mbed library with additional peripherals for ST F401 board
Fork of mbed-src by
This mbed LIB has additional peripherals for ST F401 board
- UART2 : PA_3 rx, PA_2 tx
- UART3 : PC_7 rx, PC_6 tx
- I2C2 : PB_3 SDA, PB_10 SCL
- I2C3 : PB_4 SDA, PA_8 SCL
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.c
- Revision:
- 76:aeb1df146756
- Child:
- 80:66393a7b209d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.c Mon Jan 27 14:30:07 2014 +0000 @@ -0,0 +1,1909 @@ +/** + ****************************************************************************** + * @file stm32l1xx_adc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 22-February-2013 + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) peripheral: + * + Initialization and Configuration + * + Power saving + * + Analog Watchdog configuration + * + Temperature Sensor & Vrefint (Voltage Reference internal) management + * + Regular Channels Configuration + * + Regular Channels DMA Configuration + * + Injected channels Configuration + * + Interrupts and flags management + * + * @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (#) Configure the ADC Prescaler, conversion resolution and data alignment + using the ADC_Init() function. + (#) Activate the ADC peripheral using ADC_Cmd() function. + + *** Regular channels group configuration *** + ============================================ + [..] + (+) To configure the ADC regular channels group features, use + ADC_Init() and ADC_RegularChannelConfig() functions. + (+) To activate the continuous mode, use the ADC_continuousModeCmd() + function. + (+) To configurate and activate the Discontinuous mode, use the + ADC_DiscModeChannelCountConfig() and ADC_DiscModeCmd() functions. + (+) To read the ADC converted values, use the ADC_GetConversionValue() + function. + + *** DMA for Regular channels group features configuration *** + ============================================================= + [..] + (+) To enable the DMA mode for regular channels group, use the + ADC_DMACmd() function. + (+) To enable the generation of DMA requests continuously at the end + of the last DMA transfer, use the ADC_DMARequestAfterLastTransferCmd() + function. + + *** Injected channels group configuration *** + ============================================= + [..] + (+) To configure the ADC Injected channels group features, use + ADC_InjectedChannelConfig() and ADC_InjectedSequencerLengthConfig() + functions. + (+) To activate the continuous mode, use the ADC_continuousModeCmd() + function. + (+) To activate the Injected Discontinuous mode, use the + ADC_InjectedDiscModeCmd() function. + (+) To activate the AutoInjected mode, use the ADC_AutoInjectedConvCmd() + function. + (+) To read the ADC converted values, use the ADC_GetInjectedConversionValue() + function. + + @endverbatim + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_adc.h" +#include "stm32l1xx_rcc.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMODE_RESET ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF) + +/* ADC DELAY mask */ +#define CR2_DELS_RESET ((uint32_t)0xFFFFFF0F) + +/* ADC JEXTEN mask */ +#define CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD) + +/* ADC SQx mask */ +#define SQR5_SQ_SET ((uint32_t)0x0000001F) +#define SQR4_SQ_SET ((uint32_t)0x0000001F) +#define SQR3_SQ_SET ((uint32_t)0x0000001F) +#define SQR2_SQ_SET ((uint32_t)0x0000001F) +#define SQR1_SQ_SET ((uint32_t)0x0000001F) + +/* ADC L Mask */ +#define SQR1_L_RESET ((uint32_t)0xFE0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_SET ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_SET ((uint32_t)0x00300000) +#define JSQR_JL_RESET ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_SET ((uint32_t)0x00000007) +#define SMPR2_SMP_SET ((uint32_t)0x00000007) +#define SMPR3_SMP_SET ((uint32_t)0x00000007) +#define SMPR0_SMP_SET ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_OFFSET ((uint8_t)0x30) + +/* ADC CCR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0xFFFCFFFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** @defgroup ADC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC Prescaler. + (+) ADC Conversion Resolution (12bit..6bit). + (+) Scan Conversion Mode (multichannel or one channel) for regular group. + (+) ADC Continuous Conversion Mode (Continuous or Single conversion) for + regular group. + (+) External trigger Edge and source of regular group. + (+) Converted data alignment (left or right). + (+) The number of ADC conversions that will be done using the sequencer + for regular channel group. + (+) Enable or disable the ADC peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes ADC1 peripheral registers to their default reset values. + * @param None + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if(ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @note This function is used to configure the global features of the ADC ( + * Resolution and Data Alignment), however, the rest of the configuration + * parameters are specific to the regular channels group (scan mode + * activation, continuous mode activation, External trigger source and + * edge, number of conversion in the regular channels group sequencer). + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfConversion)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + /* Clear RES and SCAN bits */ + tmpreg1 &= CR1_CLEAR_MASK; + /* Configure ADCx: scan conversion mode and resolution */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + /* Set RES bit according to ADC_Resolution value */ + tmpreg1 |= (uint32_t)(((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8) | ADC_InitStruct->ADC_Resolution); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + /* Clear CONT, ALIGN, EXTEN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_MASK; + /* Configure ADCx: external trigger event and edge, data alignment and continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTEN bits according to ADC_ExternalTrigConvEdge value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ADC_InitStruct->ADC_ExternalTrigConvEdge | ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + /* Clear L bits */ + tmpreg1 &= SQR1_L_RESET; + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfConversion value */ + tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfConversion - (uint8_t)1); + tmpreg1 |= ((uint32_t)tmpreg2 << 20); + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @note This function is used to initialize the global features of the ADC ( + * Resolution and Data Alignment), however, the rest of the configuration + * parameters are specific to the regular channels group (scan mode + * activation, continuous mode activation, External trigger source and + * edge, number of conversion in the regular channels group sequencer). + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Resolution member */ + ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b; + + /* Initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + + /* Initialize the ADC_ExternalTrigConvEdge member */ + ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; + + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T2_CC2; + + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + + /* Initialize the ADC_NbrOfConversion member */ + ADC_InitStruct->ADC_NbrOfConversion = 1; +} + +/** + * @brief Initializes the ADCs peripherals according to the specified parameters + * in the ADC_CommonInitStruct. + * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure + * that contains the configuration information (Prescaler) for ADC1 peripheral. + * @retval None + */ +void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_PRESCALER(ADC_CommonInitStruct->ADC_Prescaler)); + + /*---------------------------- ADC CCR Configuration -----------------*/ + /* Get the ADC CCR value */ + tmpreg = ADC->CCR; + + /* Clear ADCPRE bit */ + tmpreg &= CR_CLEAR_MASK; + + /* Configure ADCx: ADC prescaler according to ADC_Prescaler */ + tmpreg |= (uint32_t)(ADC_CommonInitStruct->ADC_Prescaler); + + /* Write to ADC CCR */ + ADC->CCR = tmpreg; +} + +/** + * @brief Fills each ADC_CommonInitStruct member with its default value. + * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure + * which will be initialized. + * @retval None + */ +void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Prescaler member */ + ADC_CommonInitStruct->ADC_Prescaler = ADC_Prescaler_Div1; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= (uint32_t)ADC_CR2_ADON; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_ADON); + } +} + +/** + * @brief Selects the specified ADC Channels Bank. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_Bank: ADC Channels Bank. + * @arg ADC_Bank_A: ADC Channels Bank A. + * @arg ADC_Bank_B: ADC Channels Bank B. + * @retval None + */ +void ADC_BankSelection(ADC_TypeDef* ADCx, uint8_t ADC_Bank) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_BANK(ADC_Bank)); + + if (ADC_Bank != ADC_Bank_A) + { + /* Set the ADC_CFG bit to select the ADC Bank B channels */ + ADCx->CR2 |= (uint32_t)ADC_CR2_CFG; + } + else + { + /* Reset the ADC_CFG bit to select the ADC Bank A channels */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_CFG); + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group2 Power saving functions + * @brief Power saving functions + * +@verbatim + =============================================================================== + ##### Power saving functions ##### + =============================================================================== + [..] This section provides functions allowing to reduce power consumption. + [..] The two function must be combined to get the maximal benefits: + When the ADC frequency is higher than the CPU one, it is recommended to: + (#) Insert a freeze delay : + ==> using ADC_DelaySelectionConfig(ADC1, ADC_DelayLength_Freeze). + (#) Enable the power down in Idle and Delay phases : + ==> using ADC_PowerDownCmd(ADC1, ADC_PowerDown_Idle_Delay, ENABLE). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the ADC Power Down during Delay and/or Idle phase. + * @note ADC power-on and power-off can be managed by hardware to cut the + * consumption when the ADC is not converting. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_PowerDown: The ADC power down configuration. + * This parameter can be one of the following values: + * @arg ADC_PowerDown_Delay: ADC is powered down during delay phase. + * @arg ADC_PowerDown_Idle: ADC is powered down during Idle phase. + * @arg ADC_PowerDown_Idle_Delay: ADC is powered down during Delay and Idle phases. + * @note The ADC can be powered down: + * @note During the hardware delay insertion (using the ADC_PowerDown_Delay + * parameter). + * => The ADC is powered up again at the end of the delay. + * @note During the ADC is waiting for a trigger event ( using the + * ADC_PowerDown_Idle parameter). + * => The ADC is powered up at the next trigger event. + * @note During the hardware delay insertion or the ADC is waiting for a + * trigger event (using the ADC_PowerDown_Idle_Delay parameter). + * => The ADC is powered up only at the end of the delay and at the + * next trigger event. + * @param NewState: new state of the ADCx power down. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_PowerDownCmd(ADC_TypeDef* ADCx, uint32_t ADC_PowerDown, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_POWER_DOWN(ADC_PowerDown)); + + if (NewState != DISABLE) + { + /* Enable the ADC power-down during Delay and/or Idle phase */ + ADCx->CR1 |= ADC_PowerDown; + } + else + { + /* Disable The ADC power-down during Delay and/or Idle phase */ + ADCx->CR1 &= (uint32_t)~ADC_PowerDown; + } +} + +/** + * @brief Defines the length of the delay which is applied after a conversion + * or a sequence of conversion. + * @note When the CPU clock is not fast enough to manage the data rate, a + * Hardware delay can be introduced between ADC conversions to reduce + * this data rate. + * @note The Hardware delay is inserted after : + * - each regular conversion. + * - after each sequence of injected conversions. + * @note No Hardware delay is inserted between conversions of different groups. + * @note When the hardware delay is not enough, the Freeze Delay Mode can be + * selected and a new conversion can start only if all the previous data + * of the same group have been treated: + * - for a regular conversion: once the ADC conversion data register has + * been read (using ADC_GetConversionValue() function) or if the EOC + * Flag has been cleared (using ADC_ClearFlag() function). + * - for an injected conversion: when the JEOC bit has been cleared + * (using ADC_ClearFlag() function). + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_DelayLength: The length of delay which is applied after a + * conversion or a sequence of conversion. + * This parameter can be one of the following values: + * @arg ADC_DelayLength_None: No delay. + * @arg ADC_DelayLength_Freeze: Delay until the converted data has been read. + * @arg ADC_DelayLength_7Cycles: Delay length equal to 7 APB clock cycles. + * @arg ADC_DelayLength_15Cycles: Delay length equal to 15 APB clock cycles + * @arg ADC_DelayLength_31Cycles: Delay length equal to 31 APB clock cycles + * @arg ADC_DelayLength_63Cycles: Delay length equal to 63 APB clock cycles + * @arg ADC_DelayLength_127Cycles: Delay length equal to 127 APB clock cycles + * @arg ADC_DelayLength_255Cycles: Delay length equal to 255 APB clock cycles + * @retval None + */ +void ADC_DelaySelectionConfig(ADC_TypeDef* ADCx, uint8_t ADC_DelayLength) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_DELAY_LENGTH(ADC_DelayLength)); + + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old delay length */ + tmpreg &= CR2_DELS_RESET; + /* Set the delay length */ + tmpreg |= ADC_DelayLength; + /* Store the new register value */ + ADCx->CR2 = tmpreg; + +} + +/** + * @} + */ + +/** @defgroup ADC_Group3 Analog Watchdog configuration functions + * @brief Analog Watchdog configuration functions. + * +@verbatim + =============================================================================== + ##### Analog Watchdog configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the Analog Watchdog + (AWD) feature in the ADC. + [..] A typical configuration Analog Watchdog is done following these steps : + (#) the ADC guarded channel(s) is (are) selected using the + ADC_AnalogWatchdogSingleChannelConfig() function. + (#) The Analog watchdog lower and higher threshold are configured using + the ADC_AnalogWatchdogThresholdsConfig() function. + (#) The Analog