Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_usart.h
- Revision:
- 96:487b796308b0
- Parent:
- 92:4fc01daae5a5
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_usart.h Wed Mar 04 07:31:39 2015 +0100
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_usart.h Tue Mar 17 14:27:45 2015 +0000
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l0xx_hal_usart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 18-June-2014
+ * @version V1.2.0
+ * @date 06-February-2015
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -56,11 +56,21 @@
* @{
*/
-/** @addtogroup USART
+/** @defgroup USART USART (Synchronous UART)
* @{
*/
-/* Exported types ------------------------------------------------------------*/
+/******************************************************************************/
+/* Exported types ------------------------------------------------------------*/
+/******************************************************************************/
+
+ /** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/** @defgroup USART_Init_Configuration USART initialization configuration structure
+ * @{
+ */
/**
* @brief USART Init Structure definition
*/
@@ -97,6 +107,13 @@
This parameter can be a value of @ref USART_Last_Bit */
}USART_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup USART_State_Definition USART state definition
+ * @{
+ */
/**
* @brief HAL State structures definition
*/
@@ -111,20 +128,29 @@
HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
HAL_USART_STATE_ERROR = 0x04 /*!< Error */
}HAL_USART_StateTypeDef;
-
+/**
+ * @}
+ */
+/** @defgroup USART_Error_Definition USART error definition
+ * @{
+ */
/**
- * @brief HAL USART Error Code structure definition
+ * @brief HAL USART Error Code definition
*/
-typedef enum
-{
- HAL_USART_ERROR_NONE = 0x00, /*!< No error */
- HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_USART_ERROR_FE = 0x04, /*!< frame error */
- HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_USART_ErrorTypeDef;
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x04) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */
+
+/**
+ * @}
+ */
+/** @defgroup USART_Clock_SourceDefinition USART clock source definition
+ * @{
+ */
/**
* @brief USART clock sources definitions
*/
@@ -136,15 +162,16 @@
USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
USART_CLOCKSOURCE_LSE = 0x08 /*!< LSE clock source */
}USART_ClockSourceTypeDef;
-
-
-/**
- * @brief HAL USART Error Code structure definition
- */
-
+/**
+ * @}
+ */
+/** @defgroup USART_handle_Definition Handle structure definition
+ * @{
+ */
/**
* @brief USART handle Structure definition
- */
+ */
+
typedef struct
{
USART_TypeDef *Instance; /*!< USART registers base address */
@@ -173,17 +200,22 @@
__IO HAL_USART_StateTypeDef State; /*!< Usart communication state */
- __IO HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+ __IO uint32_t ErrorCode; /*!< USART Error code */
}USART_HandleTypeDef;
-
+/**
+ * @}
+ */
+/**
+ * @}
+ */
/* Exported constants --------------------------------------------------------*/
-/** @defgroup USART_Exported_Constants
+/** @defgroup USART_Exported_Constants USART Exported Constants
* @{
*/
-/** @defgroup USART_Stop_Bits
+/** @defgroup USART_Stop_Bits USART stop bit definition
* @{
*/
#define USART_STOPBITS_1 ((uint32_t)0x0000)
@@ -198,7 +230,7 @@
* @}
*/
-/** @defgroup USART_Parity
+/** @defgroup USART_Parity USART parity definition
* @{
*/
#define USART_PARITY_NONE ((uint32_t)0x0000)
@@ -211,29 +243,31 @@
* @}
*/
-/** @defgroup USART_Mode
+/** @defgroup USART_Mode USART mode definition
* @{
*/
#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+#define IS_USART_MODE(MODE) (((MODE) == USART_MODE_RX) || \
+ ((MODE) == USART_MODE_TX) || \
+ ((MODE) == USART_MODE_TX_RX))
/**
* @}
*/
-/** @defgroup USART_Clock
+/** @defgroup USART_Clock USART clock activation definition
* @{
*/
-#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
-#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
-#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
- ((CLOCK) == USART_CLOCK_ENABLED))
+#define USART_CLOCK_DISABLE ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
+ ((CLOCK) == USART_CLOCK_ENABLE))
/**
* @}
*/
-/** @defgroup USART_Clock_Polarity
+/** @defgroup USART_Clock_Polarity USART polarity level definition
* @{
*/
#define USART_POLARITY_LOW ((uint32_t)0x0000)
@@ -243,7 +277,7 @@
* @}
*/
-/** @defgroup USART_Clock_Phase
+/** @defgroup USART_Clock_Phase USART clock phase definition
* @{
*/
#define USART_PHASE_1EDGE ((uint32_t)0x0000)
@@ -253,7 +287,7 @@
* @}
*/
-/** @defgroup USART_Last_Bit
+/** @defgroup USART_Last_Bit USART last bit activation definition
