mbed library with additional peripherals for ST F401 board

Fork of mbed-src by mbed official

This mbed LIB has additional peripherals for ST F401 board

  • UART2 : PA_3 rx, PA_2 tx
  • UART3 : PC_7 rx, PC_6 tx
  • I2C2 : PB_3 SDA, PB_10 SCL
  • I2C3 : PB_4 SDA, PA_8 SCL

targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_wwdg.h

Committer:
mbed_official
Date:
2014-01-27
Revision:
76:aeb1df146756
Child:
106:ced8cbb51063

File content as of revision 76:aeb1df146756:

/**
  ******************************************************************************
  * @file    stm32f0xx_wwdg.h
  * @author  MCD Application Team
  * @version V1.3.0
  * @date    16-January-2014
  * @brief   This file contains all the functions prototypes for the WWDG 
  *          firmware library.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_WWDG_H
#define __STM32F0XX_WWDG_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"

/** @addtogroup STM32F0xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup WWDG
  * @{
  */ 
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/

/** @defgroup WWDG_Exported_Constants
  * @{
  */ 
  
/** @defgroup WWDG_Prescaler 
  * @{
  */ 
  
#define WWDG_Prescaler_1    ((uint32_t)0x00000000)
#define WWDG_Prescaler_2    ((uint32_t)0x00000080)
#define WWDG_Prescaler_4    ((uint32_t)0x00000100)
#define WWDG_Prescaler_8    ((uint32_t)0x00000180)
#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
                                      ((PRESCALER) == WWDG_Prescaler_2) || \
                                      ((PRESCALER) == WWDG_Prescaler_4) || \
                                      ((PRESCALER) == WWDG_Prescaler_8))
#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))

/**
  * @}
  */ 

/**
  * @}
  */ 

/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/*  Function used to set the WWDG configuration to the default reset state ****/  
void WWDG_DeInit(void);

/* Prescaler, Refresh window and Counter configuration functions **************/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
void WWDG_SetWindowValue(uint8_t WindowValue);
void WWDG_EnableIT(void);
void WWDG_SetCounter(uint8_t Counter);

/* WWDG activation functions **************************************************/
void WWDG_Enable(uint8_t Counter);

/* Interrupts and flags management functions **********************************/
FlagStatus WWDG_GetFlagStatus(void);
void WWDG_ClearFlag(void);

#ifdef __cplusplus
}
#endif

#endif /* __STM32F0XX_WWDG_H */

/**
  * @}
  */ 

/**
  * @}
  */ 

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/