rau cha / mbed-src-I2CWaitFix

fix for mbed lib issue 3 (i2c problem) see also https://mbed.org/users/mbed_official/code/mbed/issues/3 affected implementations: LPC812, LPC11U24, LPC1768, LPC2368, LPC4088

Fork of mbed-src by mbed official

vendor/NXP/LPC4088/hal/i2c_api.c@11:f9e72c209510, 2013-06-30 (annotated)

Committer:
humlet
Date:
Sun Jun 30 16:34:50 2013 +0000
Revision:
11:f9e72c209510
Parent:
10:3bc89ef62ce7
Child:
13:bd9ff402dd42
fix for mbed lib issue 1 (i2c problem) see also https://mbed.org/users/mbed_official/code/mbed/issues/1

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 10:3bc89ef62ce7 1 /* mbed Microcontroller Library
emilmont 10:3bc89ef62ce7 2 * Copyright (c) 2006-2013 ARM Limited
emilmont 10:3bc89ef62ce7 3 *
emilmont 10:3bc89ef62ce7 4 * Licensed under the Apache License, Version 2.0 (the "License");
emilmont 10:3bc89ef62ce7 5 * you may not use this file except in compliance with the License.
emilmont 10:3bc89ef62ce7 6 * You may obtain a copy of the License at
emilmont 10:3bc89ef62ce7 7 *
emilmont 10:3bc89ef62ce7 8 * http://www.apache.org/licenses/LICENSE-2.0
emilmont 10:3bc89ef62ce7 9 *
emilmont 10:3bc89ef62ce7 10 * Unless required by applicable law or agreed to in writing, software
emilmont 10:3bc89ef62ce7 11 * distributed under the License is distributed on an "AS IS" BASIS,
emilmont 10:3bc89ef62ce7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
emilmont 10:3bc89ef62ce7 13 * See the License for the specific language governing permissions and
emilmont 10:3bc89ef62ce7 14 * limitations under the License.
emilmont 10:3bc89ef62ce7 15 */
emilmont 10:3bc89ef62ce7 16 #include "i2c_api.h"
emilmont 10:3bc89ef62ce7 17 #include "cmsis.h"
emilmont 10:3bc89ef62ce7 18 #include "pinmap.h"
emilmont 10:3bc89ef62ce7 19 #include "error.h"
emilmont 10:3bc89ef62ce7 20
emilmont 10:3bc89ef62ce7 21 static const PinMap PinMap_I2C_SDA[] = {
emilmont 10:3bc89ef62ce7 22 {P0_0 , I2C_1, 3},
emilmont 10:3bc89ef62ce7 23 {P0_10, I2C_2, 2},
emilmont 10:3bc89ef62ce7 24 {P0_19, I2C_1, 3},
emilmont 10:3bc89ef62ce7 25 {P0_27, I2C_0, 1},
emilmont 10:3bc89ef62ce7 26 {P1_15, I2C_2, 3},
emilmont 10:3bc89ef62ce7 27 {P1_30, I2C_0, 4},
emilmont 10:3bc89ef62ce7 28 {P2_14, I2C_1, 2},
emilmont 10:3bc89ef62ce7 29 {P2_30, I2C_2, 2},
emilmont 10:3bc89ef62ce7 30 {P4_20, I2C_2, 4},
emilmont 10:3bc89ef62ce7 31 {P5_2, I2C_0, 5},
emilmont 10:3bc89ef62ce7 32 {NC , NC , 0}
emilmont 10:3bc89ef62ce7 33 };
emilmont 10:3bc89ef62ce7 34
emilmont 10:3bc89ef62ce7 35 static const PinMap PinMap_I2C_SCL[] = {
emilmont 10:3bc89ef62ce7 36 {P0_1 , I2C_1, 3},
emilmont 10:3bc89ef62ce7 37 {P0_11, I2C_2, 2},
emilmont 10:3bc89ef62ce7 38 {P0_20, I2C_1, 3},
emilmont 10:3bc89ef62ce7 39 {P0_28, I2C_0, 1},
emilmont 10:3bc89ef62ce7 40 {P1_31, I2C_0, 4},
emilmont 10:3bc89ef62ce7 41 {P2_15, I2C_1, 2},
emilmont 10:3bc89ef62ce7 42 {P2_31, I2C_2, 2},
emilmont 10:3bc89ef62ce7 43 {P4_21, I2C_2, 2},
emilmont 10:3bc89ef62ce7 44 {P4_29, I2C_2, 4},
emilmont 10:3bc89ef62ce7 45 {P5_3, I2C_0, 5},
emilmont 10:3bc89ef62ce7 46 {NC , NC, 0}
emilmont 10:3bc89ef62ce7 47 };
emilmont 10:3bc89ef62ce7 48
