Accept",
+    "Listen",
+    "Connect",
+    "BSD Select",
+    "Set Socket Options",
+    "Get Socket Options",
+    "Close Socket",
+    "Unknown",
+    "Recv From",
+    "Write",
+    "Send To",
+    "Get Hostname",
+    "mDNS Advertise"
+};
+
+const char *HCI_NETAPP_STR[] =
+{
+    "DHCP",
+    "Ping Sent",
+    "Ping Report",
+    "Ping Stop",
+    "IP Config",
+    "ARP Flush",
+    "Unknown",
+    "Set Debug level",
+    "Set Timers"
+};
+
+// from 0-7
+const char *HCI_MISC_STR[] =
+{
+    "BASE - Error?",
+    "Connecting",
+    "Disconnect",
+    "Scan Param",
+    "Connect Policy",
+    "Add Profile",
+    "Del Profile",
+    "Get Scan Res",
+    "Event Mask",
+    "Status Req",
+    "Config Start",
+    "Config Stop",
+    "Config Set Prefix",
+    "Config Patch",
+};
+#endif
+
+cc3000_event::cc3000_event(cc3000_simple_link &simplelink, cc3000_hci &hci, cc3000_spi &spi, cc3000 &cc3000)
+    : socket_active_status(SOCKET_STATUS_INIT_VAL), _simple_link(simplelink), _hci(hci), _spi(spi), _cc3000(cc3000) {
+
+}
+
+cc3000_event::~cc3000_event() {
+
+}
+
+/* TODO removed buffer, set it in init */
+void cc3000_event::received_handler(uint8_t *buffer) {
+    _simple_link.set_data_received_flag(1);
+    _simple_link.set_received_data(buffer);
+
+    hci_unsolicited_event_handler();
+}
+
+void cc3000_event::hci_unsol_handle_patch_request(uint8_t *event_hdr) {
+    uint8_t *params = (uint8_t *)(event_hdr) + HCI_EVENT_HEADER_SIZE;
+    uint32_t length = 0;
+    uint8_t *patch;
+
+    switch (*params)
+    {
+        case HCI_EVENT_PATCHES_DRV_REQ:
+        {
+            tDriverPatches func_pointer = (tDriverPatches)_simple_link.get_func_pointer(DRIVER_PATCHES);
+            if (func_pointer)
+            {
+                patch = func_pointer(&length);
+                if (patch)
+                {
+                    _hci.patch_send(HCI_EVENT_PATCHES_DRV_REQ, _simple_link.get_transmit_buffer(), patch, length);
+                    return;
+                }
+            }
+
+            // Send 0 length Patches response event
+            _hci.patch_send(HCI_EVENT_PATCHES_DRV_REQ, _simple_link.get_transmit_buffer(), 0, 0);
+            break;
+        }
+        case HCI_EVENT_PATCHES_FW_REQ:
+        {
+            tFWPatches func_pointer = (tFWPatches)_simple_link.get_func_pointer(FW_PATCHES);
+            if (func_pointer)
+            {
+                patch = func_pointer(&length);
+                // Build and send a patch
+                if (patch)
+                {
+                    _hci.patch_send(HCI_EVENT_PATCHES_FW_REQ, _simple_link.get_transmit_buffer(), patch, length);
+                    return;
+                }
+            }
+            // Send 0 length Patches response event
+            _hci.patch_send(HCI_EVENT_PATCHES_FW_REQ, _simple_link.get_transmit_buffer(), 0, 0);
+            break;
+        }
+        case HCI_EVENT_PATCHES_BOOTLOAD_REQ:
+        {
+            tBootLoaderPatches func_pointer = (tBootLoaderPatches)_simple_link.get_func_pointer(BOOTLOADER_PATCHES);
+            if (func_pointer)
+            {
+                patch = func_pointer(&length);
+                if (patch)
+                {
+                    _hci.patch_send(HCI_EVENT_PATCHES_BOOTLOAD_REQ, _simple_link.get_transmit_buffer(), patch, length);
+                    return;
+                }
+            }
+            // Send 0 length Patches response event
+            _hci.patch_send(HCI_EVENT_PATCHES_BOOTLOAD_REQ, _simple_link.get_transmit_buffer(), 0, 0);
+            break;
+        }
+    }
+}
+
+static void hci_event_debug_print(uint16_t hciEventNo)
+{
+#if (CC3000_DEBUG_HCI_RX == 1)
+    if ((hciEventNo > HCI_CMND_SOCKET_BASE) && ( hciEventNo <= HCI_CMND_MDNS_ADVERTISE))
+    {
+        DBG_HCI("Event Received : 0x%04X - %s", hciEventNo, HCI_EVENT_STR[hciEventNo-HCI_CMND_SOCKET]);
+    }
+    else if ((hciEventNo > HCI_CMND_NETAPP_BASE) && ( hciEventNo <= HCI_NETAPP_SET_TIMERS))
+    {
+        DBG_HCI("Event Received : 0x%04X - %s", hciEventNo, HCI_NETAPP_STR[hciEventNo-HCI_NETAPP_DHCP]);
+    }
+    else if (hciEventNo < HCI_CMND_WLAN_CONFIGURE_PATCH+1)
+    {
+        DBG_HCI("Event Received : 0x%04X - %s", hciEventNo, HCI_MISC_STR[hciEventNo]);
+    }
+    else
+    {
+        DBG_HCI("Event Received : 0x%04X", hciEventNo);
+    }
+#endif
+}
+
+uint8_t *cc3000_event::hci_event_handler(void *ret_param, uint8_t *from, uint8_t *fromlen) {
+    uint8_t *received_data, argument_size;
+    uint16_t length;
+    uint8_t *pucReceivedParams;
+    uint16_t received_op_code = 0;
+    uint32_t return_value;
+    uint8_t * RecvParams;
+    uint8_t *RetParams;
+
+    while (1)
+    {
+        if (_simple_link.get_data_received_flag() != 0)
+        {
+            received_data = _simple_link.get_received_data();
+            if (*received_data == HCI_TYPE_EVNT)
+            {
+                // Event Received
+                STREAM_TO_UINT16((uint8_t *)received_data, HCI_EVENT_OPCODE_OFFSET,received_op_code);
+                pucReceivedParams = received_data + HCI_EVENT_HEADER_SIZE;
+                RecvParams = pucReceivedParams;
+                RetParams = (uint8_t *)ret_param;
+
+                // unsolicited event received - finish handling
+                if (hci_unsol_event_handler((uint8_t *)received_data) == 0)
+                {
+                    STREAM_TO_UINT8(received_data, HCI_DATA_LENGTH_OFFSET, length);
+
+                    hci_event_debug_print( received_op_code );
+
+                    switch(received_op_code)
+                    {
+                    case HCI_CMND_READ_BUFFER_SIZE:
+                        {
+                            uint16_t temp = _simple_link.get_number_free_buffers();
+                            STREAM_TO_UINT8((uint8_t *)pucReceivedParams, 0, temp);
+                            _simple_link.set_number_free_buffers(temp);
+
+                            temp = _simple_link.get_buffer_length();
+                            STREAM_TO_UINT16((uint8_t *)pucReceivedParams, 1, temp);
+                            _simple_link.set_buffer_length(temp);
+                        }
+                        break;
+
+                    case HCI_CMND_WLAN_CONFIGURE_PATCH:
+                    case HCI_NETAPP_DHCP:
+                    case HCI_NETAPP_PING_SEND:
+                    case HCI_NETAPP_PING_STOP:
+                    case HCI_NETAPP_ARP_FLUSH:
+                    case HCI_NETAPP_SET_DEBUG_LEVEL:
+                    case HCI_NETAPP_SET_TIMERS:
+                    case HCI_EVNT_NVMEM_READ:
+                    case HCI_EVNT_NVMEM_CREATE_ENTRY:
+                    case HCI_CMND_NVMEM_WRITE_PATCH:
+                    case HCI_NETAPP_PING_REPORT:
+                    case HCI_EVNT_MDNS_ADVERTISE:
+
+                        STREAM_TO_UINT8(received_data, HCI_EVENT_STATUS_OFFSET, *(uint8_t *)ret_param);
+                        break;
+
+                    case HCI_CMND_SETSOCKOPT:
+                    case HCI_CMND_WLAN_CONNECT:
+                    case HCI_CMND_WLAN_IOCTL_STATUSGET:
+                    case HCI_EVNT_WLAN_IOCTL_ADD_PROFILE:
+                    case HCI_CMND_WLAN_IOCTL_DEL_PROFILE:
+                    case HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY:
+                    case HCI_CMND_WLAN_IOCTL_SET_SCANPARAM:
+                    case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START:
+                    case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP:
+                    case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX:
+                    case HCI_CMND_EVENT_MASK:
+                    case HCI_EVNT_WLAN_DISCONNECT:
+                    case HCI_EVNT_SOCKET:
+                    case HCI_EVNT_BIND:
+                    case HCI_CMND_LISTEN:
+                    case HCI_EVNT_CLOSE_SOCKET:
+                    case HCI_EVNT_CONNECT:
+                    case HCI_EVNT_NVMEM_WRITE:
+
