Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F103RB/stm32f1xx_hal_rcc_ex.h
- Revision:
- 96:487b796308b0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F103RB/stm32f1xx_hal_rcc_ex.h Tue Mar 17 14:27:45 2015 +0000
@@ -0,0 +1,1895 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 15-December-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_RCC_EX_H
+#define __STM32F1xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+
+/* Alias word address of PLLI2SON bit */
+#define PLLI2SON_BITNUMBER POSITION_VAL(RCC_CR_PLL3ON)
+#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLLI2SON_BITNUMBER * 4)))
+
+/** @defgroup RCCEx_PLL_Timeout PLL I2S Timeout
+ * @{
+ */
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+/**
+ * @}
+ */
+
+#endif /* STM32F105xC || STM32F107xC */
+
+#define CR_REG_INDEX ((uint8_t)1)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx_Private_Macros
+ * @{
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define IS_RCC_PREDIV1_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_PREDIV1_SOURCE_HSE) || \
+ ((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2))
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV7) || ((__DIV__) == RCC_HSE_PREDIV_DIV8) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV9) || ((__DIV__) == RCC_HSE_PREDIV_DIV10) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV11) || ((__DIV__) == RCC_HSE_PREDIV_DIV12) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV13) || ((__DIV__) == RCC_HSE_PREDIV_DIV14) || \
+ ((__DIV__) == RCC_HSE_PREDIV_DIV15) || ((__DIV__) == RCC_HSE_PREDIV_DIV16))
+
+#else
+#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2))
+#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
+ ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
+ ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
+ ((__MUL__) == RCC_PLL_MUL6_5))
+
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_PLL2CLK) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK_DIV2) || ((__SOURCE__) == RCC_MCO1SOURCE_EXT_HSE) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK))
+
+#else
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \
+ ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
+ ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
+ ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
+ ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \
+ ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \
+ ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \
+ ((__MUL__) == RCC_PLL_MUL16))
+
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \
+ || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK))
+
+#endif /* STM32F105xC || STM32F107xC*/
+
+#define IS_RCC_ADCPLLCLK_DIV(__ADCCLK__) (((__ADCCLK__) == RCC_ADCPCLK2_DIV2) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV4) || \
+ ((__ADCCLK__) == RCC_ADCPCLK2_DIV6) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV8))
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLLI2S_VCO))
+
+#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO))
+
+#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBPLLCLK_DIV2) || ((__USBCLK__) == RCC_USBPLLCLK_DIV3))
+
+#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \
+ ((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \
+ ((__MUL__) == RCC_PLLI2S_MUL12) || ((__MUL__) == RCC_PLLI2S_MUL13) || \
+ ((__MUL__) == RCC_PLLI2S_MUL14) || ((__MUL__) == RCC_PLLI2S_MUL16) || \
+ ((__MUL__) == RCC_PLLI2S_MUL20))
+
+#define IS_RCC_HSE_PREDIV2(__DIV__) (((__DIV__) == RCC_HSE_PREDIV2_DIV1) || ((__DIV__) == RCC_HSE_PREDIV2_DIV2) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV3) || ((__DIV__) == RCC_HSE_PREDIV2_DIV4) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV5) || ((__DIV__) == RCC_HSE_PREDIV2_DIV6) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV7) || ((__DIV__) == RCC_HSE_PREDIV2_DIV8) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV9) || ((__DIV__) == RCC_HSE_PREDIV2_DIV10) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV11) || ((__DIV__) == RCC_HSE_PREDIV2_DIV12) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV13) || ((__DIV__) == RCC_HSE_PREDIV2_DIV14) || \
+ ((__DIV__) == RCC_HSE_PREDIV2_DIV15) || ((__DIV__) == RCC_HSE_PREDIV2_DIV16))
+
+#define IS_RCC_PLL2(__PLL__) (((__PLL__) == RCC_PLL2_NONE) || ((__PLL__) == RCC_PLL2_OFF) || \
+ ((__PLL__) == RCC_PLL2_ON))
+
+#define IS_RCC_PLL2_MUL(__MUL__) (((__MUL__) == RCC_PLL2_MUL8) || ((__MUL__) == RCC_PLL2_MUL9) || \
+ ((__MUL__) == RCC_PLL2_MUL10) || ((__MUL__) == RCC_PLL2_MUL11) || \
+ ((__MUL__) == RCC_PLL2_MUL12) || ((__MUL__) == RCC_PLL2_MUL13) || \
+ ((__MUL__) == RCC_PLL2_MUL14) || ((__MUL__) == RCC_PLL2_MUL16) || \
+ ((__MUL__) == RCC_PLL2_MUL20))
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
+
+#elif defined(STM32F103xE) || defined(STM32F103xG)
+
+#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)
+
+#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
+
+
+#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
+
+#else
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC))
+
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+
+#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBPLLCLK_DIV1) || ((__USBCLK__) == RCC_USBPLLCLK_DIV1_5))
+
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/**
+ * @brief RCC PLL2 configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLL2State; /*!< The new state of the PLL2.