emilmont 10:3bc89ef62ce7 49 #define I2C_CONSET(x) (x->i2c->CONSET)
emilmont 10:3bc89ef62ce7 50 #define I2C_CONCLR(x) (x->i2c->CONCLR)
emilmont 10:3bc89ef62ce7 51 #define I2C_STAT(x) (x->i2c->STAT)
emilmont 10:3bc89ef62ce7 52 #define I2C_DAT(x) (x->i2c->DAT)
emilmont 10:3bc89ef62ce7 53 #define I2C_SCLL(x, val) (x->i2c->SCLL = val)
emilmont 10:3bc89ef62ce7 54 #define I2C_SCLH(x, val) (x->i2c->SCLH = val)
emilmont 10:3bc89ef62ce7 55
emilmont 10:3bc89ef62ce7 56 static const uint32_t I2C_addr_offset[2][4] = {
emilmont 10:3bc89ef62ce7 57 {0x0C, 0x20, 0x24, 0x28},
emilmont 10:3bc89ef62ce7 58 {0x30, 0x34, 0x38, 0x3C}
emilmont 10:3bc89ef62ce7 59 };
emilmont 10:3bc89ef62ce7 60
emilmont 10:3bc89ef62ce7 61 static inline void i2c_conclr(i2c_t *obj, int start, int stop, int interrupt, int acknowledge) {
emilmont 10:3bc89ef62ce7 62 I2C_CONCLR(obj) = (start << 5)
emilmont 10:3bc89ef62ce7 63 | (stop << 4)
emilmont 10:3bc89ef62ce7 64 | (interrupt << 3)
emilmont 10:3bc89ef62ce7 65 | (acknowledge << 2);
emilmont 10:3bc89ef62ce7 66 }
emilmont 10:3bc89ef62ce7 67
emilmont 10:3bc89ef62ce7 68 static inline void i2c_conset(i2c_t *obj, int start, int stop, int interrupt, int acknowledge) {
emilmont 10:3bc89ef62ce7 69 I2C_CONSET(obj) = (start << 5)
emilmont 10:3bc89ef62ce7 70 | (stop << 4)
emilmont 10:3bc89ef62ce7 71 | (interrupt << 3)
emilmont 10:3bc89ef62ce7 72 | (acknowledge << 2);
emilmont 10:3bc89ef62ce7 73 }
emilmont 10:3bc89ef62ce7 74
emilmont 10:3bc89ef62ce7 75 // Clear the Serial Interrupt (SI)
emilmont 10:3bc89ef62ce7 76 static inline void i2c_clear_SI(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 77 i2c_conclr(obj, 0, 0, 1, 0);
emilmont 10:3bc89ef62ce7 78 }
emilmont 10:3bc89ef62ce7 79
emilmont 10:3bc89ef62ce7 80 static inline int i2c_status(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 81 return I2C_STAT(obj);
emilmont 10:3bc89ef62ce7 82 }
emilmont 10:3bc89ef62ce7 83
emilmont 10:3bc89ef62ce7 84 // Wait until the Serial Interrupt (SI) is set
emilmont 10:3bc89ef62ce7 85 static int i2c_wait_SI(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 86 int timeout = 0;
emilmont 10:3bc89ef62ce7 87 while (!(I2C_CONSET(obj) & (1 << 3))) {
emilmont 10:3bc89ef62ce7 88 timeout++;
emilmont 10:3bc89ef62ce7 89 if (timeout > 100000) return -1;
emilmont 10:3bc89ef62ce7 90 }
emilmont 10:3bc89ef62ce7 91 return 0;
emilmont 10:3bc89ef62ce7 92 }
emilmont 10:3bc89ef62ce7 93
emilmont 10:3bc89ef62ce7 94 static inline void i2c_interface_enable(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 95 I2C_CONSET(obj) = 0x40;
emilmont 10:3bc89ef62ce7 96 }
emilmont 10:3bc89ef62ce7 97
emilmont 10:3bc89ef62ce7 98 static inline void i2c_power_enable(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 99 switch ((int)obj->i2c) {
emilmont 10:3bc89ef62ce7 100 case I2C_0: LPC_SC->PCONP |= 1 << 7; break;
emilmont 10:3bc89ef62ce7 101 case I2C_1: LPC_SC->PCONP |= 1 << 19; break;
emilmont 10:3bc89ef62ce7 102 case I2C_2: LPC_SC->PCONP |= 1 << 26; break;
emilmont 10:3bc89ef62ce7 103 }
emilmont 10:3bc89ef62ce7 104 }
emilmont 10:3bc89ef62ce7 105
