File content as of revision 82:6473597d706e:

/*
 * Copyright (c) 2014, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
 * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
 */
/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_MCM_REGISTERS_H__
#define __HW_MCM_REGISTERS_H__

#include "regs.h"

/*
 * MK64F12 MCM
 *
 * Core Platform Miscellaneous Control Module
 *
 * Registers defined in this header file:
 * - HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration
 * - HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration
 * - HW_MCM_CR - Control Register
 * - HW_MCM_ISR - Interrupt Status Register
 * - HW_MCM_ETBCC - ETB Counter Control register
 * - HW_MCM_ETBRL - ETB Reload register
 * - HW_MCM_ETBCNT - ETB Counter Value register
 * - HW_MCM_PID - Process ID register
 *
 * - hw_mcm_t - Struct containing all module registers.
 */

//! @name Module base addresses
//@{
#ifndef REGS_MCM_BASE
#define HW_MCM_INSTANCE_COUNT (1U) //!< Number of instances of the MCM module.
#define REGS_MCM_BASE (0xE0080000U) //!< Base address for MCM.
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration (RO)
 *
 * Reset value: 0x001FU
 *
 * PLASC is a 16-bit read-only register identifying the presence/absence of bus
 * slave connections to the device's crossbar switch.
 */
typedef union _hw_mcm_plasc
{
    uint16_t U;
    struct _hw_mcm_plasc_bitfields
    {
        uint16_t ASC : 8;              //!< [7:0] Each bit in the ASC field indicates
                                       //! whether there is a corresponding connection to the crossbar switch's slave
                                       //! input port.
        uint16_t RESERVED0 : 8;        //!< [15:8]
    } B;
} hw_mcm_plasc_t;
#endif

/*!
 * @name Constants and macros for entire MCM_PLASC register
 */
//@{
#define HW_MCM_PLASC_ADDR        (REGS_MCM_BASE + 0x8U)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_PLASC             (*(__I hw_mcm_plasc_t *) HW_MCM_PLASC_ADDR)
#define HW_MCM_PLASC_RD()        (HW_MCM_PLASC.U)
#endif
//@}

/*
 * Constants & macros for individual MCM_PLASC bitfields
 */

/*!
 * @name Register MCM_PLASC, field ASC[7:0] (RO)
 *
 * Values:
 * - 0 - A bus slave connection to AXBS input port n is absent
 * - 1 - A bus slave connection to AXBS input port n is present
 */
//@{
#define BP_MCM_PLASC_ASC     (0U)          //!< Bit position for MCM_PLASC_ASC.
#define BM_MCM_PLASC_ASC     (0x00FFU)     //!< Bit mask for MCM_PLASC_ASC.
#define BS_MCM_PLASC_ASC     (8U)          //!< Bit field size in bits for MCM_PLASC_ASC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PLASC_ASC field.
#define BR_MCM_PLASC_ASC     (HW_MCM_PLASC.B.ASC)
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration (RO)
 *
 * Reset value: 0x0037U
 *
 * PLAMC is a 16-bit read-only register identifying the presence/absence of bus
 * master connections to the device's crossbar switch.
 */
typedef union _hw_mcm_plamc
{
    uint16_t U;
    struct _hw_mcm_plamc_bitfields
    {
        uint16_t AMC : 8;              //!< [7:0] Each bit in the AMC field indicates
                                       //! whether there is a corresponding connection to the AXBS master input port.
        uint16_t RESERVED0 : 8;        //!< [15:8]
    } B;
} hw_mcm_plamc_t;
#endif

/*!
 * @name Constants and macros for entire MCM_PLAMC register
 */
//@{
#define HW_MCM_PLAMC_ADDR        (REGS_MCM_BASE + 0xAU)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_PLAMC             (*(__I hw_mcm_plamc_t *) HW_MCM_PLAMC_ADDR)
#define HW_MCM_PLAMC_RD()        (HW_MCM_PLAMC.U)
#endif
//@}

/*
 * Constants & macros for individual MCM_PLAMC bitfields
 */

/*!
 * @name Register MCM_PLAMC, field AMC[7:0] (RO)
 *
 * Values:
 * - 0 - A bus master connection to AXBS input port n is absent
 * - 1 - A bus master connection to AXBS input port n is present
 */
//@{
#define BP_MCM_PLAMC_AMC     (0U)          //!< Bit position for MCM_PLAMC_AMC.
#define BM_MCM_PLAMC_AMC     (0x00FFU)     //!< Bit mask for MCM_PLAMC_AMC.
#define BS_MCM_PLAMC_AMC     (8U)          //!< Bit field size in bits for MCM_PLAMC_AMC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PLAMC_AMC field.
#define BR_MCM_PLAMC_AMC     (HW_MCM_PLAMC.B.AMC)
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_CR - Control Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_CR - Control Register (RW)
 *
 * Reset value: 0x00000000U
 *
 * CR defines the arbitration and protection schemes for the two system RAM
 * arrays.
 */
typedef union _hw_mcm_cr
{
    uint32_t U;
    struct _hw_mcm_cr_bitfields
    {
        uint32_t RESERVED0 : 24;       //!< [23:0]
        uint32_t SRAMUAP : 2;          //!< [25:24] SRAM_U arbitration priority
        uint32_t SRAMUWP : 1;          //!< [26] SRAM_U write protect
        uint32_t RESERVED1 : 1;        //!< [27]
        uint32_t SRAMLAP : 2;          //!< [29:28] SRAM_L arbitration priority
        uint32_t SRAMLWP : 1;          //!< [30] SRAM_L Write Protect
        uint32_t RESERVED2 : 1;        //!< [31]
    } B;
} hw_mcm_cr_t;
#endif

/*!
 * @name Constants and macros for entire MCM_CR register
 */
//@{
#define HW_MCM_CR_ADDR           (REGS_MCM_BASE + 0xCU)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_CR                (*(__IO hw_mcm_cr_t *) HW_MCM_CR_ADDR)
#define HW_MCM_CR_RD()           (HW_MCM_CR.U)
#define HW_MCM_CR_WR(v)          (HW_MCM_CR.U = (v))
#define HW_MCM_CR_SET(v)         (HW_MCM_CR_WR(HW_MCM_CR_RD() |  (v)))
#define HW_MCM_CR_CLR(v)         (HW_MCM_CR_WR(HW_MCM_CR_RD() & ~(v)))
#define HW_MCM_CR_TOG(v)         (HW_MCM_CR_WR(HW_MCM_CR_RD() ^  (v)))
#endif
//@}

/*
 * Constants & macros for individual MCM_CR bitfields
 */

/*!
 * @name Register MCM_CR, field SRAMUAP[25:24] (RW)
 *
 * Defines the arbitration scheme and priority for the processor and SRAM
 * backdoor accesses to the SRAM_U array.
 *
 * Values:
 * - 00 - Round robin
 * - 01 - Special round robin (favors SRAM backoor accesses over the processor)
 * - 10 - Fixed priority. Processor has highest, backdoor has lowest
 * - 11 - Fixed priority. Backdoor has highest, processor has lowest
 */
//@{
#define BP_MCM_CR_SRAMUAP    (24U)         //!< Bit position for MCM_CR_SRAMUAP.
#define BM_MCM_CR_SRAMUAP    (0x03000000U) //!< Bit mask for MCM_CR_SRAMUAP.
#define BS_MCM_CR_SRAMUAP    (2U)          //!< Bit field size in bits for MCM_CR_SRAMUAP.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMUAP field.
#define BR_MCM_CR_SRAMUAP    (HW_MCM_CR.B.SRAMUAP)
#endif

//! @brief Format value for bitfield MCM_CR_SRAMUAP.
#define BF_MCM_CR_SRAMUAP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMUAP), uint32_t) & BM_MCM_CR_SRAMUAP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMUAP field to a new value.
#define BW_MCM_CR_SRAMUAP(v) (HW_MCM_CR_WR((HW_MCM_CR_RD() & ~BM_MCM_CR_SRAMUAP) | BF_MCM_CR_SRAMUAP(v)))
#endif
//@}

/*!
 * @name Register MCM_CR, field SRAMUWP[26] (RW)
 *
 * When this bit is set, writes to SRAM_U array generates a bus error.
 */
//@{
#define BP_MCM_CR_SRAMUWP    (26U)         //!< Bit position for MCM_CR_SRAMUWP.
#define BM_MCM_CR_SRAMUWP    (0x04000000U) //!< Bit mask for MCM_CR_SRAMUWP.
#define BS_MCM_CR_SRAMUWP    (1U)          //!< Bit field size in bits for MCM_CR_SRAMUWP.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMUWP field.
#define BR_MCM_CR_SRAMUWP    (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMUWP))
#endif

//! @brief Format value for bitfield MCM_CR_SRAMUWP.
#define BF_MCM_CR_SRAMUWP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMUWP), uint32_t) & BM_MCM_CR_SRAMUWP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMUWP field to a new value.
#define BW_MCM_CR_SRAMUWP(v) (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMUWP) = (v))
#endif
//@}

/*!
 * @name Register MCM_CR, field SRAMLAP[29:28] (RW)
 *
 * Defines the arbitration scheme and priority for the processor and SRAM
 * backdoor accesses to the SRAM_L array.
 *
 * Values:
 * - 00 - Round robin
 * - 01 - Special round robin (favors SRAM backoor accesses over the processor)
 * - 10 - Fixed priority. Processor has highest, backdoor has lowest
 * - 11 - Fixed priority. Backdoor has highest, processor has lowest
 */
//@{
#define BP_MCM_CR_SRAMLAP    (28U)         //!< Bit position for MCM_CR_SRAMLAP.
#define BM_MCM_CR_SRAMLAP    (0x30000000U) //!< Bit mask for MCM_CR_SRAMLAP.
#define BS_MCM_CR_SRAMLAP    (2U)          //!< Bit field size in bits for MCM_CR_SRAMLAP.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMLAP field.
#define BR_MCM_CR_SRAMLAP    (HW_MCM_CR.B.SRAMLAP)
#endif

//! @brief Format value for bitfield MCM_CR_SRAMLAP.
#define BF_MCM_CR_SRAMLAP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMLAP), uint32_t) & BM_MCM_CR_SRAMLAP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMLAP field to a new value.
#define BW_MCM_CR_SRAMLAP(v) (HW_MCM_CR_WR((HW_MCM_CR_RD() & ~BM_MCM_CR_SRAMLAP) | BF_MCM_CR_SRAMLAP(v)))
#endif
//@}