+ This parameter can be a value of @ref RCCEx_PLL2_Config */
+
+ uint32_t PLL2MUL; /*!< PLL2MUL: Multiplication factor for PLL2 VCO input clock
+ This parameter must be a value of @ref RCCEx_PLL2_Multiplication_Factor*/
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value.
+ This parameter can be a value of @ref RCCEx_Prediv2_Factor */
+
+#endif /* STM32F105xC || STM32F107xC */
+} RCC_PLL2InitTypeDef;
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ uint32_t Prediv1Source; /*!< The Prediv1 source value.
+ This parameter can be a value of @ref RCCEx_Prediv1_Source */
+#endif /* STM32F105xC || STM32F107xC */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref __HAL_RCC_HSE_CONFIG */
+
+ uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM)
+ This parameter can be a value of @ref RCCEx_Prediv1_Factor */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref __HAL_RCC_LSE_CONFIG */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ RCC_PLL2InitTypeDef PLL2; /*!< PLL2 structure parameters */
+#endif /* STM32F105xC || STM32F107xC */
+} RCC_OscInitTypeDef;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/**
+ * @brief RCC PLLI2S configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SMUL; /*!< PLLI2SMUL: Multiplication factor for PLLI2S VCO input clock
+ This parameter must be a value of @ref RCCEx_PLLI2S_Multiplication_Factor*/
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value.
+ This parameter can be a value of @ref RCCEx_Prediv2_Factor */
+
+#endif /* STM32F105xC || STM32F107xC */
+} RCC_PLLI2SInitTypeDef;
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< specifies the RTC clock source.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t AdcClockSelection; /*!< ADC clock source
+ This parameter can be a value of @ref RCCEx_ADC_Prescaler */
+
+#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+ uint32_t I2s2ClockSelection; /*!< I2S2 clock source
+ This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */
+
+ uint32_t I2s3ClockSelection; /*!< I2S3 clock source
+ This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */
+
+#if defined (STM32F105xC) || defined (STM32F107xC)
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */
+
+#endif /* STM32F105xC || STM32F107xC */
+#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
+ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Prescaler */
+
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+} RCC_PeriphCLKInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection
+ * @{
+ */
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_ADC ((uint32_t)0x00000002)
+#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+#define RCC_PERIPHCLK_I2S2 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2S3 ((uint32_t)0x00000008)
+#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
+ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00000010)
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC_Prescaler ADC Prescaler
+ * @{
+ */
+#define RCC_ADCPCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADCPCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADCPCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADCPCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+/**
+ * @}
+ */
+
+#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source
+ * @{
+ */
+#define RCC_I2S2CLKSOURCE_SYSCLK ((uint32_t)0x00000000)
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define RCC_I2S2CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S2SRC
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S3_Clock_Source I2S3 Clock Source
+ * @{
+ */
+#define RCC_I2S3CLKSOURCE_SYSCLK ((uint32_t)0x00000000)
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define RCC_I2S3CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S3SRC
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+
+/** @defgroup RCCEx_USB_Prescaler USB Prescaler
+ * @{
+ */
+#define RCC_USBPLLCLK_DIV1 RCC_CFGR_USBPRE
+#define RCC_USBPLLCLK_DIV1_5 ((uint32_t)0x00000000)
+
+/**
+ * @}
+ */
+
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_USB_Prescaler USB Prescaler
+ * @{
+ */
+#define RCC_USBPLLCLK_DIV2 RCC_CFGR_OTGFSPRE
+#define RCC_USBPLLCLK_DIV3 ((uint32_t)0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2S_Multiplication_Factor PLLI2S Multiplication Factor
+ * @{
+ */
+
+#define RCC_PLLI2S_MUL8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */
+#define RCC_PLLI2S_MUL9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */
+#define RCC_PLLI2S_MUL10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */
+#define RCC_PLLI2S_MUL11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */
+#define RCC_PLLI2S_MUL12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */
+#define RCC_PLLI2S_MUL13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */
+#define RCC_PLLI2S_MUL14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */
+#define RCC_PLLI2S_MUL16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */
+#define RCC_PLLI2S_MUL20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */
+
+/**
+ * @}
+ */
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_Prediv1_Source Prediv1 Source
+ * @{
+ */
+
+#define RCC_PREDIV1_SOURCE_HSE RCC_CFGR2_PREDIV1SRC_HSE
+#define RCC_PREDIV1_SOURCE_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2
+
+/**
+ * @}
+ */
+#endif /* STM32F105xC || STM32F107xC */
+
+/** @defgroup RCCEx_Prediv1_Factor HSE Prediv1 Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV_DIV1 ((uint32_t)0x00000000)
+
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2
+#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3
+#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4
+#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV1_DIV5
+#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV1_DIV6
+#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV1_DIV7
+#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV1_DIV8
+#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV1_DIV9
+#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV1_DIV10
+#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV1_DIV11
+#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV1_DIV12
+#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV1_DIV13
+#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV1_DIV14
+#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV1_DIV15
+#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV1_DIV16
+#else
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR_PLLXTPRE
+#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_Prediv2_Factor HSE Prediv2 Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV2_DIV1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */
+#define RCC_HSE_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */
+#define RCC_HSE_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */
+#define RCC_HSE_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */
+#define RCC_HSE_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */
+#define RCC_HSE_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */
+#define RCC_HSE_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */
+#define RCC_HSE_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */
+#define RCC_HSE_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */
+#define RCC_HSE_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */
+#define RCC_HSE_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */
+#define RCC_HSE_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */
+#define RCC_HSE_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */
+#define RCC_HSE_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */
+#define RCC_HSE_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */
+#define RCC_HSE_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLL2_Config PLL Config
+ * @{
+ */
+#define RCC_PLL2_NONE ((uint32_t)0x00000000)
+#define RCC_PLL2_OFF ((uint32_t)0x00000001)
+#define RCC_PLL2_ON ((uint32_t)0x00000002)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLL2_Multiplication_Factor PLL2 Multiplication Factor
+ * @{
+ */
+
+#define RCC_PLL2_MUL8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */
+#define RCC_PLL2_MUL9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */
+#define RCC_PLL2_MUL10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */
+#define RCC_PLL2_MUL11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */
+#define RCC_PLL2_MUL12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */
+#define RCC_PLL2_MUL13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */
+#define RCC_PLL2_MUL14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */
+#define RCC_PLL2_MUL16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */
+#define RCC_PLL2_MUL20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/** @defgroup RCCEx_PLL_Multiplication_Factor PLL Multiplication Factor
+ * @{
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#else
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMULL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMULL3
+#endif /* STM32F105xC || STM32F107xC */
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMULL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMULL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMULL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMULL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMULL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMULL9
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define RCC_PLL_MUL6_5 RCC_CFGR_PLLMULL6_5
+#else
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMULL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMULL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMULL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMULL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMULL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMULL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMULL16
