my fork

Dependents:   Nucleo_blueNRG

Fork of mbed by mbed official

Committer:
bogdanm
Date:
Mon May 19 18:14:09 2014 +0100
Revision:
84:0b3ab51c8877
Child:
92:4fc01daae5a5
Release 84 of the mbed library

Main changes:

- added LPC11U68 to the official build
- Bug fixes and new features for ST Nucleo boards
- I2C fixes for Freescale targets
- Added nRF51822 exporters

Who changed what in which revision?

UserRevisionLine numberNew contents of line
bogdanm 84:0b3ab51c8877 1 /**
bogdanm 84:0b3ab51c8877 2 ******************************************************************************
bogdanm 84:0b3ab51c8877 3 * @file stm32l0xx_hal_uart.h
bogdanm 84:0b3ab51c8877 4 * @author MCD Application Team
bogdanm 84:0b3ab51c8877 5 * @version V1.0.0
bogdanm 84:0b3ab51c8877 6 * @date 22-April-2014
bogdanm 84:0b3ab51c8877 7 * @brief Header file of UART HAL module.
bogdanm 84:0b3ab51c8877 8 ******************************************************************************
bogdanm 84:0b3ab51c8877 9 * @attention
bogdanm 84:0b3ab51c8877 10 *
bogdanm 84:0b3ab51c8877 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
bogdanm 84:0b3ab51c8877 12 *
bogdanm 84:0b3ab51c8877 13 * Redistribution and use in source and binary forms, with or without modification,
bogdanm 84:0b3ab51c8877 14 * are permitted provided that the following conditions are met:
bogdanm 84:0b3ab51c8877 15 * 1. Redistributions of source code must retain the above copyright notice,
bogdanm 84:0b3ab51c8877 16 * this list of conditions and the following disclaimer.
bogdanm 84:0b3ab51c8877 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
bogdanm 84:0b3ab51c8877 18 * this list of conditions and the following disclaimer in the documentation
bogdanm 84:0b3ab51c8877 19 * and/or other materials provided with the distribution.
bogdanm 84:0b3ab51c8877 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
bogdanm 84:0b3ab51c8877 21 * may be used to endorse or promote products derived from this software
bogdanm 84:0b3ab51c8877 22 * without specific prior written permission.
bogdanm 84:0b3ab51c8877 23 *
bogdanm 84:0b3ab51c8877 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
bogdanm 84:0b3ab51c8877 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
bogdanm 84:0b3ab51c8877 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
bogdanm 84:0b3ab51c8877 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
bogdanm 84:0b3ab51c8877 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
bogdanm 84:0b3ab51c8877 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
bogdanm 84:0b3ab51c8877 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
bogdanm 84:0b3ab51c8877 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
bogdanm 84:0b3ab51c8877 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
bogdanm 84:0b3ab51c8877 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
bogdanm 84:0b3ab51c8877 34 *
bogdanm 84:0b3ab51c8877 35 ******************************************************************************
bogdanm 84:0b3ab51c8877 36 */
bogdanm 84:0b3ab51c8877 37
bogdanm 84:0b3ab51c8877 38 /* Define to prevent recursive inclusion -------------------------------------*/
bogdanm 84:0b3ab51c8877 39 #ifndef __STM32L0xx_HAL_UART_H
bogdanm 84:0b3ab51c8877 40 #define __STM32L0xx_HAL_UART_H
bogdanm 84:0b3ab51c8877 41
bogdanm 84:0b3ab51c8877 42 #ifdef __cplusplus
bogdanm 84:0b3ab51c8877 43 extern "C" {
bogdanm 84:0b3ab51c8877 44 #endif
bogdanm 84:0b3ab51c8877 45
bogdanm 84:0b3ab51c8877 46 /* Includes ------------------------------------------------------------------*/
bogdanm 84:0b3ab51c8877 47 #include "stm32l0xx_hal_def.h"
bogdanm 84:0b3ab51c8877 48
bogdanm 84:0b3ab51c8877 49 /** @addtogroup STM32L0xx_HAL_Driver
bogdanm 84:0b3ab51c8877 50 * @{
bogdanm 84:0b3ab51c8877 51 */
bogdanm 84:0b3ab51c8877 52
bogdanm 84:0b3ab51c8877 53 /** @addtogroup UART
bogdanm 84:0b3ab51c8877 54 * @{
bogdanm 84:0b3ab51c8877 55 */
bogdanm 84:0b3ab51c8877 56
bogdanm 84:0b3ab51c8877 57 /* Exported types ------------------------------------------------------------*/
bogdanm 84:0b3ab51c8877 58
bogdanm 84:0b3ab51c8877 59 /**
bogdanm 84:0b3ab51c8877 60 * @brief UART Init Structure definition
bogdanm 84:0b3ab51c8877 61 */
bogdanm 84:0b3ab51c8877 62 typedef struct
bogdanm 84:0b3ab51c8877 63 {
bogdanm 84:0b3ab51c8877 64 uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
bogdanm 84:0b3ab51c8877 65 The baud rate register is computed using the following formula:
bogdanm 84:0b3ab51c8877 66 - If oversampling is 16 or in LIN mode,
bogdanm 84:0b3ab51c8877 67 Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
bogdanm 84:0b3ab51c8877 68 - If oversampling is 8,
bogdanm 84:0b3ab51c8877 69 Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
bogdanm 84:0b3ab51c8877 70 Baud Rate Register[3] = 0
bogdanm 84:0b3ab51c8877 71 Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
bogdanm 84:0b3ab51c8877 72
bogdanm 84:0b3ab51c8877 73 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
bogdanm 84:0b3ab51c8877 74 This parameter can be a value of @ref UART_Word_Length */
bogdanm 84:0b3ab51c8877 75
bogdanm 84:0b3ab51c8877 76 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
bogdanm 84:0b3ab51c8877 77 This parameter can be a value of @ref UART_Stop_Bits */
bogdanm 84:0b3ab51c8877 78
bogdanm 84:0b3ab51c8877 79 uint32_t Parity; /*!< Specifies the parity mode.
bogdanm 84:0b3ab51c8877 80 This parameter can be a value of @ref UART_Parity
bogdanm 84:0b3ab51c8877 81 @note When parity is enabled, the computed parity is inserted
bogdanm 84:0b3ab51c8877 82 at the MSB position of the transmitted data (9th bit when
bogdanm 84:0b3ab51c8877 83 the word length is set to 9 data bits; 8th bit when the
bogdanm 84:0b3ab51c8877 84 word length is set to 8 data bits). */
bogdanm 84:0b3ab51c8877 85
bogdanm 84:0b3ab51c8877 86 uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
bogdanm 84:0b3ab51c8877 87 This parameter can be a value of @ref UART_Mode */
bogdanm 84:0b3ab51c8877 88
bogdanm 84:0b3ab51c8877 89 uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
bogdanm 84:0b3ab51c8877 90 or disabled.
bogdanm 84:0b3ab51c8877 91 This parameter can be a value of @ref UART_Hardware_Flow_Control */
bogdanm 84:0b3ab51c8877 92
bogdanm 84:0b3ab51c8877 93 uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
bogdanm 84:0b3ab51c8877 94 This parameter can be a value of @ref UART_Over_Sampling */
bogdanm 84:0b3ab51c8877 95
bogdanm 84:0b3ab51c8877 96 uint32_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
bogdanm 84:0b3ab51c8877 97 Selecting the single sample method increases the receiver tolerance to clock
bogdanm 84:0b3ab51c8877 98 deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
bogdanm 84:0b3ab51c8877 99 }UART_InitTypeDef;
bogdanm 84:0b3ab51c8877 100
bogdanm 84:0b3ab51c8877 101 /**
bogdanm 84:0b3ab51c8877 102 * @brief UART Advanced Features initalization structure definition
bogdanm 84:0b3ab51c8877 103 */
bogdanm 84:0b3ab51c8877 104 typedef struct
bogdanm 84:0b3ab51c8877 105 {
bogdanm 84:0b3ab51c8877 106 uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
bogdanm 84:0b3ab51c8877 107 Advanced Features may be initialized at the same time .