/*!
 * @name Register MCM_CR, field SRAMLWP[30] (RW)
 *
 * When this bit is set, writes to SRAM_L array generates a bus error.
 */
//@{
#define BP_MCM_CR_SRAMLWP    (30U)         //!< Bit position for MCM_CR_SRAMLWP.
#define BM_MCM_CR_SRAMLWP    (0x40000000U) //!< Bit mask for MCM_CR_SRAMLWP.
#define BS_MCM_CR_SRAMLWP    (1U)          //!< Bit field size in bits for MCM_CR_SRAMLWP.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMLWP field.
#define BR_MCM_CR_SRAMLWP    (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMLWP))
#endif

//! @brief Format value for bitfield MCM_CR_SRAMLWP.
#define BF_MCM_CR_SRAMLWP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMLWP), uint32_t) & BM_MCM_CR_SRAMLWP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMLWP field to a new value.
#define BW_MCM_CR_SRAMLWP(v) (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMLWP) = (v))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_ISR - Interrupt Status Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_ISR - Interrupt Status Register (RW)
 *
 * Reset value: 0x00000000U
 */
typedef union _hw_mcm_isr
{
    uint32_t U;
    struct _hw_mcm_isr_bitfields
    {
        uint32_t RESERVED0 : 1;        //!< [0]
        uint32_t IRQ : 1;              //!< [1] Normal Interrupt Pending
        uint32_t NMI : 1;              //!< [2] Non-maskable Interrupt Pending
        uint32_t DHREQ : 1;            //!< [3] Debug Halt Request Indicator
        uint32_t RESERVED1 : 4;        //!< [7:4]
        uint32_t FIOC : 1;             //!< [8] FPU invalid operation interrupt status
        uint32_t FDZC : 1;             //!< [9] FPU divide-by-zero interrupt status
        uint32_t FOFC : 1;             //!< [10] FPU overflow interrupt status
        uint32_t FUFC : 1;             //!< [11] FPU underflow interrupt status
        uint32_t FIXC : 1;             //!< [12] FPU inexact interrupt status
        uint32_t RESERVED2 : 2;        //!< [14:13]
        uint32_t FIDC : 1;             //!< [15] FPU input denormal interrupt status
        uint32_t RESERVED3 : 8;        //!< [23:16]
        uint32_t FIOCE : 1;            //!< [24] FPU invalid operation interrupt enable
        uint32_t FDZCE : 1;            //!< [25] FPU divide-by-zero interrupt enable
        uint32_t FOFCE : 1;            //!< [26] FPU overflow interrupt enable
        uint32_t FUFCE : 1;            //!< [27] FPU underflow interrupt enable
        uint32_t FIXCE : 1;            //!< [28] FPU inexact interrupt enable
        uint32_t RESERVED4 : 2;        //!< [30:29]
        uint32_t FIDCE : 1;            //!< [31] FPU input denormal interrupt enable
    } B;
} hw_mcm_isr_t;
#endif

/*!
 * @name Constants and macros for entire MCM_ISR register
 */
//@{
#define HW_MCM_ISR_ADDR          (REGS_MCM_BASE + 0x10U)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_ISR               (*(__IO hw_mcm_isr_t *) HW_MCM_ISR_ADDR)
#define HW_MCM_ISR_RD()          (HW_MCM_ISR.U)
#define HW_MCM_ISR_WR(v)         (HW_MCM_ISR.U = (v))
#define HW_MCM_ISR_SET(v)        (HW_MCM_ISR_WR(HW_MCM_ISR_RD() |  (v)))
#define HW_MCM_ISR_CLR(v)        (HW_MCM_ISR_WR(HW_MCM_ISR_RD() & ~(v)))
#define HW_MCM_ISR_TOG(v)        (HW_MCM_ISR_WR(HW_MCM_ISR_RD() ^  (v)))
#endif
//@}

/*
 * Constants & macros for individual MCM_ISR bitfields
 */

/*!
 * @name Register MCM_ISR, field IRQ[1] (W1C)
 *
 * If ETBCC[RSPT] is set to 01b, this bit is set when the ETB counter expires.
 *
 * Values:
 * - 0 - No pending interrupt
 * - 1 - Due to the ETB counter expiring, a normal interrupt is pending
 */
//@{
#define BP_MCM_ISR_IRQ       (1U)          //!< Bit position for MCM_ISR_IRQ.
#define BM_MCM_ISR_IRQ       (0x00000002U) //!< Bit mask for MCM_ISR_IRQ.
#define BS_MCM_ISR_IRQ       (1U)          //!< Bit field size in bits for MCM_ISR_IRQ.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_IRQ field.
#define BR_MCM_ISR_IRQ       (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_IRQ))
#endif