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,0, *(uint32_t *)ret_param);
+                        break;
+
+                    case HCI_EVNT_READ_SP_VERSION:
+
+                        STREAM_TO_UINT8(received_data, HCI_EVENT_STATUS_OFFSET, *(uint8_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 1;
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams, 0, return_value);
+                        UINT32_TO_STREAM((uint8_t *)ret_param, return_value);
+                        break;
+
+                    case HCI_EVNT_BSD_GETHOSTBYNAME:
+
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_HOST_BY_NAME_RETVAL_OFFSET,*(uint32_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 4;
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_HOST_BY_NAME_ADDR_OFFSET,*(uint32_t *)ret_param);
+                        break;
+
+                    case HCI_EVNT_ACCEPT:
+                        {
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,ACCEPT_SD_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,ACCEPT_RETURN_STATUS_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+
+                            //This argument returns in network order
+                            memcpy((uint8_t *)ret_param, pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));
+                            break;
+                        }
+
+                    case HCI_EVNT_RECV:
+                    case HCI_EVNT_RECVFROM:
+                        {
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(uint32_t *)ret_param);
+
+                            if(((tBsdReadReturnParams *)ret_param)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
+                            {
+                                set_socket_active_status(((tBsdReadReturnParams *)ret_param)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
+                            }
+                            break;
+                        }
+
+                    case HCI_EVNT_SEND:
+                    case HCI_EVNT_SENDTO:
+                        {
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+
+                            break;
+                        }
+
+                    case HCI_EVNT_SELECT:
+                        {
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_STATUS_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_READFD_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(uint32_t *)ret_param);
+                            ret_param = ((uint8_t *)ret_param) + 4;
+                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_EXFD_OFFSET,*(uint32_t *)ret_param);
+                            break;
+                        }
+
+                    case HCI_CMND_GETSOCKOPT:
+
+                        STREAM_TO_UINT8(received_data, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)ret_param)->iStatus);
+                        //This argument returns in network order
+                        memcpy((uint8_t *)ret_param, pucReceivedParams, 4);
+                        break;
+
+                    case HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS:
+
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_SCAN_RESULTS_TABlE_COUNT_OFFSET,*(uint32_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 4;
+                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_SCAN_RESULTS_SCANRESULT_STATUS_OFFSET,*(uint32_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 4;
+                        STREAM_TO_UINT16((uint8_t *)pucReceivedParams,GET_SCAN_RESULTS_ISVALID_TO_SSIDLEN_OFFSET,*(uint32_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 2;
+                        STREAM_TO_UINT16((uint8_t *)pucReceivedParams,GET_SCAN_RESULTS_FRAME_TIME_OFFSET,*(uint32_t *)ret_param);
+                        ret_param = ((uint8_t *)ret_param) + 2;
+                        memcpy((uint8_t *)ret_param, (uint8_t *)(pucReceivedParams + GET_SCAN_RESULTS_FRAME_TIME_OFFSET + 2), GET_SCAN_RESULTS_SSID_MAC_LENGTH);
+                        break;