* @{
*/
#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
@@ -265,7 +299,7 @@
*/
-/** @defgroup USART_Flags
+/** @defgroup USART_Flags USART flag definitions
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the ISR register
* @{
@@ -288,7 +322,7 @@
* @}
*/
-/** @defgroup USART_Interrupt_definition
+/** @defgroup USART_Interrupt_definition USART interrupt definition
* Elements values convention: 0000ZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
@@ -313,7 +347,7 @@
* @}
*/
-/** @defgroup USART_IT_CLEAR_Flags
+/** @defgroup USART_IT_CLEAR_Flags USART interrupt clear flags definition
* @{
*/
#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
@@ -327,7 +361,7 @@
* @}
*/
-/** @defgroup USART_Request_Parameters
+/** @defgroup USART_Request_Parameters USART request parameter definition
* @{
*/
#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
@@ -338,7 +372,7 @@
* @}
*/
-/** @defgroup USART_Interruption_Mask
+/** @defgroup USART_Interruption_Mask USART interruption mask definition
* @{
*/
#define USART_IT_MASK ((uint16_t)0x001F)
@@ -353,16 +387,27 @@
/* Exported macro ------------------------------------------------------------*/
-/** @defgroup USART_Exported_Macros
+/** @defgroup USART_Exported_Macros USART Exported Macros
* @{
*/
/** @brief Reset USART handle state
- * @param __HANDLE__: specifies the UART Handle.
+ * @param __HANDLE__: specifies the USART Handle.
* The Handle Instance which can be USART1 or USART2.
* @retval None
*/
#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+/** @brief Flush the USART Data registers
+ * @param __HANDLE__: specifies the USART Handle.
+ */
+#define __HAL_USART_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, USART_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, USART_TXDATA_FLUSH_REQUEST); \
+ } while(0)
+
+
+
/** @brief Checks whether the specified USART flag is set or not.
* @param __HANDLE__: specifies the USART Handle which can be USART1 or USART2.
* @param __FLAG__: specifies the flag to check.
@@ -383,6 +428,55 @@
*/
#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+/** @brief Clears the specified USART pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_CLEAR_PEF
+ * @arg USART_CLEAR_FEF
+ * @arg USART_CLEAR_NEF
+ * @arg USART_CLEAR_OREF
+ * @arg USART_CLEAR_IDLEF
+ * @arg USART_CLEAR_TCF
+ * @arg USART_CLEAR_LBDF
+ * @arg USART_CLEAR_CTSF
+ * @arg USART_CLEAR_RTOF
+ * @arg USART_CLEAR_EOBF
+ * @arg USART_CLEAR_CMF
+ * @arg USART_CLEAR_WUF
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG(__HANDLE__,USART_CLEAR_PEF)
+
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG(__HANDLE__,USART_CLEAR_FEF)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG(__HANDLE__,USART_CLEAR_NEF)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG(__HANDLE__,USART_CLEAR_OREF)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG(__HANDLE__,USART_CLEAR_IDLEF)
/** @brief Enables the specified USART interrupt.
* @param __HANDLE__: specifies the USART Handle which can be USART1 or USART2.
@@ -476,7 +570,19 @@
*
* @retval None
*/
-#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
+
+/** @brief Enables the USART one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disables the UART one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
/** @brief Enable USART
* @param __HANDLE__: specifies the USART Handle.
@@ -505,17 +611,27 @@
* @}
*/
-/* Include UART HAL Extension module */
+/* Include USART HAL Extension module */
#include "stm32l0xx_hal_usart_ex.h"
/* Exported functions --------------------------------------------------------*/
-
+/** @defgroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
/* Initialization/de-initialization functions ********************************/
+/** @defgroup USART_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @{
+ */
HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
-void HAL_USART_SetConfig(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
/* IO operation functions *****************************************************/
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
@@ -535,15 +651,25 @@
void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
-
+/**
+ * @}
+ */
+/* IO operation functions *****************************************************/
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
/* Peripheral State functions ************************************************/
HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
-
+/**
+ * @}
+ */
+/**
+ * @}
+ */
/**
* @}
*/
-
/**
* @}
*/
@@ -555,3 +681,4 @@
#endif /* __STM32L0xx_HAL_USART_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+