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCO1_Clock_Source MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)RCC_CFGR_MCO_NOCLOCK)
+#define RCC_MCO1SOURCE_SYSCLK ((uint32_t)RCC_CFGR_MCO_SYSCLK)
+#define RCC_MCO1SOURCE_HSI ((uint32_t)RCC_CFGR_MCO_HSI)
+#define RCC_MCO1SOURCE_HSE ((uint32_t)RCC_CFGR_MCO_HSE)
+#define RCC_MCO1SOURCE_PLLCLK ((uint32_t)RCC_CFGR_MCO_PLLCLK_DIV2)
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define RCC_MCO1SOURCE_PLL2CLK ((uint32_t)RCC_CFGR_MCO_PLL2CLK)
+#define RCC_MCO1SOURCE_PLL3CLK_DIV2 ((uint32_t)RCC_CFGR_MCO_PLL3CLK_DIV2)
+#define RCC_MCO1SOURCE_EXT_HSE ((uint32_t)RCC_CFGR_MCO_EXT_HSE)
+#define RCC_MCO1SOURCE_PLL3CLK ((uint32_t)RCC_CFGR_MCO_PLL3CLK)
+#endif /* STM32F105xC || STM32F107xC*/
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_Interrupt RCCEx Interrupt
+ * @{
+ */
+#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF)
+#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Flag RCCEx Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XX : Register index
+ * - 01: CR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_PLL2RDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL2RDY)))
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL3RDY)))
+/**
+ * @}
+ */
+#endif /* STM32F105xC || STM32F107xC*/
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
+ defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F100xE)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined (STM32F100xE)
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
+
+#if defined (STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SDIOEN))
+#endif /* STM32F103xE || STM32F103xG */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_OTGFSEN))
+#endif /* STM32F105xC || STM32F107xC*/
+
+#if defined(STM32F107xC)
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACRXEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+
+#endif /* STM32F107xC*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
+ defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F100xE)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined (STM32F100xE)
+#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET)
+#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET)
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
+#if defined (STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET)
+#endif /* STM32F103xE || STM32F103xG */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) == RESET)
+#endif /* STM32F105xC || STM32F107xC*/
+#if defined(STM32F107xC)
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) == RESET)
+#endif /* STM32F107xC*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) ||defined (STM32F107xC)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
+ defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
+ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F100xB || STM32F100xE */
+
+#ifdef STM32F100xE
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#endif /* STM32F100xE */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#endif /* STM32F101xG || STM32F103xG*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) ||defined (STM32F107xC)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
+ defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
+ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
+#if defined(STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#endif /* STM32F100xB || STM32F100xE */
+#ifdef STM32F100xE
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#endif /* STM32F100xE */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#endif /* STM32F105xC || STM32F107xC */
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#endif /* STM32F101xG || STM32F103xG*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
+ defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
+
+#if defined (STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#endif /* STM32F100xB || STM32F100xE */
+
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
+ defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN))
+#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#endif /* STM32F103xE || STM32F103xG */
+
+#if defined (STM32F100xE)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN))
+#endif /* STM32F100xE */
+
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+#endif /* STM32F101xG || STM32F103xG */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
+ defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
+#if defined (STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
+#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET)
+#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
+#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
+#endif /* STM32F100xB || STM32F100xE */
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
+ defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET)
+#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET)
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#endif /* STM32F103xE || STM32F103xG */