bogdanm 84:0b3ab51c8877 108 This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
bogdanm 84:0b3ab51c8877 109
bogdanm 84:0b3ab51c8877 110 uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
bogdanm 84:0b3ab51c8877 111 This parameter can be a value of @ref UART_Tx_Inv */
bogdanm 84:0b3ab51c8877 112
bogdanm 84:0b3ab51c8877 113 uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
bogdanm 84:0b3ab51c8877 114 This parameter can be a value of @ref UART_Rx_Inv */
bogdanm 84:0b3ab51c8877 115
bogdanm 84:0b3ab51c8877 116 uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
bogdanm 84:0b3ab51c8877 117 vs negative/inverted logic).
bogdanm 84:0b3ab51c8877 118 This parameter can be a value of @ref UART_Data_Inv */
bogdanm 84:0b3ab51c8877 119
bogdanm 84:0b3ab51c8877 120 uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
bogdanm 84:0b3ab51c8877 121 This parameter can be a value of @ref UART_Rx_Tx_Swap */
bogdanm 84:0b3ab51c8877 122
bogdanm 84:0b3ab51c8877 123 uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
bogdanm 84:0b3ab51c8877 124 This parameter can be a value of @ref UART_Overrun_Disable */
bogdanm 84:0b3ab51c8877 125
bogdanm 84:0b3ab51c8877 126 uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
bogdanm 84:0b3ab51c8877 127 This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
bogdanm 84:0b3ab51c8877 128
bogdanm 84:0b3ab51c8877 129 uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
bogdanm 84:0b3ab51c8877 130 This parameter can be a value of @ref UART_AutoBaudRate_Enable */
bogdanm 84:0b3ab51c8877 131
bogdanm 84:0b3ab51c8877 132 uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
bogdanm 84:0b3ab51c8877 133 detection is carried out.
bogdanm 84:0b3ab51c8877 134 This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
bogdanm 84:0b3ab51c8877 135
bogdanm 84:0b3ab51c8877 136 uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
bogdanm 84:0b3ab51c8877 137 This parameter can be a value of @ref UART_MSB_First */
bogdanm 84:0b3ab51c8877 138 } UART_AdvFeatureInitTypeDef;
bogdanm 84:0b3ab51c8877 139
bogdanm 84:0b3ab51c8877 140 /**
bogdanm 84:0b3ab51c8877 141 * @brief HAL UART State structures definition
bogdanm 84:0b3ab51c8877 142 */
bogdanm 84:0b3ab51c8877 143 typedef enum
bogdanm 84:0b3ab51c8877 144 {
bogdanm 84:0b3ab51c8877 145 HAL_UART_STATE_RESET = 0x00, /*!< Peripheral Reset state */
bogdanm 84:0b3ab51c8877 146 HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
bogdanm 84:0b3ab51c8877 147 HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
bogdanm 84:0b3ab51c8877 148 HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
bogdanm 84:0b3ab51c8877 149 HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
bogdanm 84:0b3ab51c8877 150 HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
bogdanm 84:0b3ab51c8877 151 HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
bogdanm 84:0b3ab51c8877 152 HAL_UART_STATE_ERROR = 0x04 /*!< Error */
bogdanm 84:0b3ab51c8877 153 }HAL_UART_StateTypeDef;
bogdanm 84:0b3ab51c8877 154
bogdanm 84:0b3ab51c8877 155 /**
bogdanm 84:0b3ab51c8877 156 * @brief HAL UART Error Code structure definition
bogdanm 84:0b3ab51c8877 157 */
bogdanm 84:0b3ab51c8877 158 typedef enum
bogdanm 84:0b3ab51c8877 159 {
bogdanm 84:0b3ab51c8877 160 HAL_UART_ERROR_NONE = 0x00, /*!< No error */
bogdanm 84:0b3ab51c8877 161 HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
bogdanm 84:0b3ab51c8877 162 HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
bogdanm 84:0b3ab51c8877 163 HAL_UART_ERROR_FE = 0x04, /*!< frame error */
bogdanm 84:0b3ab51c8877 164 HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
bogdanm 84:0b3ab51c8877 165 HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
bogdanm 84:0b3ab51c8877 166 }HAL_UART_ErrorTypeDef;
bogdanm 84:0b3ab51c8877 167
bogdanm 84:0b3ab51c8877 168 /**
bogdanm 84:0b3ab51c8877 169 * @brief UART clock sources definition
bogdanm 84:0b3ab51c8877 170 */
bogdanm 84:0b3ab51c8877 171 typedef enum
bogdanm 84:0b3ab51c8877 172 {
bogdanm 84:0b3ab51c8877 173 UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
bogdanm 84:0b3ab51c8877 174 UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
bogdanm 84:0b3ab51c8877 175 UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
bogdanm 84:0b3ab51c8877 176 UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
bogdanm 84:0b3ab51c8877 177 UART_CLOCKSOURCE_LSE = 0x08 /*!< LSE clock source */
bogdanm 84:0b3ab51c8877 178 }UART_ClockSourceTypeDef;
bogdanm 84:0b3ab51c8877 179
bogdanm 84:0b3ab51c8877 180 /**
bogdanm 84:0b3ab51c8877 181 * @brief UART handle Structure definition
bogdanm 84:0b3ab51c8877 182 */
bogdanm 84:0b3ab51c8877 183 typedef struct
bogdanm 84:0b3ab51c8877 184 {
bogdanm 84:0b3ab51c8877 185 USART_TypeDef *Instance; /* UART registers base address */
bogdanm 84:0b3ab51c8877 186
bogdanm 84:0b3ab51c8877 187 UART_InitTypeDef Init; /* UART communication parameters */
bogdanm 84:0b3ab51c8877 188
bogdanm 84:0b3ab51c8877 189 UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
bogdanm 84:0b3ab51c8877 190
bogdanm 84:0b3ab51c8877 191 uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
bogdanm 84:0b3ab51c8877 192
bogdanm 84:0b3ab51c8877 193 uint16_t TxXferSize; /* UART Tx Transfer size */
bogdanm 84:0b3ab51c8877 194
bogdanm 84:0b3ab51c8877 195 uint16_t TxXferCount; /* UART Tx Transfer Counter */
bogdanm 84:0b3ab51c8877 196
bogdanm 84:0b3ab51c8877 197 uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
bogdanm 84:0b3ab51c8877 198
bogdanm 84:0b3ab51c8877 199 uint16_t RxXferSize; /* UART Rx Transfer size */
bogdanm 84:0b3ab51c8877 200
bogdanm 84:0b3ab51c8877 201 uint16_t RxXferCount; /* UART Rx Transfer Counter */
bogdanm 84:0b3ab51c8877 202
bogdanm 84:0b3ab51c8877 203 uint16_t Mask; /* UART Rx RDR register mask */
bogdanm 84:0b3ab51c8877 204
bogdanm 84:0b3ab51c8877 205 DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
bogdanm 84:0b3ab51c8877 206
bogdanm 84:0b3ab51c8877 207 DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
bogdanm 84:0b3ab51c8877 208
bogdanm 84:0b3ab51c8877 209 HAL_LockTypeDef Lock; /* Locking object */
bogdanm 84:0b3ab51c8877 210
bogdanm 84:0b3ab51c8877 211 __IO HAL_UART_StateTypeDef State; /* UART communication state */
bogdanm 84:0b3ab51c8877 212
bogdanm 84:0b3ab51c8877 213 __IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
bogdanm 84:0b3ab51c8877 214
bogdanm 84:0b3ab51c8877 215 }UART_HandleTypeDef;
bogdanm 84:0b3ab51c8877 216
bogdanm 84:0b3ab51c8877 217
bogdanm 84:0b3ab51c8877 218 /* Exported constants --------------------------------------------------------*/
bogdanm 84:0b3ab51c8877 219 /** @defgroup UART_Exported_Constants
bogdanm 84:0b3ab51c8877 220 * @{
bogdanm 84:0b3ab51c8877 221 */
bogdanm 84:0b3ab51c8877 222
bogdanm 84:0b3ab51c8877 223 /** @defgroup UART_Stop_Bits UART Number of Stop Bits
bogdanm 84:0b3ab51c8877 224 * @{
bogdanm 84:0b3ab51c8877 225 */
bogdanm 84:0b3ab51c8877 226 #define UART_STOPBITS_1 ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 227 #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
bogdanm 84:0b3ab51c8877 228 #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
bogdanm 84:0b3ab51c8877 229 ((STOPBITS) == UART_STOPBITS_2))