+
+                    case HCI_CMND_SIMPLE_LINK_START:
+                        break;
+
+                    case HCI_NETAPP_IPCONFIG:
+
+                        //Read IP address
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
+                        RecvParams += 4;
+
+                        //Read subnet
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
+                        RecvParams += 4;
+
+                        //Read default GW
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
+                        RecvParams += 4;
+
+                        //Read DHCP server
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
+                        RecvParams += 4;
+
+                        //Read DNS server
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
+                        RecvParams += 4;
+
+                        //Read Mac address
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_MAC_LENGTH);
+                        RecvParams += 6;
+
+                        //Read SSID
+                        STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_SSID_LENGTH);
+                        break;
+
+                    default :
+                        DBG_HCI("UNKNOWN Event Received : 0x%04X ", received_op_code);
+                        break;
+                    }
+
+                }
+                if (received_op_code == _simple_link.get_op_code())
+                {
+                    _simple_link.set_op_code(0);
+                }
+            }
+            else
+            {
+                pucReceivedParams = received_data;
+                STREAM_TO_UINT8((uint8_t *)received_data, HCI_PACKET_ARGSIZE_OFFSET, argument_size);
+
+                STREAM_TO_UINT16((uint8_t *)received_data, HCI_PACKET_LENGTH_OFFSET, length);
+
+                // Data received: note that the only case where from and from length
+                // are not null is in recv from, so fill the args accordingly
+                if (from)
+                {
+                    STREAM_TO_UINT32((uint8_t *)(received_data + HCI_DATA_HEADER_SIZE), BSD_RECV_FROM_FROMLEN_OFFSET, *(uint32_t *)fromlen);
+                    memcpy(from, (received_data + HCI_DATA_HEADER_SIZE + BSD_RECV_FROM_FROM_OFFSET) ,*fromlen);
+                }
+
+                memcpy(ret_param, pucReceivedParams + HCI_DATA_HEADER_SIZE + argument_size, length - argument_size);
+
+                _simple_link.set_pending_data(0);
+            }
+
+            _simple_link.set_data_received_flag(0);
+
+            //tWlanInterruptEnable func_pointer = (tWlanInterruptEnable)_simple_link.get_func_pointer(WLAN_INTERRUPT_ENABLE);
+            //func_pointer();
+            _spi.wlan_irq_enable();
+
+            // Since we are going to TX - we need to handle this event after the ResumeSPi since we need interrupts
+            if ((*received_data == HCI_TYPE_EVNT) && (received_op_code == HCI_EVNT_PATCHES_REQ))
+            {
+                hci_unsol_handle_patch_request((uint8_t *)received_data);
+            }
+            if ((_simple_link.get_op_code() == 0) && (_simple_link.get_pending_data() == 0))
+            {
+                return NULL;
+            }
+        }
+    }
+}
+
+int32_t cc3000_event::hci_unsol_event_handler(uint8_t *event_hdr) {
+    uint8_t *data = NULL;
+    int32_t event_type;
+    uint32_t number_of_released_packets;
+    uint32_t number_of_sent_packets;
+
+    STREAM_TO_UINT16(event_hdr, HCI_EVENT_OPCODE_OFFSET,event_type);
+
+    if (event_type & HCI_EVNT_UNSOL_BASE) {
+        switch(event_type) {
+            case HCI_EVNT_DATA_UNSOL_FREE_BUFF:
+            {
+                hci_event_unsol_flowcontrol_handler(event_hdr);
+
+                number_of_released_packets = _simple_link.get_released_packets();
+                number_of_sent_packets = _simple_link.get_sent_packets();
+
+                if (number_of_released_packets == number_of_sent_packets)
+                {
