Stuart Northfield
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_ll_fsmc.c
- Revision:
- 384:ef87175507f1
- Parent:
- 383:0564d9840d0d
- Child:
- 385:be64abf45658
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_ll_fsmc.c Mon Nov 03 11:00:07 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,857 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_fsmc.c
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
- * @brief FSMC Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
- * + Initialization/de-initialization functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### FSMC peripheral features #####
- ==============================================================================
- [..] The Flexible static memory controller (FSMC) includes two memory controllers:
- (+) The NOR/PSRAM memory controller
- (+) The NAND/PC Card memory controller
-
- [..] The FSMC functional block makes the interface with synchronous and asynchronous static
- memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
- (+) to translate AHB transactions into the appropriate external device protocol.
- (+) to meet the access time requirements of the external memory devices.
-
- [..] All external memories share the addresses, data and control signals with the controller.
- Each external device is accessed by means of a unique Chip Select. The FSMC performs
- only one access at a time to an external device.
- The main features of the FSMC controller are the following:
- (+) Interface with static-memory mapped devices including:
- (++) Static random access memory (SRAM).
- (++) Read-only memory (ROM).
- (++) NOR Flash memory/OneNAND Flash memory.
- (++) PSRAM (4 memory banks).
- (++) 16-bit PC Card compatible devices.
- (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
- data.
- (+) Independent Chip Select control for each memory bank.
- (+) Independent configuration for each memory bank.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FSMC
- * @brief FSMC driver modules
- * @{
- */
-
-#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup FSMC_Private_Functions
- * @{
- */
-
-/** @defgroup FSMC_NORSRAM Controller functions
- * @brief NORSRAM Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NORSRAM device driver #####
- ==============================================================================
-
- [..]
- This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
- to run the NORSRAM external devices.
-
- (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
- (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
- (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
- (+) FSMC NORSRAM bank extended timing configuration using the function
- FSMC_NORSRAM_Extended_Timing_Init()
- (+) FSMC NORSRAM bank enable/disable write operation using the functions
- FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
-
-@endverbatim
- * @{
- */
-
-/** @defgroup HAL_FSMC_NORSRAM_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC NORSRAM interface
- (+) De-initialize the FSMC NORSRAM interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initialize the FSMC_NORSRAM device according to the specified
- * control parameters in the FSMC_NORSRAM_InitTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Init: Pointer to NORSRAM Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
- assert_param(IS_FSMC_MUX(Init->DataAddressMux));
- assert_param(IS_FSMC_MEMORY(Init->MemoryType));
- assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
- assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
- assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
- assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
- assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
- assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
- assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
- assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
- assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
-
- /* Set NORSRAM device control parameters */
- tmpr = (uint32_t)(Init->DataAddressMux |\
- Init->MemoryType |\
- Init->MemoryDataWidth |\
- Init->BurstAccessMode |\
- Init->WaitSignalPolarity |\
- Init->WrapMode |\
- Init->WaitSignalActive |\
- Init->WriteOperation |\
- Init->WaitSignal |\
- Init->ExtendedMode |\
- Init->AsynchronousWait |\
- Init->WriteBurst
- );
-
- if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
- {
- tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
- }
-
- Device->BTCR[Init->NSBank] = tmpr;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief DeInitialize the FSMC_NORSRAM peripheral
- * @param Device: Pointer to NORSRAM device instance
- * @param ExDevice: Pointer to NORSRAM extended mode device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
-
- /* Disable the FSMC_NORSRAM device */
- __FSMC_NORSRAM_DISABLE(Device, Bank);
-
- /* De-initialize the FSMC_NORSRAM device */
- /* FSMC_NORSRAM_BANK1 */
- if(Bank == FSMC_NORSRAM_BANK1)
- {
- Device->BTCR[Bank] = 0x000030DB;
- }
- /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
- else
- {
- Device->BTCR[Bank] = 0x000030D2;
- }
-
- Device->BTCR[Bank + 1] = 0x0FFFFFFF;
- ExDevice->BWTR[Bank] = 0x0FFFFFFF;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Initialize the FSMC_NORSRAM Timing according to the specified
- * parameters in the FSMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
- assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
- assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
-
- /* Set FSMC_NORSRAM device timing parameters */
- tmpr = (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode)
- );
-
- Device->BTCR[Bank + 1] = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
- * parameters in the FSMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
-{
- /* Set NORSRAM device timing register for write configuration, if extended mode is used */
- if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
- {
- /* Check the parameters */
- assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
- assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
- assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
-
- Device->BWTR[Bank] = (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode));
- }
- else
- {
- Device->BWTR[Bank] = 0x0FFFFFFF;
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_FSMC_NORSRAM_Group3 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FSMC_NORSRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FSMC NORSRAM interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically FSMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Enable write operation */
- Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FSMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Disable write operation */
- Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup FSMC_PCCARD Controller functions
- * @brief PCCARD Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NAND device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FSMC NAND banks in order
- to run the NAND external devices.