//! @brief Format value for bitfield MCM_ISR_IRQ.
#define BF_MCM_ISR_IRQ(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_IRQ), uint32_t) & BM_MCM_ISR_IRQ)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IRQ field to a new value.
#define BW_MCM_ISR_IRQ(v)    (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_IRQ) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field NMI[2] (W1C)
 *
 * If ETBCC[RSPT] is set to 10b, this bit is set when the ETB counter expires.
 *
 * Values:
 * - 0 - No pending NMI
 * - 1 - Due to the ETB counter expiring, an NMI is pending
 */
//@{
#define BP_MCM_ISR_NMI       (2U)          //!< Bit position for MCM_ISR_NMI.
#define BM_MCM_ISR_NMI       (0x00000004U) //!< Bit mask for MCM_ISR_NMI.
#define BS_MCM_ISR_NMI       (1U)          //!< Bit field size in bits for MCM_ISR_NMI.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_NMI field.
#define BR_MCM_ISR_NMI       (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_NMI))
#endif

//! @brief Format value for bitfield MCM_ISR_NMI.
#define BF_MCM_ISR_NMI(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_NMI), uint32_t) & BM_MCM_ISR_NMI)

#ifndef __LANGUAGE_ASM__
//! @brief Set the NMI field to a new value.
#define BW_MCM_ISR_NMI(v)    (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_NMI) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field DHREQ[3] (RO)
 *
 * Indicates that a debug halt request is initiated due to a ETB counter
 * expiration, ETBCC[2:0] = 3b111 & ETBCV[10:0] = 11h0. This bit is cleared when the
 * counter is disabled or when the ETB counter is reloaded.
 *
 * Values:
 * - 0 - No debug halt request
 * - 1 - Debug halt request initiated
 */
//@{
#define BP_MCM_ISR_DHREQ     (3U)          //!< Bit position for MCM_ISR_DHREQ.
#define BM_MCM_ISR_DHREQ     (0x00000008U) //!< Bit mask for MCM_ISR_DHREQ.
#define BS_MCM_ISR_DHREQ     (1U)          //!< Bit field size in bits for MCM_ISR_DHREQ.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_DHREQ field.
#define BR_MCM_ISR_DHREQ     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_DHREQ))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIOC[8] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[IOC] bit and signals an
 * illegal operation has been detected in the processor's FPU. Once set, this bit
 * remains set until software clears the FPSCR[IOC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FIOC      (8U)          //!< Bit position for MCM_ISR_FIOC.
#define BM_MCM_ISR_FIOC      (0x00000100U) //!< Bit mask for MCM_ISR_FIOC.
#define BS_MCM_ISR_FIOC      (1U)          //!< Bit field size in bits for MCM_ISR_FIOC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIOC field.
#define BR_MCM_ISR_FIOC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FDZC[9] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[DZC] bit and signals a
 * divide by zero has been detected in the processor's FPU. Once set, this bit remains
 * set until software clears the FPSCR[DZC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FDZC      (9U)          //!< Bit position for MCM_ISR_FDZC.
#define BM_MCM_ISR_FDZC      (0x00000200U) //!< Bit mask for MCM_ISR_FDZC.
#define BS_MCM_ISR_FDZC      (1U)          //!< Bit field size in bits for MCM_ISR_FDZC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FDZC field.
#define BR_MCM_ISR_FDZC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FOFC[10] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[OFC] bit and signals an
 * overflow has been detected in the processor's FPU. Once set, this bit remains set
 * until software clears the FPSCR[OFC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FOFC      (10U)         //!< Bit position for MCM_ISR_FOFC.
#define BM_MCM_ISR_FOFC      (0x00000400U) //!< Bit mask for MCM_ISR_FOFC.
#define BS_MCM_ISR_FOFC      (1U)          //!< Bit field size in bits for MCM_ISR_FOFC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FOFC field.
#define BR_MCM_ISR_FOFC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FUFC[11] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[UFC] bit and signals an
 * underflow has been detected in the processor's FPU. Once set, this bit remains set
 * until software clears the FPSCR[UFC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FUFC      (11U)         //!< Bit position for MCM_ISR_FUFC.
#define BM_MCM_ISR_FUFC      (0x00000800U) //!< Bit mask for MCM_ISR_FUFC.
#define BS_MCM_ISR_FUFC      (1U)          //!< Bit field size in bits for MCM_ISR_FUFC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FUFC field.
#define BR_MCM_ISR_FUFC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIXC[12] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[IXC] bit and signals an
 * inexact number has been detected in the processor's FPU. Once set, this bit
 * remains set until software clears the FPSCR[IXC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FIXC      (12U)         //!< Bit position for MCM_ISR_FIXC.
#define BM_MCM_ISR_FIXC      (0x00001000U) //!< Bit mask for MCM_ISR_FIXC.
#define BS_MCM_ISR_FIXC      (1U)          //!< Bit field size in bits for MCM_ISR_FIXC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIXC field.
#define BR_MCM_ISR_FIXC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIDC[15] (RO)
 *
 * This read-only bit is a copy of the core's FPSCR[IDC] bit and signals input
 * denormalized number has been detected in the processor's FPU. Once set, this
 * bit remains set until software clears the FPSCR[IDC] bit.
 *
 * Values:
 * - 0 - No interrupt
 * - 1 - Interrupt occurred
 */
//@{
#define BP_MCM_ISR_FIDC      (15U)         //!< Bit position for MCM_ISR_FIDC.
#define BM_MCM_ISR_FIDC      (0x00008000U) //!< Bit mask for MCM_ISR_FIDC.
#define BS_MCM_ISR_FIDC      (1U)          //!< Bit field size in bits for MCM_ISR_FIDC.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIDC field.
#define BR_MCM_ISR_FIDC      (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDC))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIOCE[24] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FIOCE     (24U)         //!< Bit position for MCM_ISR_FIOCE.
#define BM_MCM_ISR_FIOCE     (0x01000000U) //!< Bit mask for MCM_ISR_FIOCE.
#define BS_MCM_ISR_FIOCE     (1U)          //!< Bit field size in bits for MCM_ISR_FIOCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIOCE field.
#define BR_MCM_ISR_FIOCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FIOCE.
#define BF_MCM_ISR_FIOCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIOCE), uint32_t) & BM_MCM_ISR_FIOCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FIOCE field to a new value.
#define BW_MCM_ISR_FIOCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOCE) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FDZCE[25] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FDZCE     (25U)         //!< Bit position for MCM_ISR_FDZCE.
#define BM_MCM_ISR_FDZCE     (0x02000000U) //!< Bit mask for MCM_ISR_FDZCE.
#define BS_MCM_ISR_FDZCE     (1U)          //!< Bit field size in bits for MCM_ISR_FDZCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FDZCE field.
#define BR_MCM_ISR_FDZCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FDZCE.
#define BF_MCM_ISR_FDZCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FDZCE), uint32_t) & BM_MCM_ISR_FDZCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FDZCE field to a new value.
#define BW_MCM_ISR_FDZCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZCE) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FOFCE[26] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FOFCE     (26U)         //!< Bit position for MCM_ISR_FOFCE.
#define BM_MCM_ISR_FOFCE     (0x04000000U) //!< Bit mask for MCM_ISR_FOFCE.
#define BS_MCM_ISR_FOFCE     (1U)          //!< Bit field size in bits for MCM_ISR_FOFCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FOFCE field.
#define BR_MCM_ISR_FOFCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FOFCE.
#define BF_MCM_ISR_FOFCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FOFCE), uint32_t) & BM_MCM_ISR_FOFCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FOFCE field to a new value.
#define BW_MCM_ISR_FOFCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFCE) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FUFCE[27] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FUFCE     (27U)         //!< Bit position for MCM_ISR_FUFCE.
#define BM_MCM_ISR_FUFCE     (0x08000000U) //!< Bit mask for MCM_ISR_FUFCE.
#define BS_MCM_ISR_FUFCE     (1U)          //!< Bit field size in bits for MCM_ISR_FUFCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FUFCE field.
#define BR_MCM_ISR_FUFCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FUFCE.
#define BF_MCM_ISR_FUFCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FUFCE), uint32_t) & BM_MCM_ISR_FUFCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FUFCE field to a new value.
#define BW_MCM_ISR_FUFCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFCE) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIXCE[28] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FIXCE     (28U)         //!< Bit position for MCM_ISR_FIXCE.
#define BM_MCM_ISR_FIXCE     (0x10000000U) //!< Bit mask for MCM_ISR_FIXCE.
#define BS_MCM_ISR_FIXCE     (1U)          //!< Bit field size in bits for MCM_ISR_FIXCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIXCE field.
#define BR_MCM_ISR_FIXCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FIXCE.
#define BF_MCM_ISR_FIXCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIXCE), uint32_t) & BM_MCM_ISR_FIXCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FIXCE field to a new value.
#define BW_MCM_ISR_FIXCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXCE) = (v))
#endif
//@}