+                    if (_simple_link.get_tx_complete_signal())
+                    {
+                        //tWlanCB func_pointer = (tWlanCB)_simple_link.get_func_pointer(WLAN_CB);
+                        _cc3000.usync_callback(HCI_EVENT_CC3000_CAN_SHUT_DOWN, NULL, 0);
+                    }
+                }
+                return 1;
+            }
+        }
+    }
+
+    if (event_type & HCI_EVNT_WLAN_UNSOL_BASE) {
+        switch(event_type) {
+            case HCI_EVNT_WLAN_KEEPALIVE:
+            case HCI_EVNT_WLAN_UNSOL_CONNECT:
+            case HCI_EVNT_WLAN_UNSOL_DISCONNECT:
+            case HCI_EVNT_WLAN_UNSOL_INIT:
+            case HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE:
+            // {
+                // tWlanCB func_pointer = (tWlanCB)_simple_link.get_func_pointer(WLAN_CB);
+                // if( func_pointer )
+                // {
+                //     func_pointer(event_type, 0, 0);
+                // }
+                _cc3000.usync_callback(event_type, 0, 0);
+                break;
+            // }
+            case HCI_EVNT_WLAN_UNSOL_DHCP:
+            {
+                uint8_t params[NETAPP_IPCONFIG_MAC_OFFSET + 1]; // extra byte is for the status
+                uint8_t *recParams = params;
+                data = (uint8_t *)(event_hdr) + HCI_EVENT_HEADER_SIZE;
+
+                //Read IP address
+                STREAM_TO_STREAM(data,recParams,NETAPP_IPCONFIG_IP_LENGTH);
+                data += 4;
+                //Read subnet
+                STREAM_TO_STREAM(data,recParams,NETAPP_IPCONFIG_IP_LENGTH);
+                data += 4;
+                //Read default GW
+                STREAM_TO_STREAM(data,recParams,NETAPP_IPCONFIG_IP_LENGTH);
+                data += 4;
+                //Read DHCP server
+                STREAM_TO_STREAM(data,recParams,NETAPP_IPCONFIG_IP_LENGTH);
+                data += 4;
+                //Read DNS server
+                STREAM_TO_STREAM(data,recParams,NETAPP_IPCONFIG_IP_LENGTH);
+                // read the status
+                STREAM_TO_UINT8(event_hdr, HCI_EVENT_STATUS_OFFSET, *recParams);
+
+                // tWlanCB func_pointer = (tWlanCB)_simple_link.get_func_pointer(WLAN_CB);
+                // if( func_pointer )
+                // {
+                    _cc3000.usync_callback(event_type, (uint8_t  *)params, sizeof(params));
+                // }
+                break;
+            }
+            case HCI_EVNT_WLAN_ASYNC_PING_REPORT:
+            {
+                netapp_pingreport_args_t params;
+                data = (uint8_t *)(event_hdr) + HCI_EVENT_HEADER_SIZE;
+                STREAM_TO_UINT32(data, NETAPP_PING_PACKETS_SENT_OFFSET, params.packets_sent);
+                STREAM_TO_UINT32(data, NETAPP_PING_PACKETS_RCVD_OFFSET, params.packets_received);
+                STREAM_TO_UINT32(data, NETAPP_PING_MIN_RTT_OFFSET, params.min_round_time);
+                STREAM_TO_UINT32(data, NETAPP_PING_MAX_RTT_OFFSET, params.max_round_time);
+                STREAM_TO_UINT32(data, NETAPP_PING_AVG_RTT_OFFSET, params.avg_round_time);
+
+                // tWlanCB func_pointer = (tWlanCB)_simple_link.get_func_pointer(WLAN_CB);
+                // if (func_pointer)
+                // {
+                    _cc3000.usync_callback(event_type, (uint8_t  *)&params, sizeof(params));
+                // }
+                break;
+            }
+            case HCI_EVNT_BSD_TCP_CLOSE_WAIT:
+            {
+                // tWlanCB func_pointer = (tWlanCB)_simple_link.get_func_pointer(WLAN_CB);
+                // if (func_pointer)
+                // {
+                    _cc3000.usync_callback(event_type, NULL, 0);
+                // }
+                break;
+            }
+
+            //'default' case which means "event not supported"
+            default:
+                return (0);
+        }
+        return(1);
+    }
+
+    if ((event_type == HCI_EVNT_SEND) || (event_type == HCI_EVNT_SENDTO) || (event_type == HCI_EVNT_WRITE)) {
