Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F103RB/stm32f10x_i2c.h
- Revision:
- 96:487b796308b0
- Parent:
- 95:7e07b6fb45cf
- Child:
- 97:433970e64889
--- a/TARGET_NUCLEO_F103RB/stm32f10x_i2c.h Wed Mar 04 07:31:39 2015 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,699 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f10x_i2c.h
- * @author MCD Application Team
- * @version V3.6.1
- * @date 05-March-2012
- * @brief This file contains all the functions prototypes for the I2C firmware
- * library.
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_I2C_H
-#define __STM32F10x_I2C_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
- * @{
- */
-
-/** @addtogroup I2C
- * @{
- */
-
-/** @defgroup I2C_Exported_Types
- * @{
- */
-
-/**
- * @brief I2C Init structure definition
- */
-
-typedef struct
-{
- uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency.
- This parameter must be set to a value lower than 400kHz */
-
- uint16_t I2C_Mode; /*!< Specifies the I2C mode.
- This parameter can be a value of @ref I2C_mode */
-
- uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
- This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
-
- uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address.
- This parameter can be a 7-bit or 10-bit address. */
-
- uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement.
- This parameter can be a value of @ref I2C_acknowledgement */
-
- uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
- This parameter can be a value of @ref I2C_acknowledged_address */
-}I2C_InitTypeDef;
-
-/**
- * @}
- */
-
-
-/** @defgroup I2C_Exported_Constants
- * @{
- */
-
-#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
- ((PERIPH) == I2C2))
-/** @defgroup I2C_mode
- * @{
- */
-
-#define I2C_Mode_I2C ((uint16_t)0x0000)
-#define I2C_Mode_SMBusDevice ((uint16_t)0x0002)
-#define I2C_Mode_SMBusHost ((uint16_t)0x000A)
-#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
- ((MODE) == I2C_Mode_SMBusDevice) || \
- ((MODE) == I2C_Mode_SMBusHost))
-/**
- * @}
- */
-
-/** @defgroup I2C_duty_cycle_in_fast_mode
- * @{
- */
-
-#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
-#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
-#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
- ((CYCLE) == I2C_DutyCycle_2))
-/**
- * @}
- */
-
-/** @defgroup I2C_acknowledgement
- * @{
- */
-
-#define I2C_Ack_Enable ((uint16_t)0x0400)
-#define I2C_Ack_Disable ((uint16_t)0x0000)
-#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
- ((STATE) == I2C_Ack_Disable))
-/**
- * @}
- */
-
-/** @defgroup I2C_transfer_direction
- * @{
- */
-
-#define I2C_Direction_Transmitter ((uint8_t)0x00)
-#define I2C_Direction_Receiver ((uint8_t)0x01)
-#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
- ((DIRECTION) == I2C_Direction_Receiver))
-/**
- * @}
- */
-
-/** @defgroup I2C_acknowledged_address
- * @{
- */
-
-#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000)
-#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000)
-#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
- ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
-/**
- * @}
- */
-
-/** @defgroup I2C_registers
- * @{
- */
-
-#define I2C_Register_CR1 ((uint8_t)0x00)
-#define I2C_Register_CR2 ((uint8_t)0x04)
-#define I2C_Register_OAR1 ((uint8_t)0x08)
-#define I2C_Register_OAR2 ((uint8_t)0x0C)
-#define I2C_Register_DR ((uint8_t)0x10)
-#define I2C_Register_SR1 ((uint8_t)0x14)
-#define I2C_Register_SR2 ((uint8_t)0x18)
-#define I2C_Register_CCR ((uint8_t)0x1C)
-#define I2C_Register_TRISE ((uint8_t)0x20)
-#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
- ((REGISTER) == I2C_Register_CR2) || \
- ((REGISTER) == I2C_Register_OAR1) || \
- ((REGISTER) == I2C_Register_OAR2) || \
- ((REGISTER) == I2C_Register_DR) || \
- ((REGISTER) == I2C_Register_SR1) || \
- ((REGISTER) == I2C_Register_SR2) || \
- ((REGISTER) == I2C_Register_CCR) || \
- ((REGISTER) == I2C_Register_TRISE))
-/**
- * @}
- */
-
-/** @defgroup I2C_SMBus_alert_pin_level
- * @{
- */
-
-#define I2C_SMBusAlert_Low ((uint16_t)0x2000)
-#define I2C_SMBusAlert_High ((uint16_t)0xDFFF)
-#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
- ((ALERT) == I2C_SMBusAlert_High))
-/**
- * @}
- */
-
-/** @defgroup I2C_PEC_position
- * @{
- */
-
-#define I2C_PECPosition_Next ((uint16_t)0x0800)
-#define I2C_PECPosition_Current ((uint16_t)0xF7FF)
-#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
- ((POSITION) == I2C_PECPosition_Current))
-/**
- * @}
- */
-
-/** @defgroup I2C_NCAK_position
- * @{
- */
-
-#define I2C_NACKPosition_Next ((uint16_t)0x0800)
-#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
-#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
- ((POSITION) == I2C_NACKPosition_Current))
-/**
- * @}
- */
-
-/** @defgroup I2C_interrupts_definition
- * @{
- */
-
-#define I2C_IT_BUF ((uint16_t)0x0400)
-#define I2C_IT_EVT ((uint16_t)0x0200)
-#define I2C_IT_ERR ((uint16_t)0x0100)
-#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
-/**
- * @}
- */
-
-/** @defgroup I2C_interrupts_definition
- * @{
- */
-
-#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
-#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
-#define I2C_IT_PECERR ((uint32_t)0x01001000)
-#define I2C_IT_OVR ((uint32_t)0x01000800)
-#define I2C_IT_AF ((uint32_t)0x01000400)
-#define I2C_IT_ARLO ((uint32_t)0x01000200)
-#define I2C_IT_BERR ((uint32_t)0x01000100)
-#define I2C_IT_TXE ((uint32_t)0x06000080)
-#define I2C_IT_RXNE ((uint32_t)0x06000040)
-#define I2C_IT_STOPF ((uint32_t)0x02000010)
-#define I2C_IT_ADD10 ((uint32_t)0x02000008)
-#define I2C_IT_BTF ((uint32_t)0x02000004)
-#define I2C_IT_ADDR ((uint32_t)0x02000002)
-#define I2C_IT_SB ((uint32_t)0x02000001)
-
-#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
-
-#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
- ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
- ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
- ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
- ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
- ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
- ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
-/**
- * @}
- */
-
-/** @defgroup I2C_flags_definition
- * @{
- */
-
-/**
- * @brief SR2 register flags
- */
-
-#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
-#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
-#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
-#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
-#define I2C_FLAG_TRA ((uint32_t)0x00040000)
-#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
-#define I2C_FLAG_MSL ((uint32_t)0x00010000)
-
-/**
- * @brief SR1 register flags
- */
-
-#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
-#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
-#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
-#define I2C_FLAG_OVR ((uint32_t)0x10000800)
-#define I2C_FLAG_AF ((uint32_t)0x10000400)
-#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
-#define I2C_FLAG_BERR ((uint32_t)0x10000100)
-#define I2C_FLAG_TXE ((uint32_t)0x10000080)
-#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
-#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
-#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
-#define I2C_FLAG_BTF ((uint32_t)0x10000004)
-#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
-#define I2C_FLAG_SB ((uint32_t)0x10000001)
-
-#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
-
-#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
- ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
- ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
- ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
- ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
- ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
- ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
- ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
- ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
- ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
- ((FLAG) == I2C_FLAG_SB))
-/**
- * @}
- */
-
-/** @defgroup I2C_Events
- * @{
- */
-
-/*========================================
-
- I2C Master Events (Events grouped in order of communication)
- ==========================================*/
-/**
- * @brief Communication start
- *
- * After sending the START condition (I2C_GenerateSTART() function) the master
- * has to wait for this event. It means that the Start condition has been correctly
- * released on the I2C bus (the bus is free, no other devices is communicating).
- *
- */
-/* --EV5 */
-#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
-
-/**
- * @brief Address Acknowledge
- *
- * After checking on EV5 (start condition correctly released on the bus), the
- * master sends the address of the slave(s) with which it will communicate
- * (I2C_Send7bitAddress() function, it also determines the direction of the communication:
- * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges
- * his address. If an acknowledge is sent on the bus, one of the following events will
- * be set:
- *
- * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED
- * event is set.
- *
- * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED
- * is set
- *
- * 3) In case of 10-Bit addressing mode, the master (just after generating the START
- * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData()
- * function). Then master should wait on EV9. It means that the 10-bit addressing
- * header has been correctly sent on the bus. Then master should send the second part of
- * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master
- * should wait for event EV6.
- *
- */
-
-/* --EV6 */
-#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
-#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
-/* --EV9 */
-#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
-
-/**
- * @brief Communication events
- *
- * If a communication is established (START condition generated and slave address
- * acknowledged) then the master has to check on one of the following events for
- * communication procedures:
- *
- * 1) Master Receiver mode: The master has to wait on the event EV7 then to read
- * the data received from the slave (I2C_ReceiveData() function).
- *
- * 2) Master Transmitter mode: The master has to send data (I2C_SendData()
- * function) then to wait on event EV8 or EV8_2.
- * These two events are similar:
- * - EV8 means that the data has been written in the data register and is
- * being shifted out.
- * - EV8_2 means that the data has been physically shifted out and output
- * on the bus.
- * In most cases, using EV8 is sufficient for the application.
- * Using EV8_2 leads to a slower communication but ensure more reliable test.
- * EV8_2 is also more suitable than EV8 for testing on the last data transmission
- * (before Stop condition generation).
- *
- * @note In case the user software does not guarantee that this event EV7 is
- * managed before the current byte end of transfer, then user may check on EV7
- * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
- * In this case the communication may be slower.
- *
- */
-
-/* Master RECEIVER mode -----------------------------*/
-/* --EV7 */
-#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
-
-/* Master TRANSMITTER mode --------------------------*/
-/* --EV8 */
-#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
-/* --EV8_2 */
-#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
-
-
-/*========================================
-
- I2C Slave Events (Events grouped in order of communication)
- ==========================================*/
-
-/**
- * @brief Communication start events
- *
- * Wait on one of these events at the start of the communication. It means that
- * the I2C peripheral detected a Start condition on the bus (generated by master
- * device) followed by the peripheral address. The peripheral generates an ACK
- * condition on the bus (if the acknowledge feature is enabled through function
- * I2C_AcknowledgeConfig()) and the events listed above are set :
- *
- * 1) In normal case (only one address managed by the slave), when the address
- * sent by the master matches the own address of the peripheral (configured by
- * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set
- * (where XXX could be TRANSMITTER or RECEIVER).
- *
- * 2) In case the address sent by the master matches the second address of the
- * peripheral (configured by the function I2C_OwnAddress2Config() and enabled
- * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED
- * (where XXX could be TRANSMITTER or RECEIVER) are set.
- *
- * 3) In case the address sent by the master is General Call (address 0x00) and
- * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd())
- * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.
- *
- */
-
-/* --EV1 (all the events below are variants of EV1) */
-/* 1) Case of One Single Address managed by the slave */
-#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
-#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
-
-/* 2) Case of Dual address managed by the slave */
-#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
-#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
-
-/* 3) Case of General Call enabled for the slave */
-#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
-
-/**
- * @brief Communication events
- *
- * Wait on one of these events when EV1 has already been checked and:
- *
- * - Slave RECEIVER mode:
- * - EV2: When the application is expecting a data byte to be received.
- * - EV4: When the application is expecting the end of the communication: master
- * sends a stop condition and data transmission is stopped.
- *
- * - Slave Transmitter mode:
- * - EV3: When a byte has been transmitted by the slave and the application is expecting
- * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
- * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
- * used when the user software doesn't guarantee the EV3 is managed before the
- * current byte end of transfer.
- * - EV3_2: When the master sends a NACK in order to tell slave that data transmission
- * shall end (before sending the STOP condition). In this case slave has to stop sending
- * data bytes and expect a Stop condition on the bus.
- *
- * @note In case the user software does not guarantee that the event EV2 is
- * managed before the current byte end of transfer, then user may check on EV2
- * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
- * In this case the communication may be slower.