/*!
 * @name Register MCM_ISR, field FIDCE[31] (RW)
 *
 * Values:
 * - 0 - Disable interrupt
 * - 1 - Enable interrupt
 */
//@{
#define BP_MCM_ISR_FIDCE     (31U)         //!< Bit position for MCM_ISR_FIDCE.
#define BM_MCM_ISR_FIDCE     (0x80000000U) //!< Bit mask for MCM_ISR_FIDCE.
#define BS_MCM_ISR_FIDCE     (1U)          //!< Bit field size in bits for MCM_ISR_FIDCE.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIDCE field.
#define BR_MCM_ISR_FIDCE     (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDCE))
#endif

//! @brief Format value for bitfield MCM_ISR_FIDCE.
#define BF_MCM_ISR_FIDCE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIDCE), uint32_t) & BM_MCM_ISR_FIDCE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FIDCE field to a new value.
#define BW_MCM_ISR_FIDCE(v)  (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDCE) = (v))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_ETBCC - ETB Counter Control register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_ETBCC - ETB Counter Control register (RW)
 *
 * Reset value: 0x00000000U
 */
typedef union _hw_mcm_etbcc
{
    uint32_t U;
    struct _hw_mcm_etbcc_bitfields
    {
        uint32_t CNTEN : 1;            //!< [0] Counter Enable
        uint32_t RSPT : 2;             //!< [2:1] Response Type
        uint32_t RLRQ : 1;             //!< [3] Reload Request
        uint32_t ETDIS : 1;            //!< [4] ETM-To-TPIU Disable
        uint32_t ITDIS : 1;            //!< [5] ITM-To-TPIU Disable
        uint32_t RESERVED0 : 26;       //!< [31:6]
    } B;
} hw_mcm_etbcc_t;
#endif