emilmont 10:3bc89ef62ce7 106 void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
emilmont 10:3bc89ef62ce7 107 // determine the SPI to use
emilmont 10:3bc89ef62ce7 108 I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
emilmont 10:3bc89ef62ce7 109 I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
emilmont 10:3bc89ef62ce7 110 obj->i2c = (LPC_I2C_TypeDef *)pinmap_merge(i2c_sda, i2c_scl);
emilmont 10:3bc89ef62ce7 111 if ((int)obj->i2c == NC) {
emilmont 10:3bc89ef62ce7 112 error("I2C pin mapping failed");
emilmont 10:3bc89ef62ce7 113 }
emilmont 10:3bc89ef62ce7 114
emilmont 10:3bc89ef62ce7 115 // enable power
emilmont 10:3bc89ef62ce7 116 i2c_power_enable(obj);
emilmont 10:3bc89ef62ce7 117
emilmont 10:3bc89ef62ce7 118 // set default frequency at 100k
emilmont 10:3bc89ef62ce7 119 i2c_frequency(obj, 100000);
emilmont 10:3bc89ef62ce7 120 i2c_conclr(obj, 1, 1, 1, 1);
emilmont 10:3bc89ef62ce7 121 i2c_interface_enable(obj);
emilmont 10:3bc89ef62ce7 122
emilmont 10:3bc89ef62ce7 123 pinmap_pinout(sda, PinMap_I2C_SDA);
emilmont 10:3bc89ef62ce7 124 pinmap_pinout(scl, PinMap_I2C_SCL);
emilmont 10:3bc89ef62ce7 125 }
emilmont 10:3bc89ef62ce7 126
emilmont 10:3bc89ef62ce7 127 inline int i2c_start(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 128 int status = 0;
emilmont 10:3bc89ef62ce7 129 // 8.1 Before master mode can be entered, I2CON must be initialised to:
emilmont 10:3bc89ef62ce7 130 // - I2EN STA STO SI AA - -
emilmont 10:3bc89ef62ce7 131 // - 1 0 0 0 x - -
emilmont 10:3bc89ef62ce7 132 // if AA = 0, it can't enter slave mode
emilmont 10:3bc89ef62ce7 133 i2c_conclr(obj, 1, 1, 1, 1);
emilmont 10:3bc89ef62ce7 134
emilmont 10:3bc89ef62ce7 135 // The master mode may now be entered by setting the STA bit
emilmont 10:3bc89ef62ce7 136 // this will generate a start condition when the bus becomes free
emilmont 10:3bc89ef62ce7 137 i2c_conset(obj, 1, 0, 0, 1);
emilmont 10:3bc89ef62ce7 138
emilmont 10:3bc89ef62ce7 139 i2c_wait_SI(obj);
emilmont 10:3bc89ef62ce7 140 status = i2c_status(obj);
emilmont 10:3bc89ef62ce7 141
emilmont 10:3bc89ef62ce7 142 // Clear start bit now transmitted, and interrupt bit
emilmont 10:3bc89ef62ce7 143 i2c_conclr(obj, 1, 0, 0, 0);
emilmont 10:3bc89ef62ce7 144 return status;
emilmont 10:3bc89ef62ce7 145 }
emilmont 10:3bc89ef62ce7 146
emilmont 10:3bc89ef62ce7 147 inline void i2c_stop(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 148 // write the stop bit
emilmont 10:3bc89ef62ce7 149 i2c_conset(obj, 0, 1, 0, 0);
emilmont 10:3bc89ef62ce7 150 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 151
emilmont 10:3bc89ef62ce7 152 // wait for STO bit to reset
emilmont 10:3bc89ef62ce7 153 while(I2C_CONSET(obj) & (1 << 4));
emilmont 10:3bc89ef62ce7 154 }
emilmont 10:3bc89ef62ce7 155
emilmont 10:3bc89ef62ce7 156
emilmont 10:3bc89ef62ce7 157 static inline int i2c_do_write(i2c_t *obj, int value, uint8_t addr) {
emilmont 10:3bc89ef62ce7 158 // write the data
emilmont 10:3bc89ef62ce7 159 I2C_DAT(obj) = value;
emilmont 10:3bc89ef62ce7 160
emilmont 10:3bc89ef62ce7 161 // clear SI to init a send
emilmont 10:3bc89ef62ce7 162 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 163