bogdanm 84:0b3ab51c8877 230 /**
bogdanm 84:0b3ab51c8877 231 * @}
bogdanm 84:0b3ab51c8877 232 */
bogdanm 84:0b3ab51c8877 233
bogdanm 84:0b3ab51c8877 234 /** @defgroup UART_Parity UART Parity
bogdanm 84:0b3ab51c8877 235 * @{
bogdanm 84:0b3ab51c8877 236 */
bogdanm 84:0b3ab51c8877 237 #define UART_PARITY_NONE ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 238 #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
bogdanm 84:0b3ab51c8877 239 #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
bogdanm 84:0b3ab51c8877 240 #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
bogdanm 84:0b3ab51c8877 241 ((PARITY) == UART_PARITY_EVEN) || \
bogdanm 84:0b3ab51c8877 242 ((PARITY) == UART_PARITY_ODD))
bogdanm 84:0b3ab51c8877 243 /**
bogdanm 84:0b3ab51c8877 244 * @}
bogdanm 84:0b3ab51c8877 245 */
bogdanm 84:0b3ab51c8877 246
bogdanm 84:0b3ab51c8877 247 /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
bogdanm 84:0b3ab51c8877 248 * @{
bogdanm 84:0b3ab51c8877 249 */
bogdanm 84:0b3ab51c8877 250 #define UART_HWCONTROL_NONE ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 251 #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
bogdanm 84:0b3ab51c8877 252 #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
bogdanm 84:0b3ab51c8877 253 #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
bogdanm 84:0b3ab51c8877 254 #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
bogdanm 84:0b3ab51c8877 255 (((CONTROL) == UART_HWCONTROL_NONE) || \
bogdanm 84:0b3ab51c8877 256 ((CONTROL) == UART_HWCONTROL_RTS) || \
bogdanm 84:0b3ab51c8877 257 ((CONTROL) == UART_HWCONTROL_CTS) || \
bogdanm 84:0b3ab51c8877 258 ((CONTROL) == UART_HWCONTROL_RTS_CTS))
bogdanm 84:0b3ab51c8877 259 /**
bogdanm 84:0b3ab51c8877 260 * @}
bogdanm 84:0b3ab51c8877 261 */
bogdanm 84:0b3ab51c8877 262
bogdanm 84:0b3ab51c8877 263 /** @defgroup UART_Mode UART Transfer Mode
bogdanm 84:0b3ab51c8877 264 * @{
bogdanm 84:0b3ab51c8877 265 */
bogdanm 84:0b3ab51c8877 266 #define UART_MODE_RX ((uint32_t)USART_CR1_RE)
bogdanm 84:0b3ab51c8877 267 #define UART_MODE_TX ((uint32_t)USART_CR1_TE)
bogdanm 84:0b3ab51c8877 268 #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
bogdanm 84:0b3ab51c8877 269 #define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
bogdanm 84:0b3ab51c8877 270 /**
bogdanm 84:0b3ab51c8877 271 * @}
bogdanm 84:0b3ab51c8877 272 */
bogdanm 84:0b3ab51c8877 273
bogdanm 84:0b3ab51c8877 274 /** @defgroup UART_State UART State
bogdanm 84:0b3ab51c8877 275 * @{
bogdanm 84:0b3ab51c8877 276 */
bogdanm 84:0b3ab51c8877 277 #define UART_STATE_DISABLE ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 278 #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
bogdanm 84:0b3ab51c8877 279 #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
bogdanm 84:0b3ab51c8877 280 ((STATE) == UART_STATE_ENABLE))
bogdanm 84:0b3ab51c8877 281 /**
bogdanm 84:0b3ab51c8877 282 * @}
bogdanm 84:0b3ab51c8877 283 */
bogdanm 84:0b3ab51c8877 284
bogdanm 84:0b3ab51c8877 285 /** @defgroup UART_Over_Sampling UART Over Sampling
bogdanm 84:0b3ab51c8877 286 * @{
bogdanm 84:0b3ab51c8877 287 */
bogdanm 84:0b3ab51c8877 288 #define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 289 #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
bogdanm 84:0b3ab51c8877 290 #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
bogdanm 84:0b3ab51c8877 291 ((SAMPLING) == UART_OVERSAMPLING_8))
bogdanm 84:0b3ab51c8877 292 /**
bogdanm 84:0b3ab51c8877 293 * @}
bogdanm 84:0b3ab51c8877 294 */
bogdanm 84:0b3ab51c8877 295
bogdanm 84:0b3ab51c8877 296 /** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
bogdanm 84:0b3ab51c8877 297 * @{
bogdanm 84:0b3ab51c8877 298 */
bogdanm 84:0b3ab51c8877 299 #define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 300 #define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
bogdanm 84:0b3ab51c8877 301 #define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
bogdanm 84:0b3ab51c8877 302 ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
bogdanm 84:0b3ab51c8877 303 /**
bogdanm 84:0b3ab51c8877 304 * @}
bogdanm 84:0b3ab51c8877 305 */
bogdanm 84:0b3ab51c8877 306
bogdanm 84:0b3ab51c8877 307
bogdanm 84:0b3ab51c8877 308 /** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
bogdanm 84:0b3ab51c8877 309 * @{
bogdanm 84:0b3ab51c8877 310 */
bogdanm 84:0b3ab51c8877 311 #define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 312 #define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
bogdanm 84:0b3ab51c8877 313 #define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
bogdanm 84:0b3ab51c8877 314 ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
bogdanm 84:0b3ab51c8877 315 /**
bogdanm 84:0b3ab51c8877 316 * @}
bogdanm 84:0b3ab51c8877 317 */
bogdanm 84:0b3ab51c8877 318
bogdanm 84:0b3ab51c8877 319 /** @defgroup UART_LIN UART Local Interconnection Network mode
bogdanm 84:0b3ab51c8877 320 * @{
bogdanm 84:0b3ab51c8877 321 */
bogdanm 84:0b3ab51c8877 322 #define UART_LIN_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 323 #define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
bogdanm 84:0b3ab51c8877 324 #define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
bogdanm 84:0b3ab51c8877 325 ((LIN) == UART_LIN_ENABLE))
bogdanm 84:0b3ab51c8877 326 /**
bogdanm 84:0b3ab51c8877 327 * @}
bogdanm 84:0b3ab51c8877 328 */
bogdanm 84:0b3ab51c8877 329
bogdanm 84:0b3ab51c8877 330 /** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
bogdanm 84:0b3ab51c8877 331 * @{
bogdanm 84:0b3ab51c8877 332 */
bogdanm 84:0b3ab51c8877 333 #define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 334 #define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
bogdanm 84:0b3ab51c8877 335 #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
bogdanm 84:0b3ab51c8877 336 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
bogdanm 84:0b3ab51c8877 337 /**
bogdanm 84:0b3ab51c8877 338 * @}
bogdanm 84:0b3ab51c8877 339 */
bogdanm 84:0b3ab51c8877 340
bogdanm 84:0b3ab51c8877 341
bogdanm 84:0b3ab51c8877 342
bogdanm 84:0b3ab51c8877 343 /** @defgroup UART_One_Bit UART One Bit sampling
bogdanm 84:0b3ab51c8877 344 * @{
bogdanm 84:0b3ab51c8877 345 */
bogdanm 84:0b3ab51c8877 346 #define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 347 #define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
bogdanm 84:0b3ab51c8877 348 #define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
bogdanm 84:0b3ab51c8877 349 ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
bogdanm 84:0b3ab51c8877 350 /**
bogdanm 84:0b3ab51c8877 351 * @}
bogdanm 84:0b3ab51c8877 352 */
bogdanm 84:0b3ab51c8877 353
bogdanm 84:0b3ab51c8877 354 /** @defgroup UART_DMA_Tx UART DMA Tx
bogdanm 84:0b3ab51c8877 355 * @{
bogdanm 84:0b3ab51c8877 356 */
bogdanm 84:0b3ab51c8877 357 #define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 358 #define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
bogdanm 84:0b3ab51c8877 359 #define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
bogdanm 84:0b3ab51c8877 360 ((DMATX) == UART_DMA_TX_ENABLE))
bogdanm 84:0b3ab51c8877 361 /**
bogdanm 84:0b3ab51c8877 362 * @}
bogdanm 84:0b3ab51c8877 363 */
bogdanm 84:0b3ab51c8877 364
