Stuart Northfield
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_ll_usb.h
- Revision:
- 384:ef87175507f1
- Parent:
- 383:0564d9840d0d
- Child:
- 385:be64abf45658
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_ll_usb.h Mon Nov 03 11:00:07 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,459 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_usb.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
- * @brief Header file of USB Core HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_LL_USB_H
-#define __STM32F4xx_LL_USB_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL
- * @{
- */
-
-/** @addtogroup USB_Core
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/**
- * @brief USB Mode definition
- */
-typedef enum
-{
- USB_OTG_DEVICE_MODE = 0,
- USB_OTG_HOST_MODE = 1,
- USB_OTG_DRD_MODE = 2
-
-}USB_OTG_ModeTypeDef;
-
-/**
- * @brief URB States definition
- */
-typedef enum {
- URB_IDLE = 0,
- URB_DONE,
- URB_NOTREADY,
- URB_NYET,
- URB_ERROR,
- URB_STALL
-
-}USB_OTG_URBStateTypeDef;
-
-/**
- * @brief Host channel States definition
- */
-typedef enum {
- HC_IDLE = 0,
- HC_XFRC,
- HC_HALTED,
- HC_NAK,
- HC_NYET,
- HC_STALL,
- HC_XACTERR,
- HC_BBLERR,
- HC_DATATGLERR
-
-}USB_OTG_HCStateTypeDef;
-
-/**
- * @brief PCD Initialization Structure definition
- */
-typedef struct
-{
- uint32_t dev_endpoints; /*!< Device Endpoints number.
- This parameter depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t Host_channels; /*!< Host Channels number.
- This parameter Depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
-
- uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
-
- uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS_ */
-
- uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY_ */
-
- uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
-
- uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
-
- uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
-
- uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
-
- uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
-
-}USB_OTG_CfgTypeDef;
-
-typedef struct
-{
- uint8_t num; /*!< Endpoint number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t is_stall; /*!< Endpoint stall condition
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
-
- uint8_t data_pid_start; /*!< Initial data PID
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t even_odd_frame; /*!< IFrame parity
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint16_t tx_fifo_num; /*!< Transmission FIFO number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t maxpacket; /*!< Endpoint Max packet size
- This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
- uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
-
- uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
-
- uint32_t xfer_len; /*!< Current transfer length */
-
- uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
-
-}USB_OTG_EPTypeDef;
-
-typedef struct
-{
- uint8_t dev_addr ; /*!< USB device address.
- This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
-
- uint8_t ch_num; /*!< Host channel number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t ep_num; /*!< Endpoint number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t ep_is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t speed; /*!< USB Host speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
-
- uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
-
- uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
-
- uint8_t ep_type; /*!< Endpoint Type.
- This parameter can be any value of @ref USB_EP_Type_ */
-
- uint16_t max_packet; /*!< Endpoint Max packet size.
- This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
- uint8_t data_pid; /*!< Initial data PID.
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
-
- uint32_t xfer_len; /*!< Current transfer length. */
-
- uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
-
- uint8_t toggle_in; /*!< IN transfer current toggle flag.
