mbed library with additional peripherals for ST F401 board

Fork of mbed-src by mbed official

This mbed LIB has additional peripherals for ST F401 board

  • UART2 : PA_3 rx, PA_2 tx
  • UART3 : PC_7 rx, PC_6 tx
  • I2C2 : PB_3 SDA, PB_10 SCL
  • I2C3 : PB_4 SDA, PA_8 SCL
Revision:
76:aeb1df146756
Child:
80:66393a7b209d
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.h	Mon Jan 27 14:30:07 2014 +0000
@@ -0,0 +1,213 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_pwr.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    22-February-2013
+  * @brief   This file contains all the functions prototypes for the PWR firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_PWR_H
+#define __STM32L1xx_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx.h"
+
+/** @addtogroup STM32L1xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants
+  * @{
+  */ 
+
+/** @defgroup PWR_PVD_detection_level 
+  * @{
+  */ 
+
+#define PWR_PVDLevel_0                  PWR_CR_PLS_LEV0
+#define PWR_PVDLevel_1                  PWR_CR_PLS_LEV1
+#define PWR_PVDLevel_2                  PWR_CR_PLS_LEV2
+#define PWR_PVDLevel_3                  PWR_CR_PLS_LEV3
+#define PWR_PVDLevel_4                  PWR_CR_PLS_LEV4
+#define PWR_PVDLevel_5                  PWR_CR_PLS_LEV5
+#define PWR_PVDLevel_6                  PWR_CR_PLS_LEV6
+#define PWR_PVDLevel_7                  PWR_CR_PLS_LEV7 /* External input analog voltage 
+                                                          (Compare internally to VREFINT) */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
+                                 ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
+                                 ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_WakeUp_Pins 
+  * @{
+  */
+
+#define PWR_WakeUpPin_1                 ((uint32_t)0x00000000)
+#define PWR_WakeUpPin_2                 ((uint32_t)0x00000004)
+#define PWR_WakeUpPin_3                 ((uint32_t)0x00000008)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || \
+                                ((PIN) == PWR_WakeUpPin_2) || \
+                                ((PIN) == PWR_WakeUpPin_3))
+/**
+  * @}
+  */
+
+  
+/** @defgroup PWR_Voltage_Scaling_Ranges
+  * @{
+  */
+
+#define PWR_VoltageScaling_Range1       PWR_CR_VOS_0
+#define PWR_VoltageScaling_Range2       PWR_CR_VOS_1
+#define PWR_VoltageScaling_Range3       PWR_CR_VOS
+
+#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_VoltageScaling_Range1) || \
+                                             ((RANGE) == PWR_VoltageScaling_Range2) || \
+                                             ((RANGE) == PWR_VoltageScaling_Range3))
+/**
+  * @}
+  */    
+  
+/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode 
+  * @{
+  */
+
+#define PWR_Regulator_ON                ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower          PWR_CR_LPSDSR
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+                                     ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry 
+  * @{
+  */
+
+#define PWR_SLEEPEntry_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPEntry_WFE              ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE))
+ 
+/**
+  * @}
+  */
+  
+/** @defgroup PWR_STOP_mode_entry 
+  * @{
+  */
+
+#define PWR_STOPEntry_WFI               ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE               ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+ 
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag 
+  * @{
+  */
+
+#define PWR_FLAG_WU                     PWR_CSR_WUF
+#define PWR_FLAG_SB                     PWR_CSR_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY             PWR_CSR_VREFINTRDYF
+#define PWR_FLAG_VOS                    PWR_CSR_VOSF
+#define PWR_FLAG_REGLP                  PWR_CSR_REGLPF
+
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+                               ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY) || \
+                               ((FLAG) == PWR_FLAG_VOS) || ((FLAG) == PWR_FLAG_REGLP))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+/* Function used to set the PWR configuration to the default reset state ******/ 
+void PWR_DeInit(void);
+
+/* RTC Domain Access function *************************************************/ 
+void PWR_RTCAccessCmd(FunctionalState NewState);
+
+/* PVD configuration functions ************************************************/ 
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_PVDCmd(FunctionalState NewState);
+
+/* WakeUp pins configuration functions ****************************************/ 
+void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState);
+
+/* Ultra Low Power mode configuration functions *******************************/ 
+void PWR_FastWakeUpCmd(FunctionalState NewState);
+void PWR_UltraLowPowerCmd(FunctionalState NewState);
+
+/* Voltage Scaling configuration functions ************************************/ 
+void PWR_VoltageScalingConfig(uint32_t PWR_VoltageScaling);
+
+/* Low Power modes configuration functions ************************************/ 
+void PWR_EnterLowPowerRunMode(FunctionalState NewState);
+void PWR_EnterSleepMode(uint32_t PWR_Regulator, uint8_t PWR_SLEEPEntry);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+
+/* Flags management functions *************************************************/ 
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_PWR_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/