+#if defined (STM32F100xE)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET)
+#endif /* STM32F100xE */
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+#endif /* STM32F101xG || STM32F103xG */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_Peripheral_Clock_Force_Release Peripheral Clock Force Release
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST))
+#if defined(STM32F107xC)
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST))
+#endif /* STM32F107xC */
+
+#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_OTGFSRST))
+#if defined(STM32F107xC)
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ETHMACRST))
+#endif /* STM32F107xC */
+
+/**
+ * @}
+ */
+#endif /* STM32F105xC || STM32F107xC */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) ||defined (STM32F107xC)
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
+ defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
+ defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
+
+#if defined(STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F100xB || STM32F100xE */
+
+#if defined (STM32F100xE)
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#endif /* STM32F100xE */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#endif /* STM32F101xG || STM32F103xG */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
+ defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST))
+
+#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST))
+#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
+
+#if defined (STM32F100xB) || defined (STM32F100xE)
+#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+
+#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#endif /* STM32F100xB || STM32F100xE */
+
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
+ defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST))
+#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST))
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST))
+#endif /* STM32F103xE || STM32F103xG */
+
+#if defined (STM32F100xE)
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST))
+#endif /* STM32F100xE */
+
+#if defined(STM32F101xG) || defined(STM32F103xG)
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+#endif /* STM32F101xG || STM32F103xG*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSE_PREDIV_VALUE__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__))
+#else
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSE_PREDIV_VALUE__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
+ MODIFY_REG(RCC->CFGR,RCC_CFGR_PLLXTPRE, (uint32_t)(__HSE_PREDIV_VALUE__))
+
+#endif /* STM32F105xC || STM32F107xC */
+
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+/**
+ * @brief Macro to get prediv1 factor for PLL.
+ */
+#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1)
+
+#else
+/**
+ * @brief Macro to get prediv1 factor for PLL.
+ */
+#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE)
+
+#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @defgroup RCCEx_PLLI2S_Configuration PLLI2S Configuration
+ * @{
+ */
+
+/** @brief Macros to enable the main PLLI2S.
+ * @note After enabling the main PLLI2S, the application software should wait on
+ * PLLI2SRDY flag to be set indicating that PLLI2S clock is stable and can
+ * be used as system clock source.
+ * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
+
+/** @brief Macros to disable the main PLLI2S.
+ * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
+
+/** @brief macros to configure the main PLLI2S multiplication factor.
+ * @note This function must be used only when the main PLLI2S is disabled.
+ *
+ * @param __PLLI2SMUL__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLI2S_MUL8: PLLI2SVCO = PLLI2S clock entry x 8
+ * @arg RCC_PLLI2S_MUL9: PLLI2SVCO = PLLI2S clock entry x 9
+ * @arg RCC_PLLI2S_MUL10: PLLI2SVCO = PLLI2S clock entry x 10
+ * @arg RCC_PLLI2S_MUL11: PLLI2SVCO = PLLI2S clock entry x 11
+ * @arg RCC_PLLI2S_MUL12: PLLI2SVCO = PLLI2S clock entry x 12
+ * @arg RCC_PLLI2S_MUL13: PLLI2SVCO = PLLI2S clock entry x 13
+ * @arg RCC_PLLI2S_MUL14: PLLI2SVCO = PLLI2S clock entry x 14
+ * @arg RCC_PLLI2S_MUL16: PLLI2SVCO = PLLI2S clock entry x 16
+ * @arg RCC_PLLI2S_MUL20: PLLI2SVCO = PLLI2S clock entry x 20
+ *
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL3MUL,(__PLLI2SMUL__))
+
+/**
+ * @}
+ */
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/** @defgroup RCCEx_Peripheral_Configuration Peripheral Configuration
+ * @brief Macros to configure clock source of different peripherals.
+ * @{
+ */
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+/** @brief Macro to configure the USB clock.
+ * @param __USBCLKSOURCE__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__))
+
+/** @brief Macro to get the USB clock (USBCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+
+#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+
+/** @brief Macro to configure the USB OTSclock.