bogdanm 84:0b3ab51c8877 365 /** @defgroup UART_DMA_Rx UART DMA Rx
bogdanm 84:0b3ab51c8877 366 * @{
bogdanm 84:0b3ab51c8877 367 */
bogdanm 84:0b3ab51c8877 368 #define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 369 #define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
bogdanm 84:0b3ab51c8877 370 #define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
bogdanm 84:0b3ab51c8877 371 ((DMARX) == UART_DMA_RX_ENABLE))
bogdanm 84:0b3ab51c8877 372 /**
bogdanm 84:0b3ab51c8877 373 * @}
bogdanm 84:0b3ab51c8877 374 */
bogdanm 84:0b3ab51c8877 375
bogdanm 84:0b3ab51c8877 376 /** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
bogdanm 84:0b3ab51c8877 377 * @{
bogdanm 84:0b3ab51c8877 378 */
bogdanm 84:0b3ab51c8877 379 #define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 380 #define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
bogdanm 84:0b3ab51c8877 381 #define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
bogdanm 84:0b3ab51c8877 382 ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
bogdanm 84:0b3ab51c8877 383 /**
bogdanm 84:0b3ab51c8877 384 * @}
bogdanm 84:0b3ab51c8877 385 */
bogdanm 84:0b3ab51c8877 386
bogdanm 84:0b3ab51c8877 387 /** @defgroup UART_Flags UART Status Flags
bogdanm 84:0b3ab51c8877 388 * Elements values convention: 0xXXXX
bogdanm 84:0b3ab51c8877 389 * - 0xXXXX : Flag mask in the ISR register
bogdanm 84:0b3ab51c8877 390 * @{
bogdanm 84:0b3ab51c8877 391 */
bogdanm 84:0b3ab51c8877 392 #define UART_FLAG_REACK ((uint32_t)0x00400000)
bogdanm 84:0b3ab51c8877 393 #define UART_FLAG_TEACK ((uint32_t)0x00200000)
bogdanm 84:0b3ab51c8877 394 #define UART_FLAG_WUF ((uint32_t)0x00100000)
bogdanm 84:0b3ab51c8877 395 #define UART_FLAG_RWU ((uint32_t)0x00080000)
bogdanm 84:0b3ab51c8877 396 #define UART_FLAG_SBKF ((uint32_t)0x00040000
bogdanm 84:0b3ab51c8877 397 #define UART_FLAG_CMF ((uint32_t)0x00020000)
bogdanm 84:0b3ab51c8877 398 #define UART_FLAG_BUSY ((uint32_t)0x00010000)
bogdanm 84:0b3ab51c8877 399 #define UART_FLAG_ABRF ((uint32_t)0x00008000)
bogdanm 84:0b3ab51c8877 400 #define UART_FLAG_ABRE ((uint32_t)0x00004000)
bogdanm 84:0b3ab51c8877 401 #define UART_FLAG_EOBF ((uint32_t)0x00001000)
bogdanm 84:0b3ab51c8877 402 #define UART_FLAG_RTOF ((uint32_t)0x00000800)
bogdanm 84:0b3ab51c8877 403 #define UART_FLAG_CTS ((uint32_t)0x00000400)
bogdanm 84:0b3ab51c8877 404 #define UART_FLAG_CTSIF ((uint32_t)0x00000200)
bogdanm 84:0b3ab51c8877 405 #define UART_FLAG_LBDF ((uint32_t)0x00000100)
bogdanm 84:0b3ab51c8877 406 #define UART_FLAG_TXE ((uint32_t)0x00000080)
bogdanm 84:0b3ab51c8877 407 #define UART_FLAG_TC ((uint32_t)0x00000040)
bogdanm 84:0b3ab51c8877 408 #define UART_FLAG_RXNE ((uint32_t)0x00000020)
bogdanm 84:0b3ab51c8877 409 #define UART_FLAG_IDLE ((uint32_t)0x00000010)
bogdanm 84:0b3ab51c8877 410 #define UART_FLAG_ORE ((uint32_t)0x00000008)
bogdanm 84:0b3ab51c8877 411 #define UART_FLAG_NE ((uint32_t)0x00000004)
bogdanm 84:0b3ab51c8877 412 #define UART_FLAG_FE ((uint32_t)0x00000002)
bogdanm 84:0b3ab51c8877 413 #define UART_FLAG_PE ((uint32_t)0x00000001)
bogdanm 84:0b3ab51c8877 414 /**
bogdanm 84:0b3ab51c8877 415 * @}
bogdanm 84:0b3ab51c8877 416 */
bogdanm 84:0b3ab51c8877 417
bogdanm 84:0b3ab51c8877 418 /** @defgroup UART_Interrupt_definition UART Interrupts Definition
bogdanm 84:0b3ab51c8877 419 * Elements values convention: 0000ZZZZ0XXYYYYYb
bogdanm 84:0b3ab51c8877 420 * - YYYYY : Interrupt source position in the XX register (5bits)
bogdanm 84:0b3ab51c8877 421 * - XX : Interrupt source register (2bits)
bogdanm 84:0b3ab51c8877 422 * - 01: CR1 register
bogdanm 84:0b3ab51c8877 423 * - 10: CR2 register
bogdanm 84:0b3ab51c8877 424 * - 11: CR3 register
bogdanm 84:0b3ab51c8877 425 * - ZZZZ : Flag position in the ISR register(4bits)
bogdanm 84:0b3ab51c8877 426 * @{
bogdanm 84:0b3ab51c8877 427 */
bogdanm 84:0b3ab51c8877 428 #define UART_IT_PE ((uint32_t)0x0028)
bogdanm 84:0b3ab51c8877 429 #define UART_IT_TXE ((uint32_t)0x0727)
bogdanm 84:0b3ab51c8877 430 #define UART_IT_TC ((uint32_t)0x0626)
bogdanm 84:0b3ab51c8877 431 #define UART_IT_RXNE ((uint32_t)0x0525)
bogdanm 84:0b3ab51c8877 432 #define UART_IT_IDLE ((uint32_t)0x0424)
bogdanm 84:0b3ab51c8877 433 #define UART_IT_LBD ((uint32_t)0x0846)
bogdanm 84:0b3ab51c8877 434 #define UART_IT_CTS ((uint32_t)0x096A)
bogdanm 84:0b3ab51c8877 435 #define UART_IT_CM ((uint32_t)0x142E)
bogdanm 84:0b3ab51c8877 436 #define UART_IT_WUF ((uint32_t)0x1476)
bogdanm 84:0b3ab51c8877 437
bogdanm 84:0b3ab51c8877 438 /** Elements values convention: 000000000XXYYYYYb
bogdanm 84:0b3ab51c8877 439 * - YYYYY : Interrupt source position in the XX register (5bits)
bogdanm 84:0b3ab51c8877 440 * - XX : Interrupt source register (2bits)
bogdanm 84:0b3ab51c8877 441 * - 01: CR1 register
bogdanm 84:0b3ab51c8877 442 * - 10: CR2 register
bogdanm 84:0b3ab51c8877 443 * - 11: CR3 register
bogdanm 84:0b3ab51c8877 444 */
bogdanm 84:0b3ab51c8877 445 #define UART_IT_ERR ((uint32_t)0x0060)
bogdanm 84:0b3ab51c8877 446
bogdanm 84:0b3ab51c8877 447 /** Elements values convention: 0000ZZZZ00000000b
bogdanm 84:0b3ab51c8877 448 * - ZZZZ : Flag position in the ISR register(4bits)
bogdanm 84:0b3ab51c8877 449 */
bogdanm 84:0b3ab51c8877 450 #define UART_IT_ORE ((uint32_t)0x0300)
bogdanm 84:0b3ab51c8877 451 #define UART_IT_NE ((uint32_t)0x0200)
bogdanm 84:0b3ab51c8877 452 #define UART_IT_FE ((uint32_t)0x0100)
bogdanm 84:0b3ab51c8877 453 /**
bogdanm 84:0b3ab51c8877 454 * @}
bogdanm 84:0b3ab51c8877 455 */
bogdanm 84:0b3ab51c8877 456
bogdanm 84:0b3ab51c8877 457 /** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
bogdanm 84:0b3ab51c8877 458 * @{
bogdanm 84:0b3ab51c8877 459 */
bogdanm 84:0b3ab51c8877 460 #define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
bogdanm 84:0b3ab51c8877 461 #define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
bogdanm 84:0b3ab51c8877 462 #define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
bogdanm 84:0b3ab51c8877 463 #define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
bogdanm 84:0b3ab51c8877 464 #define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
bogdanm 84:0b3ab51c8877 465 #define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
bogdanm 84:0b3ab51c8877 466 #define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
bogdanm 84:0b3ab51c8877 467 #define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
bogdanm 84:0b3ab51c8877 468 #define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
bogdanm 84:0b3ab51c8877 469 #define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
bogdanm 84:0b3ab51c8877 470 #define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
bogdanm 84:0b3ab51c8877 471 #define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
bogdanm 84:0b3ab51c8877 472 /**
bogdanm 84:0b3ab51c8877 473 * @}
bogdanm 84:0b3ab51c8877 474 */
bogdanm 84:0b3ab51c8877 475
bogdanm 84:0b3ab51c8877 476 /** @defgroup UART_Request_Parameters UART Request Parameters
bogdanm 84:0b3ab51c8877 477 * @{
bogdanm 84:0b3ab51c8877 478 */
bogdanm 84:0b3ab51c8877 479 #define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
bogdanm 84:0b3ab51c8877 480 #define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
