mbed library with additional peripherals for ST F401 board
Fork of mbed-src by
This mbed LIB has additional peripherals for ST F401 board
- UART2 : PA_3 rx, PA_2 tx
- UART3 : PC_7 rx, PC_6 tx
- I2C2 : PB_3 SDA, PB_10 SCL
- I2C3 : PB_4 SDA, PA_8 SCL
Diff: targets/hal/TARGET_Freescale/TARGET_K20D5M/gpio_irq_api.c
- Revision:
- 68:41613245dfd7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_K20D5M/gpio_irq_api.c Thu Dec 26 13:00:06 2013 +0000 @@ -0,0 +1,167 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stddef.h> +#include "cmsis.h" + +#include "gpio_irq_api.h" +#include "error.h" + +#define CHANNEL_NUM 160 + +static uint32_t channel_ids[CHANNEL_NUM] = {0}; +static gpio_irq_handler irq_handler; + +#define IRQ_DISABLED (0) +#define IRQ_RAISING_EDGE PORT_PCR_IRQC(9) +#define IRQ_FALLING_EDGE PORT_PCR_IRQC(10) +#define IRQ_EITHER_EDGE PORT_PCR_IRQC(11) + +static void handle_interrupt_in(PORT_Type *port, int ch_base) { + uint32_t mask = 0, i; + + for (i = 0; i < 32; i++) { + uint32_t pmask = (1 << i); + if (port->ISFR & pmask) { + mask |= pmask; + uint32_t id = channel_ids[ch_base + i]; + if (id == 0) + continue; + + GPIO_Type *gpio = PTA; + gpio_irq_event event = IRQ_NONE; + uint32_t port_num = (port - PORTA) >> 12; + switch (port->PCR[i] & PORT_PCR_IRQC_MASK) { + case IRQ_RAISING_EDGE: + event = IRQ_RISE; + break; + + case IRQ_FALLING_EDGE: + event = IRQ_FALL; + break; + + case IRQ_EITHER_EDGE: + gpio += (port_num * 0x40); + event = (gpio->PDIR & pmask) ? (IRQ_RISE) : (IRQ_FALL); + break; + } + if (event != IRQ_NONE) + irq_handler(id, event); + } + } + port->ISFR = mask; +} + +void gpio_irqA(void) {handle_interrupt_in(PORTA, 0);} +void gpio_irqB(void) {handle_interrupt_in(PORTB, 32);} +void gpio_irqC(void) {handle_interrupt_in(PORTC, 64);} +void gpio_irqD(void) {handle_interrupt_in(PORTD, 96);} +void gpio_irqE(void) {handle_interrupt_in(PORTE, 128);} + +int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { + if (pin == NC) + return -1; + + irq_handler = handler; + + obj->port = pin >> PORT_SHIFT; + obj->pin = (pin & 0x7F) >> 2; + + uint32_t ch_base, vector; + IRQn_Type irq_n; + switch (obj->port) { + case PortA: + ch_base = 0; + irq_n = PORTA_IRQn; + vector = (uint32_t)gpio_irqA; + break; + case PortB: + ch_base = 32; + irq_n = PORTB_IRQn; + vector = (uint32_t)gpio_irqB; + break; + case PortC: + ch_base = 64; + irq_n = PORTC_IRQn; + vector = (uint32_t)gpio_irqC; + break; + case PortD: + ch_base = 96; + irq_n = PORTD_IRQn; vector = (uint32_t)gpio_irqD; + break; + case PortE: + ch_base = 128; + irq_n = PORTE_IRQn; + vector = (uint32_t)gpio_irqE; + break; + + default: + error("gpio_irq only supported on port A-E.\n"); + break; + } + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); + + obj->ch = ch_base + obj->pin; + channel_ids[obj->ch] = id; + + return 0; +} + +void gpio_irq_free(gpio_irq_t *obj) { + channel_ids[obj->ch] = 0; +} + +void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { + PORT_Type *port = (PORT_Type *)(PORTA_BASE + 0x1000 * obj->port); + + uint32_t irq_settings = IRQ_DISABLED; + + switch (port->PCR[obj->pin] & PORT_PCR_IRQC_MASK) { + case IRQ_DISABLED: + if (enable) + irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_FALLING_EDGE); + break; + + case IRQ_RAISING_EDGE: + if (enable) { + irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_EITHER_EDGE); + } else { + if (event == IRQ_FALL) + irq_settings = IRQ_RAISING_EDGE; + } + break; + + case IRQ_FALLING_EDGE: + if (enable) { + irq_settings = (event == IRQ_FALL) ? (IRQ_FALLING_EDGE) : (IRQ_EITHER_EDGE); + } else { + if (event == IRQ_RISE) + irq_settings = IRQ_FALLING_EDGE; + } + break; + + case IRQ_EITHER_EDGE: + if (enable) { + irq_settings = IRQ_EITHER_EDGE; + } else { + irq_settings = (event == IRQ_RISE) ? (IRQ_FALLING_EDGE) : (IRQ_RAISING_EDGE); + } + break; + } + + // Interrupt configuration and clear interrupt + port->PCR[obj->pin] = (port->PCR[obj->pin] & ~PORT_PCR_IRQC_MASK) | irq_settings | PORT_PCR_ISF_MASK; +}