Diff: TARGET_LPC4088_EA/TOOLCHAIN_GCC_ARM/LPC4088.ld

Revision:

71:8fabd470bb6e

Parent:

70:673126e12c73

Child:

72:4096f863f923

--- a/TARGET_LPC4088_EA/TOOLCHAIN_GCC_ARM/LPC4088.ld	Mon Nov 18 22:09:31 2013 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,172 +0,0 @@
-/* Linker script for mbed LPC1768 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K
-  RAM (rwx) : ORIGIN = 0x100000E8, LENGTH = (32K - 0xE8)
-
-  USB_RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 16K
-  ETH_RAM(rwx) : ORIGIN = 0x20004000, LENGTH = 16K
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- *   Reset_Handler : Entry of reset handler
- * 
- * It defines following symbols, which code can use without definition:
- *   __exidx_start
- *   __exidx_end
- *   __etext
- *   __data_start__
- *   __preinit_array_start
- *   __preinit_array_end
- *   __init_array_start
- *   __init_array_end
- *   __fini_array_start
- *   __fini_array_end
- *   __data_end__
- *   __bss_start__
- *   __bss_end__
- *   __end__
- *   end
- *   __HeapLimit
- *   __StackLimit
- *   __StackTop
- *   __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-    .text :
-    {
-        KEEP(*(.isr_vector))
-        *(.text*)
-
-        KEEP(*(.init))
-        KEEP(*(.fini))
-
-        /* .ctors */
-        *crtbegin.o(.ctors)
-        *crtbegin?.o(.ctors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
-        *(SORT(.ctors.*))
-        *(.ctors)
-
-        /* .dtors */
-        *crtbegin.o(.dtors)
-        *crtbegin?.o(.dtors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
-        *(SORT(.dtors.*))
-        *(.dtors)
-
-        *(.rodata*)
-
-        KEEP(*(.eh_frame*))
-    } > FLASH
-
-    .ARM.extab : 
-    {
-        *(.ARM.extab* .gnu.linkonce.armextab.*)
-    } > FLASH
-
-    __exidx_start = .;
-    .ARM.exidx :
-    {
-        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-    } > FLASH
-    __exidx_end = .;
-
-    __etext = .;
-        
-    .data : AT (__etext)
-    {
-        __data_start__ = .;
-        Image$$RW_IRAM1$$Base = .;
-        *(vtable)
-        *(.data*)
-
-        . = ALIGN(4);
-        /* preinit data */
-        PROVIDE (__preinit_array_start = .);
-        KEEP(*(.preinit_array))
-        PROVIDE (__preinit_array_end = .);
-
-        . = ALIGN(4);
-        /* init data */
-        PROVIDE (__init_array_start = .);
-        KEEP(*(SORT(.init_array.*)))
-        KEEP(*(.init_array))
-        PROVIDE (__init_array_end = .);
-
-
-        . = ALIGN(4);
-        /* finit data */
-        PROVIDE (__fini_array_start = .);
-        KEEP(*(SORT(.fini_array.*)))
-        KEEP(*(.fini_array))
-        PROVIDE (__fini_array_end = .);
-
-        . = ALIGN(4);
-        /* All data end */
-        __data_end__ = .;
-
-    } > RAM
-
-    
-    .bss :
-    {
-        __bss_start__ = .;
-        *(.bss*)
-        *(COMMON)
-        __bss_end__ = .;
-        Image$$RW_IRAM1$$ZI$$Limit = . ;
-    } > RAM
-
-    
-    .heap :
-    {
-        __end__ = .;
-        end = __end__;
-        *(.heap*)
-        __HeapLimit = .;
-    } > RAM
-
-    /* .stack_dummy section doesn't contains any symbols. It is only
-     * used for linker to calculate size of stack sections, and assign
-     * values to stack symbols later */
-    .stack_dummy :
-    {
-        *(.stack)
-    } > RAM
-
-    /* Set stack top to end of RAM, and stack limit move down by
-     * size of stack_dummy section */
-    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
-    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
-    PROVIDE(__stack = __StackTop);
-    
-    /* Check if data + heap + stack exceeds RAM limit */
-    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-
-
-    /* Code can explicitly ask for data to be 
-       placed in these higher RAM banks where
-       they will be left uninitialized. 
-    */
-    .AHBSRAM0 (NOLOAD):
-    {
-        Image$$RW_IRAM2$$Base = . ;
-        *(AHBSRAM0)
-        Image$$RW_IRAM2$$ZI$$Limit = .;
-    } > USB_RAM
-
-    .AHBSRAM1 (NOLOAD):
-    {
-        Image$$RW_IRAM3$$Base = . ;
-        *(AHBSRAM1)
-        Image$$RW_IRAM3$$ZI$$Limit = .;
-    } > ETH_RAM
-}