ADC Niose test Connect four analog signals to your MBED. and then run the Windows app. The four traces are displayed on an oscilloscope like display. I have used a USB HID DEVICE link, so connections to D+, D- are required. The MBED code is otherwise quite basic, So you can modify it to your own test needs. Additionaly, there is a 16 bit count value, in my MBED code Mainly to test if MSB & LSB are correct.
Diff: HID/USBDevice_Types.h
- Revision:
- 0:cbe01b678bd4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HID/USBDevice_Types.h Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,69 @@ +/* USBDevice_Types.h */ +/* USB Device type definitions, conversions and constants */ +/* Copyright (c) 2011 ARM Limited. All rights reserved. */ + +#ifndef USBDEVICE_TYPES_H +#define USBDEVICE_TYPES_H + +/* Standard requests */ +#define GET_STATUS (0) +#define CLEAR_FEATURE (1) +#define SET_FEATURE (3) +#define SET_ADDRESS (5) +#define GET_DESCRIPTOR (6) +#define SET_DESCRIPTOR (7) +#define GET_CONFIGURATION (8) +#define SET_CONFIGURATION (9) +#define GET_INTERFACE (10) +#define SET_INTERFACE (11) + +/* bmRequestType.dataTransferDirection */ +#define HOST_TO_DEVICE (0) +#define DEVICE_TO_HOST (1) + +/* bmRequestType.Type*/ +#define STANDARD_TYPE (0) +#define CLASS_TYPE (1) +#define VENDOR_TYPE (2) +#define RESERVED_TYPE (3) + +/* bmRequestType.Recipient */ +#define DEVICE_RECIPIENT (0) +#define INTERFACE_RECIPIENT (1) +#define ENDPOINT_RECIPIENT (2) +#define OTHER_RECIPIENT (3) + +/* Descriptors */ +#define DESCRIPTOR_TYPE(wValue) (wValue >> 8) +#define DESCRIPTOR_INDEX(wValue) (wValue & 0xf) + +typedef struct { + struct { + uint8_t dataTransferDirection; + uint8_t Type; + uint8_t Recipient; + } bmRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} SETUP_PACKET; + +typedef struct { + SETUP_PACKET setup; + uint8_t *ptr; + uint32_t remaining; + uint8_t direction; + bool zlp; + bool notify; +} CONTROL_TRANSFER; + +typedef enum {ATTACHED, POWERED, DEFAULT, ADDRESS, CONFIGURED} DEVICE_STATE; + +typedef struct { + volatile DEVICE_STATE state; + uint8_t configuration; + bool suspended; +} USB_DEVICE; + +#endif