emilmont 10:3bc89ef62ce7 164 // wait and return status
emilmont 10:3bc89ef62ce7 165 i2c_wait_SI(obj);
emilmont 10:3bc89ef62ce7 166 return i2c_status(obj);
emilmont 10:3bc89ef62ce7 167 }
emilmont 10:3bc89ef62ce7 168
emilmont 10:3bc89ef62ce7 169 static inline int i2c_do_read(i2c_t *obj, int last) {
emilmont 10:3bc89ef62ce7 170 // we are in state 0x40 (SLA+R tx'd) or 0x50 (data rx'd and ack)
emilmont 10:3bc89ef62ce7 171 if(last) {
emilmont 10:3bc89ef62ce7 172 i2c_conclr(obj, 0, 0, 0, 1); // send a NOT ACK
emilmont 10:3bc89ef62ce7 173 } else {
emilmont 10:3bc89ef62ce7 174 i2c_conset(obj, 0, 0, 0, 1); // send a ACK
emilmont 10:3bc89ef62ce7 175 }
emilmont 10:3bc89ef62ce7 176
emilmont 10:3bc89ef62ce7 177 // accept byte
emilmont 10:3bc89ef62ce7 178 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 179
emilmont 10:3bc89ef62ce7 180 // wait for it to arrive
emilmont 10:3bc89ef62ce7 181 i2c_wait_SI(obj);
emilmont 10:3bc89ef62ce7 182
emilmont 10:3bc89ef62ce7 183 // return the data
emilmont 10:3bc89ef62ce7 184 return (I2C_DAT(obj) & 0xFF);
emilmont 10:3bc89ef62ce7 185 }
emilmont 10:3bc89ef62ce7 186
emilmont 10:3bc89ef62ce7 187 void i2c_frequency(i2c_t *obj, int hz) {
emilmont 10:3bc89ef62ce7 188 uint32_t PCLK = PeripheralClock;
emilmont 10:3bc89ef62ce7 189 uint32_t pulse = PCLK / (hz * 2);
emilmont 10:3bc89ef62ce7 190
emilmont 10:3bc89ef62ce7 191 // I2C Rate
emilmont 10:3bc89ef62ce7 192 I2C_SCLL(obj, pulse);
emilmont 10:3bc89ef62ce7 193 I2C_SCLH(obj, pulse);
emilmont 10:3bc89ef62ce7 194 }
emilmont 10:3bc89ef62ce7 195
emilmont 10:3bc89ef62ce7 196 // The I2C does a read or a write as a whole operation
emilmont 10:3bc89ef62ce7 197 // There are two types of error conditions it can encounter
emilmont 10:3bc89ef62ce7 198 // 1) it can not obtain the bus
emilmont 10:3bc89ef62ce7 199 // 2) it gets error responses at part of the transmission
emilmont 10:3bc89ef62ce7 200 //
emilmont 10:3bc89ef62ce7 201 // We tackle them as follows:
emilmont 10:3bc89ef62ce7 202 // 1) we retry until we get the bus. we could have a "timeout" if we can not get it
emilmont 10:3bc89ef62ce7 203 // which basically turns it in to a 2)
emilmont 10:3bc89ef62ce7 204 // 2) on error, we use the standard error mechanisms to report/debug
emilmont 10:3bc89ef62ce7 205 //
emilmont 10:3bc89ef62ce7 206 // Therefore an I2C transaction should always complete. If it doesn't it is usually
emilmont 10:3bc89ef62ce7 207 // because something is setup wrong (e.g. wiring), and we don't need to programatically
emilmont 10:3bc89ef62ce7 208 // check for that
emilmont 10:3bc89ef62ce7 209 int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
emilmont 10:3bc89ef62ce7 210 int count, status;
emilmont 10:3bc89ef62ce7 211
emilmont 10:3bc89ef62ce7 212 status = i2c_start(obj);
emilmont 10:3bc89ef62ce7 213
emilmont 10:3bc89ef62ce7 214 if ((status != 0x10) && (status != 0x08)) {
emilmont 10:3bc89ef62ce7 215 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 216 return status;
emilmont 10:3bc89ef62ce7 217 }
emilmont 10:3bc89ef62ce7 218
emilmont 10:3bc89ef62ce7 219 status = i2c_do_write(obj, (address | 0x01), 1);
