Frank Vannieuwkerke / Mbed 2 deprecated LPC1768_Mini-DK_EasyWeb_DM9161

LPC1768 Mini-DK EasyWeb application with SPI TFT output. Started from EasyWebCR and modified for DM9161 PHY support.

Dependencies:   Mini-DK mbed

This is a very basic EasyWeb application.

No error checking is performed during initialisation.

Information

If the webpage is not reachable or the 'Webserver running' message does not appear, press the reset button on the Mini-DK and wait until the message 'Webserver running' appears.
This happens sometimes when powering up the Mini-DK because the DM9161 reset pin is NOT controlled by the LPC1768, it is directly connected to the reset button.

IP adress/mask/gateway in tcpip.h : 192.168.0.200 / 255.255.255.0 / 192.168.0.1

MAC address in ethmac.h : 6-5-4-3-2-1

easyweb.h

Committer:
frankvnk
Date:
2013-01-15
Revision:
8:4c3db9231e3f
Parent:
0:636056c0b5e1

File content as of revision 8:4c3db9231e3f:

/******************************************************************
 *****                                                        *****
 *****  Name: easyweb.h                                       *****
 *****  Ver.: 1.0                                             *****
 *****  Date: 17/12/2012                                      *****
 *****  Auth: Frank Vannieuwkerke                             *****
 *****  Func: header-file for easyweb.c                       *****
 *****        Rewrite from Andreas Dannenberg                 *****
 *****                     HTWK Leipzig                       *****
 *****                     university of applied sciences     *****
 *****                     Germany                            *****
 *****                     adannenb@et.htwk-leipzig.de        *****
 *****                                                        *****
 ******************************************************************/

#ifndef __EASYWEB_H
#define __EASYWEB_H

const unsigned char GetResponse[] =              // 1st thing our server sends to a client
{
  "HTTP/1.0 200 OK\r\n"                          // protocol ver 1.0, code 200, reason OK
  "Content-Type: text/html\r\n"                  // type of data we want to send
  "\r\n"                                         // indicate end of HTTP-header
};
void start(void);
void InitOsc(void);                              // prototypes
void InitPorts(void);
void HTTPServer(void);
void InsertDynamicValues(void);
unsigned int GetAD7Val(void);
unsigned int GetTempVal(void);

unsigned char *Pwebsite;                         // pointer to website
unsigned int HTTPBytesToSend;                    // bytes left to send

unsigned char HTTPStatus;                        // status byte 
#define HTTP_SEND_PAGE               0x01        // help flag

#endif