watchdog is enabled and configured to enable the check, + on one or more channels, using the ADC_AnalogWatchdogCmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single + * regular channel. + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single + * injected channel. + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a + * single regular or injected channel. + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular + * channel. + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected + * channel. + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all + * regular and injected channels. + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog. + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear AWDEN, JAWDEN and AWDSGL bits */ + tmpreg &= CR1_AWDMODE_RESET; + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @arg ADC_Channel_19: ADC Channel19 selected + * @arg ADC_Channel_20: ADC Channel20 selected + * @arg ADC_Channel_21: ADC Channel21 selected + * @arg ADC_Channel_22: ADC Channel22 selected + * @arg ADC_Channel_23: ADC Channel23 selected + * @arg ADC_Channel_24: ADC Channel24 selected + * @arg ADC_Channel_25: ADC Channel25 selected + * @arg ADC_Channel_27: ADC Channel27 selected + * @arg ADC_Channel_28: ADC Channel28 selected + * @arg ADC_Channel_29: ADC Channel29 selected + * @arg ADC_Channel_30: ADC Channel30 selected + * @arg ADC_Channel_31: ADC Channel31 selected + * @arg ADC_Channel_0b: ADC Channel0b selected + * @arg ADC_Channel_1b: ADC Channel1b selected + * @arg ADC_Channel_2b: ADC Channel2b selected + * @arg ADC_Channel_3b: ADC Channel3b selected + * @arg ADC_Channel_6b: ADC Channel6b selected + * @arg ADC_Channel_7b: ADC Channel7b selected + * @arg ADC_Channel_8b: ADC Channel8b selected + * @arg ADC_Channel_9b: ADC Channel9b selected + * @arg ADC_Channel_10b: ADC Channel10b selected + * @arg ADC_Channel_11b: ADC Channel11b selected + * @arg ADC_Channel_12b: ADC Channel12b selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_RESET; + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @} + */ + +/** @defgroup ADC_Group4 Temperature Sensor & Vrefint (Voltage Reference internal) management function + * @brief Temperature Sensor & Vrefint (Voltage Reference internal) management function. + * +@verbatim + ========================================================================================= + ##### Temperature Sensor and Vrefint (Voltage Reference internal) management function ##### + ========================================================================================= + [..] This section provides a function allowing to enable/ disable the internal + connections between the ADC and the Temperature Sensor and the Vrefint + source. + [..] A typical configuration to get the Temperature sensor and Vrefint channels + voltages is done following these steps : + (#) Enable the internal connection of Temperature sensor and Vrefint sources + with the ADC channels using ADC_TempSensorVrefintCmd() function. + (#) select the ADC_Channel_TempSensor and/or ADC_Channel_Vrefint using + ADC_RegularChannelConfig() or ADC_InjectedChannelConfig() functions. + (#) Get the voltage values, using ADC_GetConversionValue() or + ADC_GetInjectedConversionValue(). +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the temperature sensor and Vrefint channel. + * @param NewState: new state of the temperature sensor and Vref int channels. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_TSVREFE; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_TSVREFE); + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group5 Regular Channels Configuration functions + * @brief Regular Channels Configuration functions. + * +@verbatim + =============================================================================== + ##### Regular Channels Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to manage the ADC regular channels, + it is composed of 2 sub sections : + (#) Configuration and management functions for regular channels: This + subsection provides functions allowing to configure the ADC regular + channels : + (++) Configure the rank in the regular group sequencer for each channel. + (++) Configure the sampling time for each channel. + (++) select the conversion Trigger for regular channels. + (++) select the desired EOC event behavior configuration. + (++) Activate the continuous Mode (*). + (++) Activate the Discontinuous Mode. + -@@- Please Note that the following features for regular channels are + configurated using the ADC_Init() function : + (+@@) scan mode activation. + (+@@) continuous mode activation (**). + (+@@) External trigger source. + (+@@) External trigger edge. + (+@@) number of conversion in the regular channels group sequencer. + -@@- (*) and (**) are performing the same configuration. + (#) Get the conversion data: This subsection