Peter Drescher
mbed library with additional peripherals for ST F401 board
Fork of
mbed-src
by 
mbed official
This mbed LIB has additional peripherals for ST F401 board
- UART2 : PA_3 rx, PA_2 tx
- UART3 : PC_7 rx, PC_6 tx
- I2C2 : PB_3 SDA, PB_10 SCL
- I2C3 : PB_4 SDA, PA_8 SCL
Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h
- Revision:
- 56:99eb381a3269
- Parent:
- 52:a51c77007319
- Child:
- 70:c1fbde68b492
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h Mon Dec 09 11:15:04 2013 +0000 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h Thu Dec 12 10:45:05 2013 +0000 @@ -88,45 +88,10 @@ PC_14 = 0x2E, PC_15 = 0x2F, - PD_0 = 0x30, - PD_1 = 0x31, PD_2 = 0x32, - PD_3 = 0x33, - PD_4 = 0x34, - PD_5 = 0x35, - PD_6 = 0x36, - PD_7 = 0x37, PD_8 = 0x38, - PD_9 = 0x39, - PD_10 = 0x3A, - PD_11 = 0x3B, - PD_12 = 0x3C, - PD_13 = 0x3D, - PD_14 = 0x3E, - PD_15 = 0x3F, - PE_0 = 0x40, - PE_1 = 0x41, - PE_2 = 0x42, - PE_3 = 0x43, - PE_4 = 0x44, - PE_5 = 0x45, - PE_6 = 0x46, - PE_7 = 0x47, - PE_8 = 0x48, - PE_9 = 0x49, - PE_10 = 0x4A, - PE_11 = 0x4B, - PE_12 = 0x4C, - PE_13 = 0x4D, - PE_14 = 0x4E, - PE_15 = 0x4F, - - //-------------------- - // NUCLEO_F103RB board - //-------------------- - - // Arduino connectors + // Arduino connector namings A0 = PA_0, A1 = PA_1, A2 = PA_4, @@ -150,15 +115,21 @@ D14 = PB_9, D15 = PB_8, + // Generic signals namings + LED1 = PA_5, + LED2 = PA_5, + LED3 = PA_5, + LED4 = PA_5, USER_BUTTON = PC_13, - UART_TX = PA_2, - UART_RX = PA_3, - - // mbed mandatory namings - LED1 = PA_5, - LED2 = PA_5, - LED3 = PA_5, - LED4 = PA_5, + SERIAL_TX = PA_2, + SERIAL_RX = PA_3, + I2C_SCL = PB_8, + I2C_SDA = PB_9, + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_CS = PB_6, + PWM_OUT = PB_3, // Not connected NC = (int)0xFFFFFFFF