emilmont 10:3bc89ef62ce7 220 if (status != 0x40) {
emilmont 10:3bc89ef62ce7 221 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 222 return status;
emilmont 10:3bc89ef62ce7 223 }
emilmont 10:3bc89ef62ce7 224
emilmont 10:3bc89ef62ce7 225 // Read in all except last byte
emilmont 10:3bc89ef62ce7 226 for (count = 0; count < (length - 1); count++) {
emilmont 10:3bc89ef62ce7 227 int value = i2c_do_read(obj, 0);
emilmont 10:3bc89ef62ce7 228 status = i2c_status(obj);
emilmont 10:3bc89ef62ce7 229 if (status != 0x50) {
emilmont 10:3bc89ef62ce7 230 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 231 return status;
emilmont 10:3bc89ef62ce7 232 }
emilmont 10:3bc89ef62ce7 233 data[count] = (char) value;
emilmont 10:3bc89ef62ce7 234 }
emilmont 10:3bc89ef62ce7 235
emilmont 10:3bc89ef62ce7 236 // read in last byte
emilmont 10:3bc89ef62ce7 237 int value = i2c_do_read(obj, 1);
emilmont 10:3bc89ef62ce7 238 status = i2c_status(obj);
emilmont 10:3bc89ef62ce7 239 if (status != 0x58) {
emilmont 10:3bc89ef62ce7 240 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 241 return status;
emilmont 10:3bc89ef62ce7 242 }
emilmont 10:3bc89ef62ce7 243
emilmont 10:3bc89ef62ce7 244 data[count] = (char) value;
emilmont 10:3bc89ef62ce7 245
emilmont 10:3bc89ef62ce7 246 // If not repeated start, send stop.
emilmont 10:3bc89ef62ce7 247 if (stop) {
emilmont 10:3bc89ef62ce7 248 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 249 }
emilmont 10:3bc89ef62ce7 250
emilmont 10:3bc89ef62ce7 251 return 0;
emilmont 10:3bc89ef62ce7 252 }
emilmont 10:3bc89ef62ce7 253
emilmont 10:3bc89ef62ce7 254 int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
emilmont 10:3bc89ef62ce7 255 int i, status;
emilmont 10:3bc89ef62ce7 256
emilmont 10:3bc89ef62ce7 257 status = i2c_start(obj);
emilmont 10:3bc89ef62ce7 258
emilmont 10:3bc89ef62ce7 259 if ((status != 0x10) && (status != 0x08)) {
emilmont 10:3bc89ef62ce7 260 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 261 return status;
emilmont 10:3bc89ef62ce7 262 }
emilmont 10:3bc89ef62ce7 263
emilmont 10:3bc89ef62ce7 264 status = i2c_do_write(obj, (address & 0xFE), 1);
emilmont 10:3bc89ef62ce7 265 if (status != 0x18) {
emilmont 10:3bc89ef62ce7 266 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 267 return status;
emilmont 10:3bc89ef62ce7 268 }
emilmont 10:3bc89ef62ce7 269
emilmont 10:3bc89ef62ce7 270 for (i=0; i<length; i++) {
emilmont 10:3bc89ef62ce7 271 status = i2c_do_write(obj, data[i], 0);
emilmont 10:3bc89ef62ce7 272 if (status != 0x28) {
emilmont 10:3bc89ef62ce7 273 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 274 return status;
emilmont 10:3bc89ef62ce7 275 }
emilmont 10:3bc89ef62ce7 276 }
emilmont 10:3bc89ef62ce7 277
humlet 11:f9e72c209510 278 // clearing the serial interrupt here might cause an unintended rewrite of the last byte
humlet 11:f9e72c209510 279 // see also issue report https://mbed.org/users/mbed_official/code/mbed/issues/1
humlet 11:f9e72c209510 280 // i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 281
emilmont 10:3bc89ef62ce7 282 // If not repeated start, send stop.
