Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/i2c/fsl_i2c_features.h

Revision:

82:6473597d706e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/i2c/fsl_i2c_features.h	Mon Apr 07 18:28:36 2014 +0100
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#if !defined(__FSL_I2C_FEATURES_H__)
+#define __FSL_I2C_FEATURES_H__
+
+#if defined(CPU_MK20DX128VMP5) || defined(CPU_MK20DN128VMP5) || defined(CPU_MK20DX64VMP5) || defined(CPU_MK20DN64VMP5) || \
+    defined(CPU_MK20DX32VMP5) || defined(CPU_MK20DN32VMP5) || defined(CPU_MK20DX128VLH5) || defined(CPU_MK20DN128VLH5) || \
+    defined(CPU_MK20DX64VLH5) || defined(CPU_MK20DN64VLH5) || defined(CPU_MK20DX32VLH5) || defined(CPU_MK20DN32VLH5) || \
+    defined(CPU_MK20DX128VFM5) || defined(CPU_MK20DN128VFM5) || defined(CPU_MK20DX64VFM5) || defined(CPU_MK20DN64VFM5) || \
+    defined(CPU_MK20DX32VFM5) || defined(CPU_MK20DN32VFM5) || defined(CPU_MK20DX128VFT5) || defined(CPU_MK20DN128VFT5) || \
+    defined(CPU_MK20DX64VFT5) || defined(CPU_MK20DN64VFT5) || defined(CPU_MK20DX32VFT5) || defined(CPU_MK20DN32VFT5) || \
+    defined(CPU_MK20DX128VLF5) || defined(CPU_MK20DN128VLF5) || defined(CPU_MK20DX64VLF5) || defined(CPU_MK20DN64VLF5) || \
+    defined(CPU_MK20DX32VLF5) || defined(CPU_MK20DN32VLF5) || defined(CPU_MK70FN1M0VMF12) || defined(CPU_MK70FX512VMF12) || \
+    defined(CPU_MK70FN1M0VMF15) || defined(CPU_MK70FX512VMF15) || defined(CPU_MK70FN1M0VMJ12) || defined(CPU_MK70FX512VMJ12) || \
+    defined(CPU_MK70FN1M0VMJ15) || defined(CPU_MK70FX512VMJ15)
+    /* @brief Has I2C bus stop detection (register bit FLT[STOPF]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT (0)
+    /* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH).*/
+    #define FSL_FEATURE_I2C_HAS_SMBUS (1)
+    /* @brief Maximum supported baud rate in kilobit per second.*/
+    #define FSL_FEATURE_I2C_MAX_BAUD_KBPS (400)
+    /* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value).*/
+    #define FSL_FEATURE_I2C_HAS_ERRATA_6070 (0)
+    /* @brief Has DMA support (register bit C1[DMAEN]).*/
+    #define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1)
+    /* @brief Has I2C bus start detection (register bits FLT[STARTF] and FLT[SSIE]).*/
+    #define FSL_FEATURE_I2C_HAS_START_DETECT (0)
+    /* @brief Has I2C bus stop detection interrupt (register bit FLT[STOPIE]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT_INTERRUPT (0)
+    /* @brief Has I2C bus stop hold off (register bit FLT[SHEN]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (0)
+    /* @brief Maximum width of the glitch filter in number of bus clocks.*/
+    #define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (31)
+    /* @brief Has control of the drive capability of the I2C pins.*/
+    #define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1)
+#elif defined(CPU_MK22FN256VDC12) || defined(CPU_MK22FN256VLH12) || defined(CPU_MK22FN256VLL12) || defined(CPU_MK22FN256VMP12) || \
+    defined(CPU_MK22FN512VDC12) || defined(CPU_MK22FN512VLH12) || defined(CPU_MK22FN512VLL12) || defined(CPU_MK24FN1M0VDC12) || \
+    defined(CPU_MK24FN1M0VLQ12) || defined(CPU_MK63FN1M0VLQ12) || defined(CPU_MK63FN1M0VMD12) || defined(CPU_MK64FN1M0VDC12) || \
+    defined(CPU_MK64FN1M0VLL12) || defined(CPU_MK64FN1M0VLQ12) || defined(CPU_MK64FX512VLQ12) || defined(CPU_MK64FN1M0VMD12) || \
+    defined(CPU_MK64FX512VMD12) || defined(CPU_MK65FN2M0CAC18) || defined(CPU_MK65FX1M0CAC18) || defined(CPU_MK65FN2M0VMI18) || \
+    defined(CPU_MK65FX1M0VMI18) || defined(CPU_MK66FN2M0VLQ18) || defined(CPU_MK66FX1M0VLQ18) || defined(CPU_MK66FN2M0VMD18) || \
+    defined(CPU_MK66FX1M0VMD18) || defined(CPU_MKV31F256VLH12) || defined(CPU_MKV31F256VLL12) || defined(CPU_MKV31FN512VLH12) || \
+    defined(CPU_MKV31F512VLL12)
+    /* @brief Has I2C bus stop detection (register bit FLT[STOPF]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT (1)
+    /* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH).*/
+    #define FSL_FEATURE_I2C_HAS_SMBUS (1)
+    /* @brief Maximum supported baud rate in kilobit per second.*/
+    #define FSL_FEATURE_I2C_MAX_BAUD_KBPS (400)
+    /* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value).*/
+    #define FSL_FEATURE_I2C_HAS_ERRATA_6070 (0)
+    /* @brief Has DMA support (register bit C1[DMAEN]).*/
+    #define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1)