bogdanm 84:0b3ab51c8877 481 #define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
bogdanm 84:0b3ab51c8877 482 #define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
bogdanm 84:0b3ab51c8877 483 #define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
bogdanm 84:0b3ab51c8877 484 #define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
bogdanm 84:0b3ab51c8877 485 ((PARAM) == UART_SENDBREAK_REQUEST) || \
bogdanm 84:0b3ab51c8877 486 ((PARAM) == UART_MUTE_MODE_REQUEST) || \
bogdanm 84:0b3ab51c8877 487 ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
bogdanm 84:0b3ab51c8877 488 ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
bogdanm 84:0b3ab51c8877 489 /**
bogdanm 84:0b3ab51c8877 490 * @}
bogdanm 84:0b3ab51c8877 491 */
bogdanm 84:0b3ab51c8877 492
bogdanm 84:0b3ab51c8877 493 /** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
bogdanm 84:0b3ab51c8877 494 * @{
bogdanm 84:0b3ab51c8877 495 */
bogdanm 84:0b3ab51c8877 496 #define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 497 #define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
bogdanm 84:0b3ab51c8877 498 #define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
bogdanm 84:0b3ab51c8877 499 #define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
bogdanm 84:0b3ab51c8877 500 #define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
bogdanm 84:0b3ab51c8877 501 #define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
bogdanm 84:0b3ab51c8877 502 #define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
bogdanm 84:0b3ab51c8877 503 #define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
bogdanm 84:0b3ab51c8877 504 #define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
bogdanm 84:0b3ab51c8877 505 #define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
bogdanm 84:0b3ab51c8877 506 UART_ADVFEATURE_TXINVERT_INIT | \
bogdanm 84:0b3ab51c8877 507 UART_ADVFEATURE_RXINVERT_INIT | \
bogdanm 84:0b3ab51c8877 508 UART_ADVFEATURE_DATAINVERT_INIT | \
bogdanm 84:0b3ab51c8877 509 UART_ADVFEATURE_SWAP_INIT | \
bogdanm 84:0b3ab51c8877 510 UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
bogdanm 84:0b3ab51c8877 511 UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
bogdanm 84:0b3ab51c8877 512 UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
bogdanm 84:0b3ab51c8877 513 UART_ADVFEATURE_MSBFIRST_INIT))
bogdanm 84:0b3ab51c8877 514 /**
bogdanm 84:0b3ab51c8877 515 * @}
bogdanm 84:0b3ab51c8877 516 */
bogdanm 84:0b3ab51c8877 517
bogdanm 84:0b3ab51c8877 518 /** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
bogdanm 84:0b3ab51c8877 519 * @{
bogdanm 84:0b3ab51c8877 520 */
bogdanm 84:0b3ab51c8877 521 #define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 522 #define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
bogdanm 84:0b3ab51c8877 523 #define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
bogdanm 84:0b3ab51c8877 524 ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
bogdanm 84:0b3ab51c8877 525 /**
bogdanm 84:0b3ab51c8877 526 * @}
bogdanm 84:0b3ab51c8877 527 */
bogdanm 84:0b3ab51c8877 528
bogdanm 84:0b3ab51c8877 529 /** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
bogdanm 84:0b3ab51c8877 530 * @{
bogdanm 84:0b3ab51c8877 531 */
bogdanm 84:0b3ab51c8877 532 #define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 533 #define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
bogdanm 84:0b3ab51c8877 534 #define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
bogdanm 84:0b3ab51c8877 535 ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
bogdanm 84:0b3ab51c8877 536 /**
bogdanm 84:0b3ab51c8877 537 * @}
bogdanm 84:0b3ab51c8877 538 */
bogdanm 84:0b3ab51c8877 539
bogdanm 84:0b3ab51c8877 540 /** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
bogdanm 84:0b3ab51c8877 541 * @{
bogdanm 84:0b3ab51c8877 542 */
bogdanm 84:0b3ab51c8877 543 #define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 544 #define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
bogdanm 84:0b3ab51c8877 545 #define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
bogdanm 84:0b3ab51c8877 546 ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
bogdanm 84:0b3ab51c8877 547 /**
bogdanm 84:0b3ab51c8877 548 * @}
bogdanm 84:0b3ab51c8877 549 */
bogdanm 84:0b3ab51c8877 550
bogdanm 84:0b3ab51c8877 551 /** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
bogdanm 84:0b3ab51c8877 552 * @{
bogdanm 84:0b3ab51c8877 553 */
bogdanm 84:0b3ab51c8877 554 #define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 555 #define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
bogdanm 84:0b3ab51c8877 556 #define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
bogdanm 84:0b3ab51c8877 557 ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
bogdanm 84:0b3ab51c8877 558 /**
bogdanm 84:0b3ab51c8877 559 * @}
bogdanm 84:0b3ab51c8877 560 */
bogdanm 84:0b3ab51c8877 561
bogdanm 84:0b3ab51c8877 562 /** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
bogdanm 84:0b3ab51c8877 563 * @{
bogdanm 84:0b3ab51c8877 564 */
bogdanm 84:0b3ab51c8877 565 #define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 566 #define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
bogdanm 84:0b3ab51c8877 567 #define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
bogdanm 84:0b3ab51c8877 568 ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
bogdanm 84:0b3ab51c8877 569 /**
bogdanm 84:0b3ab51c8877 570 * @}
bogdanm 84:0b3ab51c8877 571 */
bogdanm 84:0b3ab51c8877 572
bogdanm 84:0b3ab51c8877 573 /** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
bogdanm 84:0b3ab51c8877 574 * @{
bogdanm 84:0b3ab51c8877 575 */
bogdanm 84:0b3ab51c8877 576 #define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 577 #define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
bogdanm 84:0b3ab51c8877 578 #define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
bogdanm 84:0b3ab51c8877 579 ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
bogdanm 84:0b3ab51c8877 580 /**
bogdanm 84:0b3ab51c8877 581 * @}
bogdanm 84:0b3ab51c8877 582 */
bogdanm 84:0b3ab51c8877 583
bogdanm 84:0b3ab51c8877 584 /** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
bogdanm 84:0b3ab51c8877 585 * @{
bogdanm 84:0b3ab51c8877 586 */
bogdanm 84:0b3ab51c8877 587 #define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 588 #define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
bogdanm 84:0b3ab51c8877 589 #define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
bogdanm 84:0b3ab51c8877 590 ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
bogdanm 84:0b3ab51c8877 591 /**
bogdanm 84:0b3ab51c8877 592 * @}
bogdanm 84:0b3ab51c8877 593 */
bogdanm 84:0b3ab51c8877 594
bogdanm 84:0b3ab51c8877 595 /** @defgroup UART_MSB_First UART Advanced Feature MSB First
bogdanm 84:0b3ab51c8877 596 * @{
bogdanm 84:0b3ab51c8877 597 */
bogdanm 84:0b3ab51c8877 598 #define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 599 #define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
bogdanm 84:0b3ab51c8877 600 #define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
bogdanm 84:0b3ab51c8877 601 ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
bogdanm 84:0b3ab51c8877 602 /**