provides an important function + in the ADC peripheral since it returns the converted data of the current + regular channel. When the Conversion value is read, the EOC Flag is + automatically cleared. +@endverbatim + * @{ + */ + +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sampling time. + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @arg ADC_Channel_19: ADC Channel19 selected + * @arg ADC_Channel_20: ADC Channel20 selected + * @arg ADC_Channel_21: ADC Channel21 selected + * @arg ADC_Channel_22: ADC Channel22 selected + * @arg ADC_Channel_23: ADC Channel23 selected + * @arg ADC_Channel_24: ADC Channel24 selected + * @arg ADC_Channel_25: ADC Channel25 selected + * @arg ADC_Channel_27: ADC Channel27 selected + * @arg ADC_Channel_28: ADC Channel28 selected + * @arg ADC_Channel_29: ADC Channel29 selected + * @arg ADC_Channel_30: ADC Channel30 selected + * @arg ADC_Channel_31: ADC Channel31 selected + * @arg ADC_Channel_0b: ADC Channel0b selected + * @arg ADC_Channel_1b: ADC Channel1b selected + * @arg ADC_Channel_2b: ADC Channel2b selected + * @arg ADC_Channel_3b: ADC Channel3b selected + * @arg ADC_Channel_6b: ADC Channel6b selected + * @arg ADC_Channel_7b: ADC Channel7b selected + * @arg ADC_Channel_8b: ADC Channel8b selected + * @arg ADC_Channel_9b: ADC Channel9b selected + * @arg ADC_Channel_10b: ADC Channel10b selected + * @arg ADC_Channel_11b: ADC Channel11b selected + * @arg ADC_Channel_12b: ADC Channel12b selected + * @param Rank: The rank in the regular group sequencer. This parameter + * must be between 1 to 28. + * @param ADC_SampleTime: The sample time value to be set for the selected + * channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_4Cycles: Sample time equal to 4 cycles + * @arg ADC_SampleTime_9Cycles: Sample time equal to 9 cycles + * @arg ADC_SampleTime_16Cycles: Sample time equal to 16 cycles + * @arg ADC_SampleTime_24Cycles: Sample time equal to 24 cycles + * @arg ADC_SampleTime_48Cycles: Sample time equal to 48 cycles + * @arg ADC_SampleTime_96Cycles: Sample time equal to 96 cycles + * @arg ADC_SampleTime_192Cycles: Sample time equal to 192 cycles + * @arg ADC_SampleTime_384Cycles: Sample time equal to 384 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + + /* If ADC_Channel_30 or ADC_Channel_31 is selected */ + if (ADC_Channel > ADC_Channel_29) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR0; + /* Calculate the mask to clear */ + tmpreg2 = SMPR0_SMP_SET << (3 * (ADC_Channel - 30)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 30)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR0 = tmpreg1; + } + /* If ADC_Channel_20 ... ADC_Channel_29 is selected */ + else if (ADC_Channel > ADC_Channel_19) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_SET << (3 * (ADC_Channel - 20)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 20)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + /* If ADC_Channel_10 ... ADC_Channel_19 is selected */ + else if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_SET << (3 * (ADC_Channel - 10)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR3; + /* Calculate the mask to clear */ + tmpreg2 = SMPR3_SMP_SET << (3 * ADC_Channel); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR3 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR5; + /* Calculate the mask to clear */ + tmpreg2 = SQR5_SQ_SET << (5 * (Rank - 1)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR5 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR4; + /* Calculate the mask to clear */ + tmpreg2 = SQR4_SQ_SET << (5 * (Rank - 7)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR4 = tmpreg1; + } + /* For Rank 13 to 18 */ + else if (Rank < 19) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_SET << (5 * (Rank - 13)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + + /* For Rank 19 to 24 */ + else if (Rank < 25) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_SET << (5 * (Rank - 19)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 19)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + + /* For Rank 25 to 28 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_SET << (5 * (Rank - 25)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 25)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables the selected ADC software start conversion of the regular channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval None + */ +void ADC_SoftwareStartConv(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Enable the selected ADC conversion for regular group */ + ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART; +} + +/** + * @brief Gets the selected ADC Software start regular conversion Status. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & ADC_CR2_SWSTART) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the SWSTART bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the EOC on each regular channel conversion. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC EOC flag rising + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC EOC rising on each regular channel conversion */ + ADCx->CR2 |= ADC_CR2_EOCS; + } + else + { + /* Disable the selected ADC EOC rising on each regular channel conversion */ + ADCx->CR2 &= (uint32_t)~ADC_CR2_EOCS; + } +} + +/** + * @brief Enables or disables the ADC continuous conversion mode. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC continuous conversion mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC continuous conversion mode */ + ADCx->CR2 |= (uint32_t)ADC_CR2_CONT; + } + else + { + /* Disable the selected ADC continuous conversion mode */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_CONT); + } +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param Number: specifies the discontinuous mode regular channel count value. + * This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_RESET; + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC discontinuous mode on regular + * group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= (uint32_t)ADC_CR1_DISCEN; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_DISCEN); + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @} + */ + +/** @defgroup ADC_Group6 Regular Channels DMA Configuration functions + * @brief Regular Channels DMA Configuration functions. + * +@verbatim + =============================================================================== + ##### Regular Channels DMA Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the DMA for ADC regular + channels.Since converted regular channel values are stored into a unique + data register, it is useful to use DMA for conversion of more than one + regular channel. This avoids the loss of the data already stored in the + ADC Data register. + When the DMA mode is enabled (using the ADC_DMACmd() function), after each + conversion of a regular channel, a DMA request is generated. + [..] Depending on the "DMA disable selection" configuration (using the + ADC_DMARequestAfterLastTransferCmd() function), at the end of the last DMA + transfer, two possibilities are allowed: + (+) No new DMA request is issued to the DMA controller (feature DISABLED). + (+) Requests can continue to be generated (feature ENABLED). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_DMA_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= (uint32_t)ADC_CR2_DMA; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_DMA); + } +} + + +/** + * @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode). + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC EOC flag rising + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request after last transfer */ + ADCx->CR2 |= ADC_CR2_DDS; + } + else + { + /* Disable the selected ADC DMA request after last transfer */ + ADCx->CR2 &= (uint32_t)~ADC_CR2_DDS; + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group7 Injected channels Configuration functions + * @brief Injected channels Configuration functions. + * +@verbatim + =============================================================================== + ##### Injected channels Configuration functions ##### + =============================================================================== + [..] This section provide functions allowing to configure the ADC Injected channels, + it is composed of 2 sub sections : + (#) Configuration functions for Injected channels: This subsection provides + functions allowing to configure the ADC injected channels : + (++) Configure the rank in the injected group sequencer for each channel. + (++) Configure the sampling time for each channel. + (++) Activate the Auto injected Mode. + (++) Activate the Discontinuous Mode. + (++) scan mode activation. + (++) External/software trigger source. + (++) External trigger edge. + (++) injected channels sequencer. + + (#) Get the Specified Injected channel conversion data: This subsection + provides an important function in the ADC peripheral since it returns + the converted data of the specific injected channel. + +@endverbatim + * @{ + */ + +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @arg ADC_Channel_19: ADC Channel19 selected + * @arg ADC_Channel_20: ADC Channel20 selected + * @arg ADC_Channel_21: ADC Channel21 selected + * @arg ADC_Channel_22: ADC Channel22 selected + * @arg ADC_Channel_23: ADC Channel23 selected + * @arg ADC_Channel_24: ADC Channel24 selected + * @arg ADC_Channel_25: ADC Channel25 selected + * @arg ADC_Channel_27: ADC Channel27 selected + * @arg ADC_Channel_28: ADC Channel28 selected + * @arg ADC_Channel_29: ADC Channel29 selected + * @arg ADC_Channel_30: ADC Channel30 selected + * @arg ADC_Channel_31: ADC Channel31 selected + * @arg ADC_Channel_0b: ADC Channel0b selected + * @arg ADC_Channel_1b: ADC Channel1b selected + * @arg ADC_Channel_2b: ADC Channel2b selected + * @arg ADC_Channel_3b: ADC Channel3b selected + * @arg ADC_Channel_6b: ADC Channel6b selected + * @arg ADC_Channel_7b: ADC Channel7b selected + * @arg ADC_Channel_8b: ADC Channel8b selected + * @arg ADC_Channel_9b: ADC Channel9b selected + * @arg ADC_Channel_10b: ADC Channel10b selected + * @arg ADC_Channel_11b: ADC Channel11b selected + * @arg ADC_Channel_12b: ADC Channel12b selected + * @param Rank: The rank in the injected group sequencer. This parameter + * must be between 1 to 4. + * @param ADC_SampleTime: The sample time value to be set for the selected + * channel. This parameter can be one of the following values: + * @arg ADC_SampleTime_4Cycles: Sample time equal to 4 cycles + * @arg ADC_SampleTime_9Cycles: Sample time equal to 9 cycles + * @arg ADC_SampleTime_16Cycles: Sample time equal to 16 cycles + * @arg ADC_SampleTime_24Cycles: Sample time equal to 24 cycles + * @arg ADC_SampleTime_48Cycles: Sample time equal to 48 cycles + * @arg ADC_SampleTime_96Cycles: Sample time equal to 96 cycles + * @arg ADC_SampleTime_192Cycles: Sample time equal to 192 cycles + * @arg ADC_SampleTime_384Cycles: Sample time equal to 384 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + + /* If ADC_Channel_30 or ADC_Channel_31 is selected */ + if (ADC_Channel > ADC_Channel_29) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR0; + /* Calculate the mask to clear */ + tmpreg2 = SMPR0_SMP_SET << (3 * (ADC_Channel - 30)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 30)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR0 = tmpreg1; + } + /* If ADC_Channel_20 ... ADC_Channel_29 is selected */ + else if (ADC_Channel > ADC_Channel_19) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_SET << (3 * (ADC_Channel - 20)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 20)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + /* If ADC_Channel_10 ... ADC_Channel_19 is selected */ + else if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_SET << (3 * (ADC_Channel - 10)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR3; + /* Calculate the mask to clear */ + tmpreg2 = SMPR3_SMP_SET << (3 * ADC_Channel); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR3 = tmpreg1; + } + + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_SET)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4- (JL+1))) */ + tmpreg2 = (uint32_t)(JSQR_JSQ_SET << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4- (JL+1))) */ + tmpreg2 = (uint32_t)(((uint32_t)(ADC_Channel)) << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Clear the old injected sequence length JL bits */ + tmpreg1 &= JSQR_JL_RESET; + /* Set the injected sequence length JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected. + * @arg ADC_InjectedChannel_2: Injected Channel2 selected. + * @arg ADC_InjectedChannel_3: Injected Channel3 selected. + * @arg ADC_InjectedChannel_4: Injected Channel4 selected. + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + +/** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected + * conversion. This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T9_CC1: Timer9 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T9_TRGO: Timer9 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected + * @arg ADC_ExternalTrigInjecConv_T10_CC1: Timer10 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T7_TRGO: Timer7 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_RESET; + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Configures the ADCx external trigger edge for injected channels conversion. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_ExternalTrigInjecConvEdge: specifies the ADC external trigger + * edge to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigConvEdge_None: external trigger disabled for + * injected conversion. + * @arg ADC_ExternalTrigConvEdge_Rising: detection on rising edge + * @arg ADC_ExternalTrigConvEdge_Falling: detection on falling edge + * @arg ADC_ExternalTrigConvEdge_RisingFalling: detection on + * both rising and falling edge + * @retval None + */ +void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(ADC_ExternalTrigInjecConvEdge)); + + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external trigger edge for injected group */ + tmpreg &= CR2_JEXTEN_RESET; + /* Set the new external trigger edge for injected group */ + tmpreg |= ADC_ExternalTrigInjecConvEdge; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables the selected ADC software start conversion of the injected + * channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval None + */ +void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC conversion for injected group */ + ADCx->CR2 |= (uint32_t)ADC_CR2_JSWSTART; +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & ADC_CR2_JSWSTART) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC auto injected + * conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= (uint32_t)ADC_CR1_JAUTO; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_JAUTO); + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on injected group channel. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= (uint32_t)ADC_CR1_JDISCEN; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_JDISCEN); + } +} + +/** + * @brief Returns the ADC injected channel conversion result. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_OFFSET; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @} + */ + +/** @defgroup ADC_Group8 Interrupts and flags management functions + * @brief Interrupts and flags management functions. + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the ADC Interrupts + and get the status and clear flags and Interrupts pending bits. + + [..] The ADC provide 4 Interrupts sources and 9 Flags which can be divided into + 3 groups: + *** Flags and Interrupts for ADC regular channels *** + ===================================================== + [..] + (+)Flags : + (##) ADC_FLAG_OVR : Overrun detection when regular converted data are + lost. + (##) ADC_FLAG_EOC : Regular channel end of conversion + to indicate + (depending on EOCS bit, managed by ADC_EOCOnEachRegularChannelCmd() ) + the end of : + (+++) a regular CHANNEL conversion. + (+++) sequence of regular GROUP conversions. + + + (##) ADC_FLAG_STRT: Regular channel start + to indicate when regular + CHANNEL conversion starts. + (##) ADC_FLAG_RCNR: Regular channel not ready + to indicate if a new + regular conversion can be launched. + (+)Interrupts : + (##) ADC_IT_OVR : specifies the interrupt source for Overrun detection + event. + (##) ADC_IT_EOC : specifies the interrupt source for Regular channel + end of conversion event. + + *** Flags and Interrupts for ADC Injected channels *** + ====================================================== + (+)Flags : + (##) ADC_FLAG_JEOC : Injected channel end of conversion+ to indicate at + the end of injected GROUP conversion. + (##) ADC_FLAG_JSTRT: Injected channel start + to indicate hardware when + injected GROUP conversion starts. + (##) ADC_FLAG_JCNR: Injected channel not ready + to indicate if a new + injected conversion can be launched. + (+)Interrupts + (##) ADC_IT_JEOC : specifies the interrupt source for Injected channel + end of conversion event. + *** General Flags and Interrupts for the ADC *** + ================================================ + (+)Flags : + (##) ADC_FLAG_AWD: Analog watchdog + to indicate if the converted voltage + crosses the programmed thresholds values. + (##) ADC_FLAG_ADONS: ADC ON status + to indicate if the ADC is ready + to convert. + (+)Interrupts : + (##) ADC_IT_AWD : specifies the interrupt source for Analog watchdog + event. + + [..] The user should identify which mode will be used in his application to + manage the ADC controller events: Polling mode or Interrupt mode. + + [..] In the Polling Mode it is advised to use the following functions: + (+) ADC_GetFlagStatus() : to check if flags events occur. + (+) ADC_ClearFlag() : to clear the flags events. + + [..] In the Interrupt Mode it is advised to use the following functions: + (+) ADC_ITConfig() : to enable or disable the interrupt source. + (+) ADC_GetITStatus() : to check if Interrupt occurs. + (+) ADC_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @arg ADC_IT_JEOC: End of injected conversion interrupt + * @arg ADC_IT_OVR: overrun interrupt + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint32_t itmask = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + itmask = (uint32_t)0x01 << itmask; + + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @arg ADC_FLAG_OVR: Overrun flag + * @arg ADC_FLAG_ADONS: ADC ON status + * @arg ADC_FLAG_RCNR: Regular channel not ready + * @arg ADC_FLAG_JCNR: Injected channel not ready + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint16_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @arg ADC_FLAG_OVR: overrun flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint16_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @arg ADC_IT_JEOC: End of injected conversion interrupt + * @arg ADC_IT_OVR: Overrun interrupt + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + + /* Get the ADC IT index */ + itmask = (uint32_t)((uint32_t)ADC_IT >> 8); + + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & ((uint32_t)0x01 << (uint8_t)ADC_IT)); + + /* Check the status of the specified ADC interrupt */ + if (((uint32_t)(ADCx->SR & (uint32_t)itmask) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @arg ADC_IT_JEOC: End of injected conversion interrupt + * @arg ADC_IT_OVR: Overrun interrupt + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/