emilmont 10:3bc89ef62ce7 283 if (stop) {
emilmont 10:3bc89ef62ce7 284 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 285 }
emilmont 10:3bc89ef62ce7 286
emilmont 10:3bc89ef62ce7 287 return 0;
emilmont 10:3bc89ef62ce7 288 }
emilmont 10:3bc89ef62ce7 289
emilmont 10:3bc89ef62ce7 290 void i2c_reset(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 291 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 292 }
emilmont 10:3bc89ef62ce7 293
emilmont 10:3bc89ef62ce7 294 int i2c_byte_read(i2c_t *obj, int last) {
emilmont 10:3bc89ef62ce7 295 return (i2c_do_read(obj, last) & 0xFF);
emilmont 10:3bc89ef62ce7 296 }
emilmont 10:3bc89ef62ce7 297
emilmont 10:3bc89ef62ce7 298 int i2c_byte_write(i2c_t *obj, int data) {
emilmont 10:3bc89ef62ce7 299 int ack;
emilmont 10:3bc89ef62ce7 300 int status = i2c_do_write(obj, (data & 0xFF), 0);
emilmont 10:3bc89ef62ce7 301
emilmont 10:3bc89ef62ce7 302 switch(status) {
emilmont 10:3bc89ef62ce7 303 case 0x18: case 0x28: // Master transmit ACKs
emilmont 10:3bc89ef62ce7 304 ack = 1;
emilmont 10:3bc89ef62ce7 305 break;
emilmont 10:3bc89ef62ce7 306
emilmont 10:3bc89ef62ce7 307 case 0x40: // Master receive address transmitted ACK
emilmont 10:3bc89ef62ce7 308 ack = 1;
emilmont 10:3bc89ef62ce7 309 break;
emilmont 10:3bc89ef62ce7 310
emilmont 10:3bc89ef62ce7 311 case 0xB8: // Slave transmit ACK
emilmont 10:3bc89ef62ce7 312 ack = 1;
emilmont 10:3bc89ef62ce7 313 break;
emilmont 10:3bc89ef62ce7 314
emilmont 10:3bc89ef62ce7 315 default:
emilmont 10:3bc89ef62ce7 316 ack = 0;
emilmont 10:3bc89ef62ce7 317 break;
emilmont 10:3bc89ef62ce7 318 }
emilmont 10:3bc89ef62ce7 319
emilmont 10:3bc89ef62ce7 320 return ack;
emilmont 10:3bc89ef62ce7 321 }
emilmont 10:3bc89ef62ce7 322
emilmont 10:3bc89ef62ce7 323 void i2c_slave_mode(i2c_t *obj, int enable_slave) {
emilmont 10:3bc89ef62ce7 324 if (enable_slave != 0) {
emilmont 10:3bc89ef62ce7 325 i2c_conclr(obj, 1, 1, 1, 0);
emilmont 10:3bc89ef62ce7 326 i2c_conset(obj, 0, 0, 0, 1);
emilmont 10:3bc89ef62ce7 327 } else {
emilmont 10:3bc89ef62ce7 328 i2c_conclr(obj, 1, 1, 1, 1);
emilmont 10:3bc89ef62ce7 329 }
emilmont 10:3bc89ef62ce7 330 }
emilmont 10:3bc89ef62ce7 331
emilmont 10:3bc89ef62ce7 332 int i2c_slave_receive(i2c_t *obj) {
emilmont 10:3bc89ef62ce7 333 int status;
emilmont 10:3bc89ef62ce7 334 int retval;
emilmont 10:3bc89ef62ce7 335
emilmont 10:3bc89ef62ce7 336 status = i2c_status(obj);
emilmont 10:3bc89ef62ce7 337 switch(status) {
emilmont 10:3bc89ef62ce7 338 case 0x60: retval = 3; break;
emilmont 10:3bc89ef62ce7 339 case 0x70: retval = 2; break;
emilmont 10:3bc89ef62ce7 340 case 0xA8: retval = 1; break;
emilmont 10:3bc89ef62ce7 341 default : retval = 0; break;
emilmont 10:3bc89ef62ce7 342 }
emilmont 10:3bc89ef62ce7 343
emilmont 10:3bc89ef62ce7 344 return(retval);