bogdanm 84:0b3ab51c8877 603 * @}
bogdanm 84:0b3ab51c8877 604 */
bogdanm 84:0b3ab51c8877 605
bogdanm 84:0b3ab51c8877 606 /** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
bogdanm 84:0b3ab51c8877 607 * @{
bogdanm 84:0b3ab51c8877 608 */
bogdanm 84:0b3ab51c8877 609 #define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 610 #define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
bogdanm 84:0b3ab51c8877 611 #define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
bogdanm 84:0b3ab51c8877 612 ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
bogdanm 84:0b3ab51c8877 613 /**
bogdanm 84:0b3ab51c8877 614 * @}
bogdanm 84:0b3ab51c8877 615 */
bogdanm 84:0b3ab51c8877 616
bogdanm 84:0b3ab51c8877 617 /** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
bogdanm 84:0b3ab51c8877 618 * @{
bogdanm 84:0b3ab51c8877 619 */
bogdanm 84:0b3ab51c8877 620 #define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 621 #define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
bogdanm 84:0b3ab51c8877 622 #define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
bogdanm 84:0b3ab51c8877 623 ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
bogdanm 84:0b3ab51c8877 624 /**
bogdanm 84:0b3ab51c8877 625 * @}
bogdanm 84:0b3ab51c8877 626 */
bogdanm 84:0b3ab51c8877 627
bogdanm 84:0b3ab51c8877 628 /** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
bogdanm 84:0b3ab51c8877 629 * @{
bogdanm 84:0b3ab51c8877 630 */
bogdanm 84:0b3ab51c8877 631 #define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
bogdanm 84:0b3ab51c8877 632 /**
bogdanm 84:0b3ab51c8877 633 * @}
bogdanm 84:0b3ab51c8877 634 */
bogdanm 84:0b3ab51c8877 635
bogdanm 84:0b3ab51c8877 636 /** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
bogdanm 84:0b3ab51c8877 637 * @{
bogdanm 84:0b3ab51c8877 638 */
bogdanm 84:0b3ab51c8877 639 #define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
bogdanm 84:0b3ab51c8877 640 #define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
bogdanm 84:0b3ab51c8877 641 #define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
bogdanm 84:0b3ab51c8877 642 #define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
bogdanm 84:0b3ab51c8877 643 ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
bogdanm 84:0b3ab51c8877 644 ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
bogdanm 84:0b3ab51c8877 645 /**
bogdanm 84:0b3ab51c8877 646 * @}
bogdanm 84:0b3ab51c8877 647 */
bogdanm 84:0b3ab51c8877 648
bogdanm 84:0b3ab51c8877 649 /** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
bogdanm 84:0b3ab51c8877 650 * @{
bogdanm 84:0b3ab51c8877 651 */
bogdanm 84:0b3ab51c8877 652 #define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
bogdanm 84:0b3ab51c8877 653 #define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
bogdanm 84:0b3ab51c8877 654 #define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
bogdanm 84:0b3ab51c8877 655 ((POLARITY) == UART_DE_POLARITY_LOW))
bogdanm 84:0b3ab51c8877 656 /**
bogdanm 84:0b3ab51c8877 657 * @}
bogdanm 84:0b3ab51c8877 658 */
bogdanm 84:0b3ab51c8877 659
bogdanm 84:0b3ab51c8877 660 /** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
bogdanm 84:0b3ab51c8877 661 * @{
bogdanm 84:0b3ab51c8877 662 */
bogdanm 84:0b3ab51c8877 663 #define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
bogdanm 84:0b3ab51c8877 664 /**
bogdanm 84:0b3ab51c8877 665 * @}
bogdanm 84:0b3ab51c8877 666 */
bogdanm 84:0b3ab51c8877 667
bogdanm 84:0b3ab51c8877 668 /** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
bogdanm 84:0b3ab51c8877 669 * @{
bogdanm 84:0b3ab51c8877 670 */
bogdanm 84:0b3ab51c8877 671 #define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
bogdanm 84:0b3ab51c8877 672 /**
bogdanm 84:0b3ab51c8877 673 * @}
bogdanm 84:0b3ab51c8877 674 */
bogdanm 84:0b3ab51c8877 675
bogdanm 84:0b3ab51c8877 676 /** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
bogdanm 84:0b3ab51c8877 677 * @{
bogdanm 84:0b3ab51c8877 678 */
bogdanm 84:0b3ab51c8877 679 #define UART_IT_MASK ((uint32_t)0x001F)
bogdanm 84:0b3ab51c8877 680 /**
bogdanm 84:0b3ab51c8877 681 * @}
bogdanm 84:0b3ab51c8877 682 */
bogdanm 84:0b3ab51c8877 683
bogdanm 84:0b3ab51c8877 684 /**
bogdanm 84:0b3ab51c8877 685 * @}
bogdanm 84:0b3ab51c8877 686 */
bogdanm 84:0b3ab51c8877 687
bogdanm 84:0b3ab51c8877 688 /* Exported macro ------------------------------------------------------------*/
bogdanm 84:0b3ab51c8877 689 /** @defgroup UART_Exported_Macros
bogdanm 84:0b3ab51c8877 690 * @{
bogdanm 84:0b3ab51c8877 691 */
bogdanm 84:0b3ab51c8877 692
bogdanm 84:0b3ab51c8877 693 /** @brief Reset UART handle state
bogdanm 84:0b3ab51c8877 694 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 695 * The Handle Instance which can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 696 * @retval None
bogdanm 84:0b3ab51c8877 697 */
bogdanm 84:0b3ab51c8877 698 #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
bogdanm 84:0b3ab51c8877 699
bogdanm 84:0b3ab51c8877 700 /** @brief Checks whether the specified UART flag is set or not.
bogdanm 84:0b3ab51c8877 701 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 702 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 703 * @param __FLAG__: specifies the flag to check.
bogdanm 84:0b3ab51c8877 704 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 705 * @arg UART_FLAG_REACK: Receive enable ackowledge flag
bogdanm 84:0b3ab51c8877 706 * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
bogdanm 84:0b3ab51c8877 707 * @arg UART_FLAG_WUF: Wake up from stop mode flag
bogdanm 84:0b3ab51c8877 708 * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
bogdanm 84:0b3ab51c8877 709 * @arg UART_FLAG_SBKF: Send Break flag
bogdanm 84:0b3ab51c8877 710 * @arg UART_FLAG_CMF: Character match flag
bogdanm 84:0b3ab51c8877 711 * @arg UART_FLAG_BUSY: Busy flag
bogdanm 84:0b3ab51c8877 712 * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
bogdanm 84:0b3ab51c8877 713 * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
bogdanm 84:0b3ab51c8877 714 * @arg UART_FLAG_EOBF: End of block flag
bogdanm 84:0b3ab51c8877 715 * @arg UART_FLAG_RTOF: Receiver timeout flag
bogdanm 84:0b3ab51c8877 716 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
bogdanm 84:0b3ab51c8877 717 * @arg UART_FLAG_LBD: LIN Break detection flag
bogdanm 84:0b3ab51c8877 718 * @arg UART_FLAG_TXE: Transmit data register empty flag
bogdanm 84:0b3ab51c8877 719 * @arg UART_FLAG_TC: Transmission Complete flag
bogdanm 84:0b3ab51c8877 720 * @arg UART_FLAG_RXNE: Receive data register not empty flag
bogdanm 84:0b3ab51c8877 721 * @arg UART_FLAG_IDLE: Idle Line detection flag
bogdanm 84:0b3ab51c8877 722 * @arg UART_FLAG_ORE: OverRun Error flag
bogdanm 84:0b3ab51c8877 723 * @arg UART_FLAG_NE: Noise Error flag
bogdanm 84:0b3ab51c8877 724 * @arg UART_FLAG_FE: Framing Error flag
bogdanm 84:0b3ab51c8877 725 * @arg UART_FLAG_PE: Parity Error flag
bogdanm 84:0b3ab51c8877 726 * @retval The new state of __FLAG__ (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 727 */
bogdanm 84:0b3ab51c8877 728 #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
bogdanm 84:0b3ab51c8877 729
bogdanm 84:0b3ab51c8877 730 /** @brief Enables the specified UART interrupt.
