Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.

Dependents:   1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB

Fork of mbed by mbed official

Revision:
71:8fabd470bb6e
Parent:
70:673126e12c73
Child:
72:4096f863f923
--- a/TARGET_LPC4088_EA/PeripheralNames.h	Mon Nov 18 22:09:31 2013 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,88 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    UART_0 = (int)LPC_UART0_BASE,
-    UART_1 = (int)LPC_UART1_BASE,
-    UART_2 = (int)LPC_UART2_BASE,
-    UART_3 = (int)LPC_UART3_BASE,
-    UART_4 = (int)LPC_UART4_BASE
-} UARTName;
-
-typedef enum {
-    ADC0_0 = 0,
-    ADC0_1,
-    ADC0_2,
-    ADC0_3,
-    ADC0_4,
-    ADC0_5,
-    ADC0_6,
-    ADC0_7
-} ADCName;
-
-typedef enum {
-    DAC_0 = 0
-} DACName;
-
-typedef enum {
-    SPI_0 = (int)LPC_SSP0_BASE,
-    SPI_1 = (int)LPC_SSP1_BASE,
-    SPI_2 = (int)LPC_SSP2_BASE
-} SPIName;
-
-typedef enum {
-    I2C_0 = (int)LPC_I2C0_BASE,
-    I2C_1 = (int)LPC_I2C1_BASE,
-    I2C_2 = (int)LPC_I2C2_BASE
-} I2CName;
-
-typedef enum {
-    PWM0_1 = 1,
-    PWM0_2,
-    PWM0_3,
-    PWM0_4,
-    PWM0_5,
-    PWM0_6,
-    PWM1_1,
-    PWM1_2,
-    PWM1_3,
-    PWM1_4,
-    PWM1_5,
-    PWM1_6
-} PWMName;
-
-typedef enum {
-     CAN_1 = (int)LPC_CAN1_BASE,
-     CAN_2 = (int)LPC_CAN2_BASE
-} CANName;
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-#define STDIO_UART        UART_0
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif