Diff: main.cpp

Revision:

14:c62c3a92aba7

Parent:

13:e136665cf993

--- a/main.cpp	Sun Aug 27 05:48:02 2017 +0000
+++ b/main.cpp	Tue Oct 23 02:37:10 2018 +0000
@@ -1,4 +1,10 @@
-/*  
+/* 2018-10-22:  Note, this is a temporary gateway project to fix an issue with mbed linker
+ * Original Program:  https://os.mbed.com/users/electronichamsters/code/BLE_Gateway/
+ * mbed had some linker problems raised in issue 8344
+ *    https://github.com/ARMmbed/mbed-os/issues/8344
+ * My temporary fix is to revert to a earlier revision of mbed. Devloper notes indicates
+ * this will be cleaned up on mbed's side.
+ *
  * Copyright (c) Eric Tsai 2017
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
@@ -43,7 +49,7 @@
 mbedtls_aes_context aes;
 unsigned char iv[16] = {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2};       //16-byte aes key
 
-
+//Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 DigitalIn pinHandShake(p0);  //handshake uart to prevent output before bridge MCU is ready.  Flow control.
 
@@ -415,7 +421,7 @@
                 // 4.  Xmit Counter 0-255, incremented by Beacon with each new unique ADV event.
                 // "tmr":xxxx,
                 //---------------------------------------                
-                device.printf("\"xmit_cnt\":%d,", Received_Xmit_Cnt);
+                device.printf("\"xcnt\":%d,", Received_Xmit_Cnt);
                 
                 //---------------------------------------
                 // 5.  rest of sensor payload as json
@@ -430,7 +436,7 @@
     
                 device.printf("}");
                 device.printf("\r\n");  //gateway looking for cariage return to indicate end
-                wait_ms(60);  //needed to give gateway time to assert flow control handshake pin
+                wait_ms(140);  //needed to give gateway time to assert flow control handshake pin
                 while (pinHandShake.read() == 1)    //normally pulled down, so loop when gateway processing;
                 {
                     //uart flow control