emilmont 10:3bc89ef62ce7 345 }
emilmont 10:3bc89ef62ce7 346
emilmont 10:3bc89ef62ce7 347 int i2c_slave_read(i2c_t *obj, char *data, int length) {
emilmont 10:3bc89ef62ce7 348 int count = 0;
emilmont 10:3bc89ef62ce7 349 int status;
emilmont 10:3bc89ef62ce7 350
emilmont 10:3bc89ef62ce7 351 do {
emilmont 10:3bc89ef62ce7 352 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 353 i2c_wait_SI(obj);
emilmont 10:3bc89ef62ce7 354 status = i2c_status(obj);
emilmont 10:3bc89ef62ce7 355 if((status == 0x80) || (status == 0x90)) {
emilmont 10:3bc89ef62ce7 356 data[count] = I2C_DAT(obj) & 0xFF;
emilmont 10:3bc89ef62ce7 357 }
emilmont 10:3bc89ef62ce7 358 count++;
emilmont 10:3bc89ef62ce7 359 } while (((status == 0x80) || (status == 0x90) ||
emilmont 10:3bc89ef62ce7 360 (status == 0x060) || (status == 0x70)) && (count < length));
emilmont 10:3bc89ef62ce7 361
emilmont 10:3bc89ef62ce7 362 if(status != 0xA0) {
emilmont 10:3bc89ef62ce7 363 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 364 }
emilmont 10:3bc89ef62ce7 365
emilmont 10:3bc89ef62ce7 366 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 367
emilmont 10:3bc89ef62ce7 368 return (count - 1);
emilmont 10:3bc89ef62ce7 369 }
emilmont 10:3bc89ef62ce7 370
emilmont 10:3bc89ef62ce7 371 int i2c_slave_write(i2c_t *obj, const char *data, int length) {
emilmont 10:3bc89ef62ce7 372 int count = 0;
emilmont 10:3bc89ef62ce7 373 int status;
emilmont 10:3bc89ef62ce7 374
emilmont 10:3bc89ef62ce7 375 if(length <= 0) {
emilmont 10:3bc89ef62ce7 376 return(0);
emilmont 10:3bc89ef62ce7 377 }
emilmont 10:3bc89ef62ce7 378
emilmont 10:3bc89ef62ce7 379 do {
emilmont 10:3bc89ef62ce7 380 status = i2c_do_write(obj, data[count], 0);
emilmont 10:3bc89ef62ce7 381 count++;
emilmont 10:3bc89ef62ce7 382 } while ((count < length) && (status == 0xB8));
emilmont 10:3bc89ef62ce7 383
emilmont 10:3bc89ef62ce7 384 if((status != 0xC0) && (status != 0xC8)) {
emilmont 10:3bc89ef62ce7 385 i2c_stop(obj);
emilmont 10:3bc89ef62ce7 386 }
emilmont 10:3bc89ef62ce7 387
emilmont 10:3bc89ef62ce7 388 i2c_clear_SI(obj);
emilmont 10:3bc89ef62ce7 389
emilmont 10:3bc89ef62ce7 390 return(count);
emilmont 10:3bc89ef62ce7 391 }
emilmont 10:3bc89ef62ce7 392
emilmont 10:3bc89ef62ce7 393 void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
emilmont 10:3bc89ef62ce7 394 uint32_t addr;
emilmont 10:3bc89ef62ce7 395
emilmont 10:3bc89ef62ce7 396 if ((idx >= 0) && (idx <= 3)) {
emilmont 10:3bc89ef62ce7 397 addr = ((uint32_t)obj->i2c) + I2C_addr_offset[0][idx];
emilmont 10:3bc89ef62ce7 398 *((uint32_t *) addr) = address & 0xFF;
emilmont 10:3bc89ef62ce7 399 addr = ((uint32_t)obj->i2c) + I2C_addr_offset[1][idx];
emilmont 10:3bc89ef62ce7 400 *((uint32_t *) addr) = mask & 0xFE;
emilmont 10:3bc89ef62ce7 401 }
emilmont 10:3bc89ef62ce7 402 }