mbed library with additional peripherals for ST F401 board

Fork of mbed-src by mbed official

This mbed LIB has additional peripherals for ST F401 board

  • UART2 : PA_3 rx, PA_2 tx
  • UART3 : PC_7 rx, PC_6 tx
  • I2C2 : PB_3 SDA, PB_10 SCL
  • I2C3 : PB_4 SDA, PA_8 SCL
Revision:
76:aeb1df146756
Child:
106:ced8cbb51063
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_misc.c	Mon Jan 27 14:30:07 2014 +0000
@@ -0,0 +1,167 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_misc.c
+  * @author  MCD Application Team
+  * @version V1.3.0
+  * @date    16-January-2014
+  * @brief   This file provides all the miscellaneous firmware functions (add-on
+  *          to CMSIS functions).
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_misc.h"
+
+/** @addtogroup STM32F0xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup MISC 
+  * @brief MISC driver modules
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup MISC_Private_Functions
+  * @{
+  */
+/**
+  *
+@verbatim
+ *******************************************************************************
+                   ##### Interrupts configuration functions #####
+ *******************************************************************************
+    [..] This section provide functions allowing to configure the NVIC interrupts
+        (IRQ). The Cortex-M0 exceptions are managed by CMSIS functions.
+         (#) Enable and Configure the priority of the selected IRQ Channels. 
+             The priority can be 0..3. 
+
+        -@- Lower priority values gives higher priority.
+        -@- Priority Order:
+            (#@) Lowest priority.
+            (#@) Lowest hardware priority (IRQn position).  
+  
+@endverbatim
+*/
+
+/**
+  * @brief  Initializes the NVIC peripheral according to the specified
+  *         parameters in the NVIC_InitStruct.
+  * @param  NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+  *         the configuration information for the specified NVIC peripheral.
+  * @retval None
+  */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+  uint32_t tmppriority = 0x00;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+  assert_param(IS_NVIC_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPriority));  
+    
+  if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+  {
+    /* Compute the Corresponding IRQ Priority --------------------------------*/    
+    tmppriority = NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02];
+    tmppriority &= (uint32_t)(~(((uint32_t)0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8)));
+    tmppriority |= (uint32_t)((((uint32_t)NVIC_InitStruct->NVIC_IRQChannelPriority << 6) & 0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8));    
+    
+    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02] = tmppriority;
+    
+    /* Enable the Selected IRQ Channels --------------------------------------*/
+    NVIC->ISER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+  else
+  {
+    /* Disable the Selected IRQ Channels -------------------------------------*/
+    NVIC->ICER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+}
+
+/**
+  * @brief  Selects the condition for the system to enter low power mode.
+  * @param  LowPowerMode: Specifies the new mode for the system to enter low power mode.
+  *          This parameter can be one of the following values:
+  *            @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
+  *            @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
+  *            @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
+  * @param  NewState: new state of LP condition. 
+  *          This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_LP(LowPowerMode));
+  
+  assert_param(IS_FUNCTIONAL_STATE(NewState));  
+  
+  if (NewState != DISABLE)
+  {
+    SCB->SCR |= LowPowerMode;
+  }
+  else
+  {
+    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+  }
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  SysTick_CLKSource: specifies the SysTick clock source.
+  *          This parameter can be one of the following values:
+  *            @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+  *            @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+  
+  if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+  {
+    SysTick->CTRL |= SysTick_CLKSource_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/