-
- (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
- (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
- (+) FSMC NAND bank common space timing configuration using the function
- FSMC_NAND_CommonSpace_Timing_Init()
- (+) FSMC NAND bank attribute space timing configuration using the function
- FSMC_NAND_AttributeSpace_Timing_Init()
- (+) FSMC NAND bank enable/disable ECC correction feature using the functions
- FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
- (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
-
-@endverbatim
- * @{
- */
-
-/** @defgroup HAL_FSMC_NAND_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC NAND interface
- (+) De-initialize the FSMC NAND interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FSMC_NAND device according to the specified
- * control parameters in the FSMC_NAND_HandleTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Init: Pointer to NAND Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
-{
- uint32_t tmppcr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
- assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
- assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
- assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
-
- /* Set NAND device control parameters */
- tmppcr = (uint32_t)(Init->Waitfeature |\
- FSMC_PCR_MEMORY_TYPE_NAND |\
- Init->MemoryDataWidth |\
- Init->EccComputation |\
- Init->ECCPageSize |\
- ((Init->TCLRSetupTime) << 9) |\
- ((Init->TARSetupTime) << 13)
- );
-
- if(Init->NandBank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PCR2 = tmppcr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PCR3 = tmppcr;
- }
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Initializes the FSMC_NAND Common space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmppmem = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Set FSMC_NAND device timing parameters */
- tmppmem = (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PMEM2 = tmppmem;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PMEM3 = tmppmem;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmppatt = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Set FSMC_NAND device timing parameters */
- tmppatt = (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PATT2 = tmppatt;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PATT3 = tmppatt;
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief DeInitializes the FSMC_NAND device
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Disable the NAND Bank */
- __FSMC_NAND_DISABLE(Device, Bank);
-
- /* De-initialize the NAND Bank */
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Set the FSMC_NAND_BANK2 registers to their reset values */
- Device->PCR2 = 0x00000018;
- Device->SR2 = 0x00000040;
- Device->PMEM2 = 0xFCFCFCFC;
- Device->PATT2 = 0xFCFCFCFC;
- }
- /* FSMC_Bank3_NAND */
- else
- {
- /* Set the FSMC_NAND_BANK3 registers to their reset values */
- Device->PCR3 = 0x00000018;
- Device->SR3 = 0x00000040;
- Device->PMEM3 = 0xFCFCFCFC;
- Device->PATT3 = 0xFCFCFCFC;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_FSMC_NAND_Group3 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FSMC_NAND Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FSMC NAND interface.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Enables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Enable ECC feature */
- if(Bank == FSMC_NAND_BANK2)
- {
- Device->PCR2 |= FSMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 |= FSMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Disables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Disable ECC feature */
- if(Bank == FSMC_NAND_BANK2)
- {
- Device->PCR2 &= ~FSMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 &= ~FSMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param ECCval: Pointer to ECC value
- * @param Bank: NAND bank number
- * @param Timeout: Timeout wait value
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NAND_DEVICE(Device));
- assert_param(IS_FSMC_NAND_BANK(Bank));
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait untill FIFO is empty */
- while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Get the ECCR2 register value */
- *ECCval = (uint32_t)Device->ECCR2;
- }
- else
- {
- /* Get the ECCR3 register value */
- *ECCval = (uint32_t)Device->ECCR3;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup FSMC_PCCARD Controller functions
- * @brief PCCARD Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use PCCARD device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
- to run the PCCARD/compact flash external devices.
-
- (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
- (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
- (+) FSMC PCCARD bank common space timing configuration using the function
- FSMC_PCCARD_CommonSpace_Timing_Init()
- (+) FSMC PCCARD bank attribute space timing configuration using the function
- FSMC_PCCARD_AttributeSpace_Timing_Init()
- (+) FSMC PCCARD bank IO space timing configuration using the function
- FSMC_PCCARD_IOSpace_Timing_Init()
-
-@endverbatim
- * @{
- */
-
-/** @defgroup HAL_FSMC_PCCARD_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC PCCARD interface
- (+) De-initialize the FSMC PCCARD interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FSMC_PCCARD device according to the specified
- * control parameters in the FSMC_PCCARD_HandleTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Init: Pointer to PCCARD Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
-
- /* Set FSMC_PCCARD device control parameters */
- Device->PCR4 = (uint32_t)(Init->Waitfeature |\
- FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
- (Init->TCLRSetupTime << 9) |\
- (Init->TARSetupTime << 13));
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Set PCCARD timing parameters */
- Device->PMEM4 = (uint32_t)((Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- (Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Set PCCARD timing parameters */
- Device->PATT4 = (uint32_t)((Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- (Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Set FSMC_PCCARD device timing parameters */
- Device->PIO4 = (uint32_t)((Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- (Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FSMC_PCCARD device
- * @param Device: Pointer to PCCARD device instance
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
-{
- /* Disable the FSMC_PCCARD device */
- __FSMC_PCCARD_DISABLE(Device);
-
- /* De-initialize the FSMC_PCCARD device */
- Device->PCR4 = 0x00000018;
- Device->SR4 = 0x00000000;
- Device->PMEM4 = 0xFCFCFCFC;
- Device->PATT4 = 0xFCFCFCFC;
- Device->PIO4 = 0xFCFCFCFC;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-
-#endif /* HAL_FSMC_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