/*!
 * @name Constants and macros for entire MCM_ETBCC register
 */
//@{
#define HW_MCM_ETBCC_ADDR        (REGS_MCM_BASE + 0x14U)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBCC             (*(__IO hw_mcm_etbcc_t *) HW_MCM_ETBCC_ADDR)
#define HW_MCM_ETBCC_RD()        (HW_MCM_ETBCC.U)
#define HW_MCM_ETBCC_WR(v)       (HW_MCM_ETBCC.U = (v))
#define HW_MCM_ETBCC_SET(v)      (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() |  (v)))
#define HW_MCM_ETBCC_CLR(v)      (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() & ~(v)))
#define HW_MCM_ETBCC_TOG(v)      (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() ^  (v)))
#endif
//@}

/*
 * Constants & macros for individual MCM_ETBCC bitfields
 */

/*!
 * @name Register MCM_ETBCC, field CNTEN[0] (RW)
 *
 * Enables the ETB counter.
 *
 * Values:
 * - 0 - ETB counter disabled
 * - 1 - ETB counter enabled
 */
//@{
#define BP_MCM_ETBCC_CNTEN   (0U)          //!< Bit position for MCM_ETBCC_CNTEN.
#define BM_MCM_ETBCC_CNTEN   (0x00000001U) //!< Bit mask for MCM_ETBCC_CNTEN.
#define BS_MCM_ETBCC_CNTEN   (1U)          //!< Bit field size in bits for MCM_ETBCC_CNTEN.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_CNTEN field.
#define BR_MCM_ETBCC_CNTEN   (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_CNTEN))
#endif

//! @brief Format value for bitfield MCM_ETBCC_CNTEN.
#define BF_MCM_ETBCC_CNTEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_CNTEN), uint32_t) & BM_MCM_ETBCC_CNTEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the CNTEN field to a new value.
#define BW_MCM_ETBCC_CNTEN(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_CNTEN) = (v))
#endif
//@}

/*!
 * @name Register MCM_ETBCC, field RSPT[2:1] (RW)
 *
 * Values:
 * - 00 - No response when the ETB count expires
 * - 01 - Generate a normal interrupt when the ETB count expires
 * - 10 - Generate an NMI when the ETB count expires
 * - 11 - Generate a debug halt when the ETB count expires
 */
//@{
#define BP_MCM_ETBCC_RSPT    (1U)          //!< Bit position for MCM_ETBCC_RSPT.
#define BM_MCM_ETBCC_RSPT    (0x00000006U) //!< Bit mask for MCM_ETBCC_RSPT.
#define BS_MCM_ETBCC_RSPT    (2U)          //!< Bit field size in bits for MCM_ETBCC_RSPT.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_RSPT field.
#define BR_MCM_ETBCC_RSPT    (HW_MCM_ETBCC.B.RSPT)
#endif

//! @brief Format value for bitfield MCM_ETBCC_RSPT.
#define BF_MCM_ETBCC_RSPT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_RSPT), uint32_t) & BM_MCM_ETBCC_RSPT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RSPT field to a new value.
#define BW_MCM_ETBCC_RSPT(v) (HW_MCM_ETBCC_WR((HW_MCM_ETBCC_RD() & ~BM_MCM_ETBCC_RSPT) | BF_MCM_ETBCC_RSPT(v)))
#endif
//@}

/*!
 * @name Register MCM_ETBCC, field RLRQ[3] (RW)
 *
 * Reloads the ETB packet counter with the MCM_ETBRL RELOAD value. If IRQ or NMI
 * interrupts were enabled and an NMI or IRQ interrupt was generated on counter
 * expiration, setting this bit clears the pending NMI or IRQ interrupt request.
 * If debug halt was enabled and a debug halt request was asserted on counter
 * expiration, setting this bit clears the debug halt request.
 *
 * Values:
 * - 0 - No effect
 * - 1 - Clears pending debug halt, NMI, or IRQ interrupt requests
 */
//@{
#define BP_MCM_ETBCC_RLRQ    (3U)          //!< Bit position for MCM_ETBCC_RLRQ.
#define BM_MCM_ETBCC_RLRQ    (0x00000008U) //!< Bit mask for MCM_ETBCC_RLRQ.
#define BS_MCM_ETBCC_RLRQ    (1U)          //!< Bit field size in bits for MCM_ETBCC_RLRQ.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_RLRQ field.
#define BR_MCM_ETBCC_RLRQ    (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_RLRQ))
#endif

//! @brief Format value for bitfield MCM_ETBCC_RLRQ.
#define BF_MCM_ETBCC_RLRQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_RLRQ), uint32_t) & BM_MCM_ETBCC_RLRQ)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RLRQ field to a new value.
#define BW_MCM_ETBCC_RLRQ(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_RLRQ) = (v))
#endif
//@}