+ * @param __USBCLKSOURCE__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV2: PLL clock divided by 2 selected as USB OTG FS clock
+ * @arg RCC_USBPLLCLK_DIV3: PLL clock divided by 3 selected as USB OTG FS clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__))
+
+/** @brief Macro to get the USB clock (USBCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV2: PLL clock divided by 2 selected as USB OTG FS clock
+ * @arg RCC_USBPLLCLK_DIV3: PLL clock divided by 3 selected as USB OTG FS clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE)))
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices).
+ * @param __ADCCLKSOURCE__: specifies the ADC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADCPCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC clock
+ */
+#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__))
+
+/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADCPCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC clock
+ * @arg RCC_ADCPCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC clock
+ */
+#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+
+/** @addtogroup RCCEx_HSE_Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the PLL2 & PLLI2S Predivision factor.
+ * @note Predivision factor can not be changed if PLL2 is used indirectly as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and
+ * then change the PREDIV2 factor.
+ * @param __HSE_PREDIV2_VALUE__: specifies the PREDIV2 value applied to PLL2 & PLLI2S.
+ * This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2, (uint32_t)(__HSE_PREDIV2_VALUE__))
+
+/**
+ * @brief Macro to get prediv2 factor for PLL2 & PLL3.
+ */
+#define __HAL_RCC_HSE_GET_PREDIV2() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx_PLLI2S_Configuration
+ * @{
+ */
+
+/** @brief Macros to enable the main PLL2.
+ * @note After enabling the main PLL2, the application software should wait on
+ * PLL2RDY flag to be set indicating that PLL2 clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) CR_PLL2ON_BB = ENABLE)
+
+/** @brief Macros to disable the main PLL2.
+ * @note The main PLL2 can not be disabled if it is used indirectly as system clock source
+ * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) CR_PLL2ON_BB = DISABLE)
+
+/** @brief macros to configure the main PLL2 multiplication factor.
+ * @note This function must be used only when the main PLL2 is disabled.
+ *
+ * @param __PLL2MUL__: specifies the multiplication factor for PLL2 VCO output clock
+ * This parameter can be one of the following values:
+ * @arg RCC_PLL2_MUL8: PLL2VCO = PLL2 clock entry x 8
+ * @arg RCC_PLL2_MUL9: PLL2VCO = PLL2 clock entry x 9
+ * @arg RCC_PLL2_MUL10: PLL2VCO = PLL2 clock entry x 10
+ * @arg RCC_PLL2_MUL11: PLL2VCO = PLL2 clock entry x 11
+ * @arg RCC_PLL2_MUL12: PLL2VCO = PLL2 clock entry x 12
+ * @arg RCC_PLL2_MUL13: PLL2VCO = PLL2 clock entry x 13
+ * @arg RCC_PLL2_MUL14: PLL2VCO = PLL2 clock entry x 14
+ * @arg RCC_PLL2_MUL16: PLL2VCO = PLL2 clock entry x 16
+ * @arg RCC_PLL2_MUL20: PLL2VCO = PLL2 clock entry x 20
+ *
+ */
+#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL2MUL,(__PLL2MUL__))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Configuration I2S Configuration
+ * @brief Macros to configure clock source of I2S peripherals.
+ * @{
+ */
+
+/** @brief Macro to configure the I2S2 clock.
+ * @param __I2S2CLKSOURCE__: specifies the I2S2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S2CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S2CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ */
+#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__))
+
+/** @brief Macro to get the I2S2 clock (I2S2CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2S2CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S2CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ */
+#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC)))
+
+/** @brief Macro to configure the I2S3 clock.
+ * @param __I2S2CLKSOURCE__: specifies the I2S3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S3CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S3CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ */
+#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__))
+
+/** @brief Macro to get the I2S3 clock (I2S3CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2S3CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S3CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ */
+#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC)))
+
+/**
+ * @}
+ */
+
+#endif /* STM32F105xC || STM32F107xC */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+/** @addtogroup RCCEx_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void);
+
+/**
+ * @}
+ */
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+