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t toggle_out; /*!< OUT transfer current toggle flag
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
-
- uint32_t ErrCnt; /*!< Host channel error count.*/
-
- USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
- This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
-
- USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
- This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
-
-}USB_OTG_HCTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PCD_Exported_Constants
- * @{
- */
-
-/** @defgroup USB_Core_Mode_
- * @{
- */
-#define USB_OTG_MODE_DEVICE 0
-#define USB_OTG_MODE_HOST 1
-#define USB_OTG_MODE_DRD 2
-/**
- * @}
- */
-
-/** @defgroup USB_Core_Speed_
- * @{
- */
-#define USB_OTG_SPEED_HIGH 0
-#define USB_OTG_SPEED_HIGH_IN_FULL 1
-#define USB_OTG_SPEED_LOW 2
-#define USB_OTG_SPEED_FULL 3
-/**
- * @}
- */
-
-/** @defgroup USB_Core_PHY_
- * @{
- */
-#define USB_OTG_ULPI_PHY 1
-#define USB_OTG_EMBEDDED_PHY 2
-/**
- * @}
- */
-
-/** @defgroup USB_Core_MPS_
- * @{
- */
-#define USB_OTG_HS_MAX_PACKET_SIZE 512
-#define USB_OTG_FS_MAX_PACKET_SIZE 64
-#define USB_OTG_MAX_EP0_SIZE 64
-/**
- * @}
- */
-
-/** @defgroup USB_Core_Phy_Frequency_
- * @{
- */
-#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
-#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
-#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
-#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
-/**
- * @}
- */
-
-/** @defgroup USB_CORE_Frame_Interval_
- * @{
- */
-#define DCFG_FRAME_INTERVAL_80 0
-#define DCFG_FRAME_INTERVAL_85 1
-#define DCFG_FRAME_INTERVAL_90 2
-#define DCFG_FRAME_INTERVAL_95 3
-/**
- * @}
- */
-
-/** @defgroup USB_EP0_MPS_
- * @{
- */
-#define DEP0CTL_MPS_64 0
-#define DEP0CTL_MPS_32 1
-#define DEP0CTL_MPS_16 2
-#define DEP0CTL_MPS_8 3
-/**
- * @}
- */
-
-/** @defgroup USB_EP_Speed_
- * @{
- */
-#define EP_SPEED_LOW 0
-#define EP_SPEED_FULL 1
-#define EP_SPEED_HIGH 2
-/**
- * @}
- */
-
-/** @defgroup USB_EP_Type_
- * @{
- */
-#define EP_TYPE_CTRL 0
-#define EP_TYPE_ISOC 1
-#define EP_TYPE_BULK 2
-#define EP_TYPE_INTR 3
-#define EP_TYPE_MSK 3
-/**
- * @}
- */
-
-/** @defgroup USB_STS_Defines_
- * @{
- */
-#define STS_GOUT_NAK 1
-#define STS_DATA_UPDT 2
-#define STS_XFER_COMP 3
-#define STS_SETUP_COMP 4
-#define STS_SETUP_UPDT 6
-/**
- * @}
- */
-
-/** @defgroup HCFG_SPEED_Defines_
- * @{
- */
-#define HCFG_30_60_MHZ 0
-#define HCFG_48_MHZ 1
-#define HCFG_6_MHZ 2
-/**
- * @}
- */
-
-/** @defgroup HPRT0_PRTSPD_SPEED_Defines_
- * @{
- */
-#define HPRT0_PRTSPD_HIGH_SPEED 0
-#define HPRT0_PRTSPD_FULL_SPEED 1
-#define HPRT0_PRTSPD_LOW_SPEED 2
-/**
- * @}
- */
-
-#define HCCHAR_CTRL 0
-#define HCCHAR_ISOC 1
-#define HCCHAR_BULK 2
-#define HCCHAR_INTR 3
-
-#define HC_PID_DATA0 0
-#define HC_PID_DATA2 1
-#define HC_PID_DATA1 2
-#define HC_PID_SETUP 3
-
-#define GRXSTS_PKTSTS_IN 2
-#define GRXSTS_PKTSTS_IN_XFER_COMP 3
-#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
-#define GRXSTS_PKTSTS_CH_HALTED 7
-
-#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
-#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
-
-#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
-#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
-#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
-#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
-
-#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
-#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
-
-/* Exported macro ------------------------------------------------------------*/
-#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
-#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
-
-#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
-#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
-
-/* Exported functions --------------------------------------------------------*/
-HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
-HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
-HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
-HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
-void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
-HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
-HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
-uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
-uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
-void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
-
-HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
-HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
-HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
-uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps);
-HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
-uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
-HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
-HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F4xx_LL_USB_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