/*!
 * @name Register MCM_ETBCC, field ETDIS[4] (RW)
 *
 * Disables the trace path from ETM to TPIU.
 *
 * Values:
 * - 0 - ETM-to-TPIU trace path enabled
 * - 1 - ETM-to-TPIU trace path disabled
 */
//@{
#define BP_MCM_ETBCC_ETDIS   (4U)          //!< Bit position for MCM_ETBCC_ETDIS.
#define BM_MCM_ETBCC_ETDIS   (0x00000010U) //!< Bit mask for MCM_ETBCC_ETDIS.
#define BS_MCM_ETBCC_ETDIS   (1U)          //!< Bit field size in bits for MCM_ETBCC_ETDIS.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_ETDIS field.
#define BR_MCM_ETBCC_ETDIS   (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ETDIS))
#endif

//! @brief Format value for bitfield MCM_ETBCC_ETDIS.
#define BF_MCM_ETBCC_ETDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_ETDIS), uint32_t) & BM_MCM_ETBCC_ETDIS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ETDIS field to a new value.
#define BW_MCM_ETBCC_ETDIS(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ETDIS) = (v))
#endif
//@}

/*!
 * @name Register MCM_ETBCC, field ITDIS[5] (RW)
 *
 * Disables the trace path from ITM to TPIU.
 *
 * Values:
 * - 0 - ITM-to-TPIU trace path enabled
 * - 1 - ITM-to-TPIU trace path disabled
 */
//@{
#define BP_MCM_ETBCC_ITDIS   (5U)          //!< Bit position for MCM_ETBCC_ITDIS.
#define BM_MCM_ETBCC_ITDIS   (0x00000020U) //!< Bit mask for MCM_ETBCC_ITDIS.
#define BS_MCM_ETBCC_ITDIS   (1U)          //!< Bit field size in bits for MCM_ETBCC_ITDIS.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_ITDIS field.
#define BR_MCM_ETBCC_ITDIS   (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ITDIS))
#endif

//! @brief Format value for bitfield MCM_ETBCC_ITDIS.
#define BF_MCM_ETBCC_ITDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_ITDIS), uint32_t) & BM_MCM_ETBCC_ITDIS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ITDIS field to a new value.
#define BW_MCM_ETBCC_ITDIS(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ITDIS) = (v))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_ETBRL - ETB Reload register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_ETBRL - ETB Reload register (RW)
 *
 * Reset value: 0x00000000U
 */
typedef union _hw_mcm_etbrl
{
    uint32_t U;
    struct _hw_mcm_etbrl_bitfields
    {
        uint32_t RELOAD : 11;          //!< [10:0] Byte Count Reload Value
        uint32_t RESERVED0 : 21;       //!< [31:11]
    } B;
} hw_mcm_etbrl_t;
#endif

/*!
 * @name Constants and macros for entire MCM_ETBRL register
 */
//@{
#define HW_MCM_ETBRL_ADDR        (REGS_MCM_BASE + 0x18U)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBRL             (*(__IO hw_mcm_etbrl_t *) HW_MCM_ETBRL_ADDR)
#define HW_MCM_ETBRL_RD()        (HW_MCM_ETBRL.U)
#define HW_MCM_ETBRL_WR(v)       (HW_MCM_ETBRL.U = (v))
#define HW_MCM_ETBRL_SET(v)      (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() |  (v)))
#define HW_MCM_ETBRL_CLR(v)      (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() & ~(v)))
#define HW_MCM_ETBRL_TOG(v)      (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() ^  (v)))
#endif
//@}

/*
 * Constants & macros for individual MCM_ETBRL bitfields
 */

/*!
 * @name Register MCM_ETBRL, field RELOAD[10:0] (RW)
 *
 * Indicates the 0-mod-4 value the counter reloads to. Writing a non-0-mod-4
 * value to this field results in a bus error.
 */
//@{
#define BP_MCM_ETBRL_RELOAD  (0U)          //!< Bit position for MCM_ETBRL_RELOAD.
#define BM_MCM_ETBRL_RELOAD  (0x000007FFU) //!< Bit mask for MCM_ETBRL_RELOAD.
#define BS_MCM_ETBRL_RELOAD  (11U)         //!< Bit field size in bits for MCM_ETBRL_RELOAD.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBRL_RELOAD field.
#define BR_MCM_ETBRL_RELOAD  (HW_MCM_ETBRL.B.RELOAD)
#endif

//! @brief Format value for bitfield MCM_ETBRL_RELOAD.
#define BF_MCM_ETBRL_RELOAD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBRL_RELOAD), uint32_t) & BM_MCM_ETBRL_RELOAD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RELOAD field to a new value.
#define BW_MCM_ETBRL_RELOAD(v) (HW_MCM_ETBRL_WR((HW_MCM_ETBRL_RD() & ~BM_MCM_ETBRL_RELOAD) | BF_MCM_ETBRL_RELOAD(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_ETBCNT - ETB Counter Value register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_ETBCNT - ETB Counter Value register (RO)
 *
 * Reset value: 0x00000000U
 */
typedef union _hw_mcm_etbcnt
{
    uint32_t U;
    struct _hw_mcm_etbcnt_bitfields
    {
        uint32_t COUNTER : 11;         //!< [10:0] Byte Count Counter Value
        uint32_t RESERVED0 : 21;       //!< [31:11]
    } B;
} hw_mcm_etbcnt_t;
#endif