bogdanm 84:0b3ab51c8877 731 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 732 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 733 * @param __INTERRUPT__: specifies the UART interrupt source to enable.
bogdanm 84:0b3ab51c8877 734 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 735 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm 84:0b3ab51c8877 736 * @arg UART_IT_CM: Character match interrupt
bogdanm 84:0b3ab51c8877 737 * @arg UART_IT_CTS: CTS change interrupt
bogdanm 84:0b3ab51c8877 738 * @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm 84:0b3ab51c8877 739 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm 84:0b3ab51c8877 740 * @arg UART_IT_TC: Transmission complete interrupt
bogdanm 84:0b3ab51c8877 741 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm 84:0b3ab51c8877 742 * @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm 84:0b3ab51c8877 743 * @arg UART_IT_PE: Parity Error interrupt
bogdanm 84:0b3ab51c8877 744 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
bogdanm 84:0b3ab51c8877 745 * @retval None
bogdanm 84:0b3ab51c8877 746 */
bogdanm 84:0b3ab51c8877 747 #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm 84:0b3ab51c8877 748 ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm 84:0b3ab51c8877 749 ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & UART_IT_MASK))))
bogdanm 84:0b3ab51c8877 750
bogdanm 84:0b3ab51c8877 751 /** @brief Disables the specified UART interrupt.
bogdanm 84:0b3ab51c8877 752 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 753 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 754 * @param __INTERRUPT__: specifies the UART interrupt source to disable.
bogdanm 84:0b3ab51c8877 755 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 756 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm 84:0b3ab51c8877 757 * @arg UART_IT_CM: Character match interrupt
bogdanm 84:0b3ab51c8877 758 * @arg UART_IT_CTS: CTS change interrupt
bogdanm 84:0b3ab51c8877 759 * @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm 84:0b3ab51c8877 760 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm 84:0b3ab51c8877 761 * @arg UART_IT_TC: Transmission complete interrupt
bogdanm 84:0b3ab51c8877 762 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm 84:0b3ab51c8877 763 * @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm 84:0b3ab51c8877 764 * @arg UART_IT_PE: Parity Error interrupt
bogdanm 84:0b3ab51c8877 765 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
bogdanm 84:0b3ab51c8877 766 * @retval None
bogdanm 84:0b3ab51c8877 767 */
bogdanm 84:0b3ab51c8877 768 #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm 84:0b3ab51c8877 769 ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm 84:0b3ab51c8877 770 ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & UART_IT_MASK))))
bogdanm 84:0b3ab51c8877 771
bogdanm 84:0b3ab51c8877 772 /** @brief Checks whether the specified UART interrupt has occurred or not.
bogdanm 84:0b3ab51c8877 773 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 774 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 775 * @param __IT__: specifies the UART interrupt to check.
bogdanm 84:0b3ab51c8877 776 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 777 * @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm 84:0b3ab51c8877 778 * @arg UART_IT_CM: Character match interrupt
bogdanm 84:0b3ab51c8877 779 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
bogdanm 84:0b3ab51c8877 780 * @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm 84:0b3ab51c8877 781 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm 84:0b3ab51c8877 782 * @arg UART_IT_TC: Transmission complete interrupt
bogdanm 84:0b3ab51c8877 783 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm 84:0b3ab51c8877 784 * @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm 84:0b3ab51c8877 785 * @arg UART_IT_ORE: OverRun Error interrupt
bogdanm 84:0b3ab51c8877 786 * @arg UART_IT_NE: Noise Error interrupt
bogdanm 84:0b3ab51c8877 787 * @arg UART_IT_FE: Framing Error interrupt
bogdanm 84:0b3ab51c8877 788 * @arg UART_IT_PE: Parity Error interrupt
bogdanm 84:0b3ab51c8877 789 * @retval The new state of __IT__ (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 790 */
bogdanm 84:0b3ab51c8877 791 #define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
bogdanm 84:0b3ab51c8877 792
bogdanm 84:0b3ab51c8877 793 /** @brief Checks whether the specified UART interrupt source is enabled.
bogdanm 84:0b3ab51c8877 794 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 795 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 796 * @param __IT__: specifies the UART interrupt source to check.
bogdanm 84:0b3ab51c8877 797 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 798 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
bogdanm 84:0b3ab51c8877 799 * @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm 84:0b3ab51c8877 800 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm 84:0b3ab51c8877 801 * @arg UART_IT_TC: Transmission complete interrupt
bogdanm 84:0b3ab51c8877 802 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm 84:0b3ab51c8877 803 * @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm 84:0b3ab51c8877 804 * @arg UART_IT_ORE: OverRun Error interrupt
bogdanm 84:0b3ab51c8877 805 * @arg UART_IT_NE: Noise Error interrupt
bogdanm 84:0b3ab51c8877 806 * @arg UART_IT_FE: Framing Error interrupt
bogdanm 84:0b3ab51c8877 807 * @arg UART_IT_PE: Parity Error interrupt
bogdanm 84:0b3ab51c8877 808 * @retval The new state of __IT__ (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 809 */
bogdanm 84:0b3ab51c8877 810 #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
bogdanm 84:0b3ab51c8877 811 (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
bogdanm 84:0b3ab51c8877 812
bogdanm 84:0b3ab51c8877 813 /** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
bogdanm 84:0b3ab51c8877 814 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 815 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 816 * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
bogdanm 84:0b3ab51c8877 817 * to clear the corresponding interrupt
bogdanm 84:0b3ab51c8877 818 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 819 * @arg UART_CLEAR_PEF: Parity Error Clear Flag
bogdanm 84:0b3ab51c8877 820 * @arg UART_CLEAR_FEF: Framing Error Clear Flag
bogdanm 84:0b3ab51c8877 821 * @arg UART_CLEAR_NEF: Noise detected Clear Flag
bogdanm 84:0b3ab51c8877 822 * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
bogdanm 84:0b3ab51c8877 823 * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
bogdanm 84:0b3ab51c8877 824 * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
bogdanm 84:0b3ab51c8877 825 * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
bogdanm 84:0b3ab51c8877 826 * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
bogdanm 84:0b3ab51c8877 827 * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
bogdanm 84:0b3ab51c8877 828 * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
bogdanm 84:0b3ab51c8877 829 * @arg UART_CLEAR_CMF: Character Match Clear Flag
bogdanm 84:0b3ab51c8877 830 * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
bogdanm 84:0b3ab51c8877 831 * @retval None
bogdanm 84:0b3ab51c8877 832 */
bogdanm 84:0b3ab51c8877 833 #define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
bogdanm 84:0b3ab51c8877 834
bogdanm 84:0b3ab51c8877 835 /** @brief Set a specific UART request flag.