+        uint8_t *pArg;
+        int32_t status;
+        pArg = M_BSD_RESP_PARAMS_OFFSET(event_hdr);
+        STREAM_TO_UINT32(pArg, BSD_RSP_PARAMS_STATUS_OFFSET,status);
+        if (ERROR_SOCKET_INACTIVE == status) {
+            // The only synchronous event that can come from SL device in form of
+            // command complete is "Command Complete" on data sent, in case SL device
+            // was unable to transmit
+            int32_t transmit_error  = _simple_link.get_transmit_error();
+            STREAM_TO_UINT8(event_hdr, HCI_EVENT_STATUS_OFFSET, transmit_error);
+            _simple_link.set_transmit_error(transmit_error);
+            update_socket_active_status(M_BSD_RESP_PARAMS_OFFSET(event_hdr));
+            return (1);
+        }
+        else {
+            return (0);
+        }
+    }
+    return(0);
+}
+
+int32_t cc3000_event::hci_unsolicited_event_handler(void) {
+    uint32_t res = 0;
+    uint8_t *received_data;
+
+    if (_simple_link.get_data_received_flag() != 0) {
+        received_data = (_simple_link.get_received_data());
+
+        if (*received_data == HCI_TYPE_EVNT) {
+            // unsolicited event received - finish handling
+            if (hci_unsol_event_handler((uint8_t *)received_data) == 1) {
+                // An unsolicited event was received:
+                // release the buffer and clean the event received
+                _simple_link.set_data_received_flag(0);
+
+                res = 1;
+                _spi.wlan_irq_enable();
+            }
+        }
+    }
+    return res;
+}
+
+void cc3000_event::set_socket_active_status(int32_t sd, int32_t status) {
+    if (M_IS_VALID_SD(sd) && M_IS_VALID_STATUS(status))
+    {
+        socket_active_status &= ~(1 << sd);      /* clean socket's mask */
+        socket_active_status |= (status << sd); /* set new socket's mask */
+    }
+}
+
+int32_t cc3000_event::hci_event_unsol_flowcontrol_handler(uint8_t *event) {
+    int32_t temp, value;
+    uint16_t i;
+    uint16_t pusNumberOfHandles=0;
+    uint8_t *pReadPayload;
+
+    STREAM_TO_UINT16((uint8_t *)event,HCI_EVENT_HEADER_SIZE,pusNumberOfHandles);
+    pReadPayload = ((uint8_t *)event + HCI_EVENT_HEADER_SIZE + sizeof(pusNumberOfHandles));
+    temp = 0;
+
+    for(i = 0; i < pusNumberOfHandles; i++) {
+        STREAM_TO_UINT16(pReadPayload, FLOW_CONTROL_EVENT_FREE_BUFFS_OFFSET, value);
+        temp += value;
+        pReadPayload += FLOW_CONTROL_EVENT_SIZE;
+    }
+
+    _simple_link.set_number_free_buffers(_simple_link.get_number_free_buffers() + temp);
+    _simple_link.set_number_of_released_packets(_simple_link.get_released_packets() + temp);
+
+    return(ESUCCESS);
+}
+
+int32_t cc3000_event::get_socket_active_status(int32_t sd) {
+    if(M_IS_VALID_SD(sd)) {
+        return (socket_active_status & (1 << sd)) ? SOCKET_STATUS_INACTIVE : SOCKET_STATUS_ACTIVE;
+    } else {
+        return SOCKET_STATUS_INACTIVE;
+    }
+}
+
+void cc3000_event::update_socket_active_status(uint8_t *resp_params) {
+    int32_t status, sd;
+
+    STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_SOCKET_OFFSET,sd);
+    STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_STATUS_OFFSET,status);
+
+    if(ERROR_SOCKET_INACTIVE == status) {
+        set_socket_active_status(sd, SOCKET_STATUS_INACTIVE);
+    }
+}
+
+void cc3000_event::simplelink_wait_event(uint16_t op_code, void *ret_param) {
+    // In the blocking implementation the control to caller will be returned only
+    // after the end of current transaction
+    _simple_link.set_op_code(op_code);
+    hci_event_handler(ret_param, 0, 0);
+}
+
+void cc3000_event::simplelink_wait_data(uint8_t *pBuf, uint8_t *from, uint8_t *fromlen) {
+    // In the blocking implementation the control to caller will be returned only
+    // after the end of current transaction, i.e. only after data will be received
+    _simple_link.set_pending_data(1);
+    hci_event_handler(pBuf, from, fromlen);
+}
+
+
+} /* end of cc3000 namespace */