/*!
 * @name Constants and macros for entire MCM_ETBCNT register
 */
//@{
#define HW_MCM_ETBCNT_ADDR       (REGS_MCM_BASE + 0x1CU)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBCNT            (*(__I hw_mcm_etbcnt_t *) HW_MCM_ETBCNT_ADDR)
#define HW_MCM_ETBCNT_RD()       (HW_MCM_ETBCNT.U)
#endif
//@}

/*
 * Constants & macros for individual MCM_ETBCNT bitfields
 */

/*!
 * @name Register MCM_ETBCNT, field COUNTER[10:0] (RO)
 *
 * Indicates the current 0-mod-4 value of the counter.
 */
//@{
#define BP_MCM_ETBCNT_COUNTER (0U)         //!< Bit position for MCM_ETBCNT_COUNTER.
#define BM_MCM_ETBCNT_COUNTER (0x000007FFU) //!< Bit mask for MCM_ETBCNT_COUNTER.
#define BS_MCM_ETBCNT_COUNTER (11U)        //!< Bit field size in bits for MCM_ETBCNT_COUNTER.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCNT_COUNTER field.
#define BR_MCM_ETBCNT_COUNTER (HW_MCM_ETBCNT.B.COUNTER)
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_MCM_PID - Process ID register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_MCM_PID - Process ID register (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register drives the M0_PID and M1_PID values in the Memory Protection
 * Unit(MPU). System software loads this register before passing control to a given
 * user mode process. If the PID of the process does not match the value in this
 * register, a bus error occurs. See the MPU chapter for more details.
 */
typedef union _hw_mcm_pid
{
    uint32_t U;
    struct _hw_mcm_pid_bitfields
    {
        uint32_t PID : 8;              //!< [7:0] M0_PID And M1_PID For MPU
        uint32_t RESERVED0 : 24;       //!< [31:8]
    } B;
} hw_mcm_pid_t;
#endif

/*!
 * @name Constants and macros for entire MCM_PID register
 */
//@{
#define HW_MCM_PID_ADDR          (REGS_MCM_BASE + 0x30U)

#ifndef __LANGUAGE_ASM__
#define HW_MCM_PID               (*(__IO hw_mcm_pid_t *) HW_MCM_PID_ADDR)
#define HW_MCM_PID_RD()          (HW_MCM_PID.U)
#define HW_MCM_PID_WR(v)         (HW_MCM_PID.U = (v))
#define HW_MCM_PID_SET(v)        (HW_MCM_PID_WR(HW_MCM_PID_RD() |  (v)))
#define HW_MCM_PID_CLR(v)        (HW_MCM_PID_WR(HW_MCM_PID_RD() & ~(v)))
#define HW_MCM_PID_TOG(v)        (HW_MCM_PID_WR(HW_MCM_PID_RD() ^  (v)))
#endif
//@}

/*
 * Constants & macros for individual MCM_PID bitfields
 */

/*!
 * @name Register MCM_PID, field PID[7:0] (RW)
 *
 * Drives the M0_PID and M1_PID values in the MPU.
 */
//@{
#define BP_MCM_PID_PID       (0U)          //!< Bit position for MCM_PID_PID.
#define BM_MCM_PID_PID       (0x000000FFU) //!< Bit mask for MCM_PID_PID.
#define BS_MCM_PID_PID       (8U)          //!< Bit field size in bits for MCM_PID_PID.

#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PID_PID field.
#define BR_MCM_PID_PID       (HW_MCM_PID.B.PID)
#endif

//! @brief Format value for bitfield MCM_PID_PID.
#define BF_MCM_PID_PID(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_PID_PID), uint32_t) & BM_MCM_PID_PID)

#ifndef __LANGUAGE_ASM__
//! @brief Set the PID field to a new value.
#define BW_MCM_PID_PID(v)    (HW_MCM_PID_WR((HW_MCM_PID_RD() & ~BM_MCM_PID_PID) | BF_MCM_PID_PID(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// hw_mcm_t - module struct
//-------------------------------------------------------------------------------------------
/*!
 * @brief All MCM module registers.
 */
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_mcm
{
    uint8_t _reserved0[8];
    __I hw_mcm_plasc_t PLASC;              //!< [0x8] Crossbar Switch (AXBS) Slave Configuration
    __I hw_mcm_plamc_t PLAMC;              //!< [0xA] Crossbar Switch (AXBS) Master Configuration
    __IO hw_mcm_cr_t CR;                   //!< [0xC] Control Register
    __IO hw_mcm_isr_t ISR;                 //!< [0x10] Interrupt Status Register
    __IO hw_mcm_etbcc_t ETBCC;             //!< [0x14] ETB Counter Control register
    __IO hw_mcm_etbrl_t ETBRL;             //!< [0x18] ETB Reload register
    __I hw_mcm_etbcnt_t ETBCNT;            //!< [0x1C] ETB Counter Value register
    uint8_t _reserved1[16];
    __IO hw_mcm_pid_t PID;                 //!< [0x30] Process ID register
} hw_mcm_t;
#pragma pack()

//! @brief Macro to access all MCM registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//!     use the '&' operator, like <code>&HW_MCM</code>.
#define HW_MCM         (*(hw_mcm_t *) REGS_MCM_BASE)
#endif

#endif // __HW_MCM_REGISTERS_H__
// v22/130726/0.9
// EOF