bogdanm 84:0b3ab51c8877 836 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 837 * This parameter can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 838 * @param __REQ__: specifies the request flag to set
bogdanm 84:0b3ab51c8877 839 * This parameter can be one of the following values:
bogdanm 84:0b3ab51c8877 840 * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
bogdanm 84:0b3ab51c8877 841 * @arg UART_SENDBREAK_REQUEST: Send Break Request
bogdanm 84:0b3ab51c8877 842 * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
bogdanm 84:0b3ab51c8877 843 * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
bogdanm 84:0b3ab51c8877 844 * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
bogdanm 84:0b3ab51c8877 845 * @retval None
bogdanm 84:0b3ab51c8877 846 */
bogdanm 84:0b3ab51c8877 847 #define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
bogdanm 84:0b3ab51c8877 848
bogdanm 84:0b3ab51c8877 849 /** @brief Enable UART
bogdanm 84:0b3ab51c8877 850 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 851 * The Handle Instance can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 852 * @retval None
bogdanm 84:0b3ab51c8877 853 */
bogdanm 84:0b3ab51c8877 854 #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
bogdanm 84:0b3ab51c8877 855
bogdanm 84:0b3ab51c8877 856 /** @brief Disable UART
bogdanm 84:0b3ab51c8877 857 * @param __HANDLE__: specifies the UART Handle.
bogdanm 84:0b3ab51c8877 858 * The Handle Instance can be USART1, USART2 or LPUART.
bogdanm 84:0b3ab51c8877 859 * @retval None
bogdanm 84:0b3ab51c8877 860 */
bogdanm 84:0b3ab51c8877 861 #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
bogdanm 84:0b3ab51c8877 862
bogdanm 84:0b3ab51c8877 863 /** @brief BRR division operation to set BRR register with LPUART
bogdanm 84:0b3ab51c8877 864 * @param _PCLK_: LPUART clock
bogdanm 84:0b3ab51c8877 865 * @param _BAUD_: Baud rate set by the user
bogdanm 84:0b3ab51c8877 866 * @retval Division result
bogdanm 84:0b3ab51c8877 867 */
bogdanm 84:0b3ab51c8877 868 #define __DIV_LPUART(_PCLK_, _BAUD_) (((_PCLK_)*256)/((_BAUD_)))
bogdanm 84:0b3ab51c8877 869
bogdanm 84:0b3ab51c8877 870 /** @brief BRR division operation to set BRR register in 8-bit oversampling mode
bogdanm 84:0b3ab51c8877 871 * @param _PCLK_: UART clock
bogdanm 84:0b3ab51c8877 872 * @param _BAUD_: Baud rate set by the user
bogdanm 84:0b3ab51c8877 873 * @retval Division result
bogdanm 84:0b3ab51c8877 874 */
bogdanm 84:0b3ab51c8877 875 #define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
bogdanm 84:0b3ab51c8877 876
bogdanm 84:0b3ab51c8877 877 /** @brief BRR division operation to set BRR register in 16-bit oversampling mode
bogdanm 84:0b3ab51c8877 878 * @param _PCLK_: UART clock
bogdanm 84:0b3ab51c8877 879 * @param _BAUD_: Baud rate set by the user
bogdanm 84:0b3ab51c8877 880 * @retval Division result
bogdanm 84:0b3ab51c8877 881 */
bogdanm 84:0b3ab51c8877 882 #define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
bogdanm 84:0b3ab51c8877 883
bogdanm 84:0b3ab51c8877 884 /** @brief Check UART Baud rate
bogdanm 84:0b3ab51c8877 885 * @param BAUDRATE: Baudrate specified by the user
bogdanm 84:0b3ab51c8877 886 * The maximum Baud Rate is derived from the maximum clock on L0 (i.e. 32 MHz)
bogdanm 84:0b3ab51c8877 887 * divided by the smallest oversampling used on the USART (i.e. 8)
bogdanm 84:0b3ab51c8877 888 * @retval Test result (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 889 */
bogdanm 84:0b3ab51c8877 890 #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 4000001)
bogdanm 84:0b3ab51c8877 891
bogdanm 84:0b3ab51c8877 892 /** @brief Check UART byte address
bogdanm 84:0b3ab51c8877 893 * @param ADDRESS: UART 8-bit address for wake-up process scheme
bogdanm 84:0b3ab51c8877 894 * @retval Test result (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 895 */
bogdanm 84:0b3ab51c8877 896 #define IS_UART_7B_ADDRESS(ADDRESS) ((ADDRESS) <= 0x7F)
bogdanm 84:0b3ab51c8877 897
bogdanm 84:0b3ab51c8877 898 /** @brief Check UART 4-bit address
bogdanm 84:0b3ab51c8877 899 * @param ADDRESS: UART 4-bit address for wake-up process scheme
bogdanm 84:0b3ab51c8877 900 * @retval Test result (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 901 */
bogdanm 84:0b3ab51c8877 902 #define IS_UART_4B_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
bogdanm 84:0b3ab51c8877 903
bogdanm 84:0b3ab51c8877 904 /** @brief Check UART assertion time
bogdanm 84:0b3ab51c8877 905 * @param TIME: 5-bit value assertion time
bogdanm 84:0b3ab51c8877 906 * @retval Test result (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 907 */
bogdanm 84:0b3ab51c8877 908 #define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
bogdanm 84:0b3ab51c8877 909
bogdanm 84:0b3ab51c8877 910 /** @brief Check UART deassertion time
bogdanm 84:0b3ab51c8877 911 * @param TIME: 5-bit value deassertion time
bogdanm 84:0b3ab51c8877 912 * @retval Test result (TRUE or FALSE).
bogdanm 84:0b3ab51c8877 913 */
bogdanm 84:0b3ab51c8877 914 #define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
bogdanm 84:0b3ab51c8877 915
bogdanm 84:0b3ab51c8877 916 /**
bogdanm 84:0b3ab51c8877 917 * @}
bogdanm 84:0b3ab51c8877 918 */
bogdanm 84:0b3ab51c8877 919 /* Include UART HAL Extension module */
bogdanm 84:0b3ab51c8877 920 #include "stm32l0xx_hal_uart_ex.h"
bogdanm 84:0b3ab51c8877 921 /* Exported functions --------------------------------------------------------*/
bogdanm 84:0b3ab51c8877 922 /* Initialization/de-initialization functions ********************************/
bogdanm 84:0b3ab51c8877 923 HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 924 HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 925 HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
bogdanm 84:0b3ab51c8877 926 HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
bogdanm 84:0b3ab51c8877 927 HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 928 void HAL_UART_MspInit(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 929 void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 930
bogdanm 84:0b3ab51c8877 931 /* IO operation functions *****************************************************/
bogdanm 84:0b3ab51c8877 932 HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
bogdanm 84:0b3ab51c8877 933 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
bogdanm 84:0b3ab51c8877 934 HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
bogdanm 84:0b3ab51c8877 935 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
bogdanm 84:0b3ab51c8877 936 HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
bogdanm 84:0b3ab51c8877 937 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
bogdanm 84:0b3ab51c8877 938 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 939 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 940 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 941 void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 942 void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 943 void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 944 void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 945 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 946 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 947 void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 948
bogdanm 84:0b3ab51c8877 949 /* Peripheral Control and State functions ************************************/
bogdanm 84:0b3ab51c8877 950 HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 951 HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 952 void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 953 HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 954 HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 955 HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 956 HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 957 uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 958
bogdanm 84:0b3ab51c8877 959 /* Non-User functions ********************************************************/
bogdanm 84:0b3ab51c8877 960 void UART_SetConfig(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 961 HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 962 HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
bogdanm 84:0b3ab51c8877 963 void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
bogdanm 84:0b3ab51c8877 964 /**
bogdanm 84:0b3ab51c8877 965 * @}
bogdanm 84:0b3ab51c8877 966 */
bogdanm 84:0b3ab51c8877 967
bogdanm 84:0b3ab51c8877 968 /**
bogdanm 84:0b3ab51c8877 969 * @}
bogdanm 84:0b3ab51c8877 970 */
bogdanm 84:0b3ab51c8877 971
bogdanm 84:0b3ab51c8877 972 #ifdef __cplusplus
bogdanm 84:0b3ab51c8877 973 }
bogdanm 84:0b3ab51c8877 974 #endif
bogdanm 84:0b3ab51c8877 975
bogdanm 84:0b3ab51c8877 976 #endif /* __STM32L0xx_HAL_UART_H */
bogdanm 84:0b3ab51c8877 977
bogdanm 84:0b3ab51c8877 978 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/