- *
- */
-
-/* Slave RECEIVER mode --------------------------*/
-/* --EV2 */
-#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
-/* --EV4 */
-#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
-
-/* Slave TRANSMITTER mode -----------------------*/
-/* --EV3 */
-#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
-#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
-/* --EV3_2 */
-#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
-
-/*=========================== End of Events Description ==========================================*/
-
-#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
- ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
- ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
- ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
- ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
- ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
- ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
- ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
- ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
- ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
- ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
- ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
- ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
- ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
- ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
- ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
- ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
- ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
- ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
- ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
-/**
- * @}
- */
-
-/** @defgroup I2C_own_address1
- * @{
- */
-
-#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
-/**
- * @}
- */
-
-/** @defgroup I2C_clock_speed
- * @{
- */
-
-#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup I2C_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup I2C_Exported_Functions
- * @{
- */
-
-void I2C_DeInit(I2C_TypeDef* I2Cx);
-void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
-void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
-void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
-void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
-void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
-uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
-void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
-uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
-void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
-void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
-void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
-void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
-uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
-void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
-
-/**
- * @brief
- ****************************************************************************************
- *
- * I2C State Monitoring Functions
- *
- ****************************************************************************************
- * This I2C driver provides three different ways for I2C state monitoring
- * depending on the application requirements and constraints:
- *
- *
- * 1) Basic state monitoring:
- * Using I2C_CheckEvent() function:
- * It compares the status registers (SR1 and SR2) content to a given event
- * (can be the combination of one or more flags).
- * It returns SUCCESS if the current status includes the given flags
- * and returns ERROR if one or more flags are missing in the current status.
- * - When to use:
- * - This function is suitable for most applications as well as for startup
- * activity since the events are fully described in the product reference manual
- * (RM0008).
- * - It is also suitable for users who need to define their own events.
- * - Limitations:
- * - If an error occurs (ie. error flags are set besides to the monitored flags),
- * the I2C_CheckEvent() function may return SUCCESS despite the communication
- * hold or corrupted real state.
- * In this case, it is advised to use error interrupts to monitor the error
- * events and handle them in the interrupt IRQ handler.
- *
- * @note
- * For error management, it is advised to use the following functions:
- * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
- * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
- * Where x is the peripheral instance (I2C1, I2C2 ...)
- * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
- * in order to determine which error occurred.
- * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
- * and/or I2C_GenerateStop() in order to clear the error flag and source,
- * and return to correct communication status.
- *
- *
- * 2) Advanced state monitoring:
- * Using the function I2C_GetLastEvent() which returns the image of both status
- * registers in a single word (uint32_t) (Status Register 2 value is shifted left
- * by 16 bits and concatenated to Status Register 1).
- * - When to use:
- * - This function is suitable for the same applications above but it allows to
- * overcome the limitations of I2C_GetFlagStatus() function (see below).
- * The returned value could be compared to events already defined in the
- * library (stm32f10x_i2c.h) or to custom values defined by user.
- * - This function is suitable when multiple flags are monitored at the same time.
- * - At the opposite of I2C_CheckEvent() function, this function allows user to
- * choose when an event is accepted (when all events flags are set and no
- * other flags are set or just when the needed flags are set like
- * I2C_CheckEvent() function).
- * - Limitations:
- * - User may need to define his own events.
- * - Same remark concerning the error management is applicable for this
- * function if user decides to check only regular communication flags (and
- * ignores error flags).
- *
- *
- * 3) Flag-based state monitoring:
- * Using the function I2C_GetFlagStatus() which simply returns the status of
- * one single flag (ie. I2C_FLAG_RXNE ...).
- * - When to use:
- * - This function could be used for specific applications or in debug phase.
- * - It is suitable when only one flag checking is needed (most I2C events
- * are monitored through multiple flags).
- * - Limitations:
- * - When calling this function, the Status register is accessed. Some flags are
- * cleared when the status register is accessed. So checking the status
- * of one Flag, may clear other ones.
- * - Function may need to be called twice or more in order to monitor one
- * single event.
- *
- */
-
-/**
- *
- * 1) Basic state monitoring
- *******************************************************************************
- */
-ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
-/**
- *
- * 2) Advanced state monitoring
- *******************************************************************************
- */
-uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
-/**
- *
- * 3) Flag-based state monitoring
- *******************************************************************************
- */
-FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
-/**
- *
- *******************************************************************************
- */
-
-void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
-ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
-void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__STM32F10x_I2C_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/