Abdessamad El Abbassi
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F051R8/stm32f0xx_dbgmcu.c
- Revision:
- 130:1dec54e4aec3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F051R8/stm32f0xx_dbgmcu.c Fri Mar 21 11:45:09 2014 +0000
@@ -0,0 +1,228 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_dbgmcu.c
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 16-January-2014
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Debug MCU (DBGMCU) peripheral:
+ * + Device and Revision ID management
+ * + Peripherals Configuration
+ * @verbatim
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_dbgmcu.h"
+
+/** @addtogroup STM32F0xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DBGMCU
+ * @brief DBGMCU driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup DBGMCU_Private_Functions
+ * @{
+ */
+
+
+/** @defgroup DBGMCU_Group1 Device and Revision ID management functions
+ * @brief Device and Revision ID management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Device and Revision ID management functions #####
+ ==============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the device revision identifier.
+ * @param None
+ * @retval Device revision identifier
+ */
+uint32_t DBGMCU_GetREVID(void)
+{
+ return(DBGMCU->IDCODE >> 16);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @param None
+ * @retval Device identifier
+ */
+uint32_t DBGMCU_GetDEVID(void)
+{
+ return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Group2 Peripherals Configuration functions
+ * @brief Peripherals Configuration
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripherals Configuration functions #####
+ ==============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures low power mode behavior when the MCU is in Debug mode.
+ * @param DBGMCU_Periph: specifies the low power mode.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_STOP: Keep debugger connection during STOP mode
+ * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
+ * @param NewState: new state of the specified low power mode in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->CR |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->CR &= ~DBGMCU_Periph;
+ }
+}
+
+
+/**
+ * @brief Configures APB1 peripheral behavior when the MCU is in Debug mode.
+ * @param DBGMCU_Periph: specifies the APB1 peripheral.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted,
+ * not applicable for STM32F030 devices
+ * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
+ * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
+ * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted,
+ * applicable only for STM32F072 devices
+ * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
+ * @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped
+ * when Core is halted.
+ * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
+ * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
+ * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped
+ * when Core is halted
+ * @arg DBGMCU_CAN1_STOP: Debug CAN1 stopped when Core is halted,
+ * applicable only for STM32F042 and STM32F072 devices
+ * @param NewState: new state of the specified APB1 peripheral in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->APB1FZ |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->APB1FZ &= ~DBGMCU_Periph;
+ }
+}
+
+/**
+ * @brief Configures APB2 peripheral behavior when the MCU is in Debug mode.
+ * @param DBGMCU_Periph: specifies the APB2 peripheral.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
+ * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
+ * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
+ * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
+ * @param NewState: new state of the specified APB2 peripheral in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->APB2FZ |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->APB2FZ &= ~DBGMCU_Periph;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/