+    /* @brief Has I2C bus start detection (register bits FLT[STARTF] and FLT[SSIE]).*/
+    #define FSL_FEATURE_I2C_HAS_START_DETECT (1)
+    /* @brief Has I2C bus stop detection interrupt (register bit FLT[STOPIE]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT_INTERRUPT (0)
+    /* @brief Has I2C bus stop hold off (register bit FLT[SHEN]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (1)
+    /* @brief Maximum width of the glitch filter in number of bus clocks.*/
+    #define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (15)
+    /* @brief Has control of the drive capability of the I2C pins.*/
+    #define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1)
+#elif defined(CPU_MKL05Z8VFK4) || defined(CPU_MKL05Z16VFK4) || defined(CPU_MKL05Z32VFK4) || defined(CPU_MKL05Z8VLC4) || \
+    defined(CPU_MKL05Z16VLC4) || defined(CPU_MKL05Z32VLC4) || defined(CPU_MKL05Z8VFM4) || defined(CPU_MKL05Z16VFM4) || \
+    defined(CPU_MKL05Z32VFM4) || defined(CPU_MKL05Z16VLF4) || defined(CPU_MKL05Z32VLF4) || defined(CPU_MKL25Z32VFM4) || \
+    defined(CPU_MKL25Z64VFM4) || defined(CPU_MKL25Z128VFM4) || defined(CPU_MKL25Z32VFT4) || defined(CPU_MKL25Z64VFT4) || \
+    defined(CPU_MKL25Z128VFT4) || defined(CPU_MKL25Z32VLH4) || defined(CPU_MKL25Z64VLH4) || defined(CPU_MKL25Z128VLH4) || \
+    defined(CPU_MKL25Z32VLK4) || defined(CPU_MKL25Z64VLK4) || defined(CPU_MKL25Z128VLK4)
+    /* @brief Has I2C bus stop detection (register bit FLT[STOPF]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT (1)
+    /* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH).*/
+    #define FSL_FEATURE_I2C_HAS_SMBUS (1)
+    /* @brief Maximum supported baud rate in kilobit per second.*/
+    #define FSL_FEATURE_I2C_MAX_BAUD_KBPS (400)
+    /* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value).*/
+    #define FSL_FEATURE_I2C_HAS_ERRATA_6070 (1)
+    /* @brief Has DMA support (register bit C1[DMAEN]).*/
+    #define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1)
+    /* @brief Has I2C bus start detection (register bits FLT[STARTF] and FLT[SSIE]).*/
+    #define FSL_FEATURE_I2C_HAS_START_DETECT (0)
+    /* @brief Has I2C bus stop detection interrupt (register bit FLT[STOPIE]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT_INTERRUPT (1)
+    /* @brief Has I2C bus stop hold off (register bit FLT[SHEN]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (1)
+    /* @brief Maximum width of the glitch filter in number of bus clocks.*/
+    #define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (31)
+    /* @brief Has control of the drive capability of the I2C pins.*/
+    #define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1)
+#elif defined(CPU_MKL46Z128VLH4) || defined(CPU_MKL46Z256VLH4) || defined(CPU_MKL46Z128VLL4) || defined(CPU_MKL46Z256VLL4) || \
+    defined(CPU_MKL46Z128VMC4) || defined(CPU_MKL46Z256VMC4)
+    /* @brief Has I2C bus stop detection (register bit FLT[STOPF]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT (1)
+    /* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH).*/
+    #define FSL_FEATURE_I2C_HAS_SMBUS (1)
+    /* @brief Maximum supported baud rate in kilobit per second.*/
+    #define FSL_FEATURE_I2C_MAX_BAUD_KBPS (100)
+    /* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value).*/
+    #define FSL_FEATURE_I2C_HAS_ERRATA_6070 (1)
+    /* @brief Has DMA support (register bit C1[DMAEN]).*/
+    #define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1)
+    /* @brief Has I2C bus start detection (register bits FLT[STARTF] and FLT[SSIE]).*/
+    #define FSL_FEATURE_I2C_HAS_START_DETECT (0)
+    /* @brief Has I2C bus stop detection interrupt (register bit FLT[STOPIE]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_DETECT_INTERRUPT (1)
+    /* @brief Has I2C bus stop hold off (register bit FLT[SHEN]).*/
+    #define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (1)
+    /* @brief Maximum width of the glitch filter in number of bus clocks.*/
+    #define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (31)
+    /* @brief Has control of the drive capability of the I2C pins.*/
+    #define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1)
+#else
+    #error "No valid CPU defined!"
+#endif
+
+#endif /* __FSL_I2C_FEATURES_H__*/
+/*******************************************************************************
+ * EOF
+ ******************************************************************************/
+