Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_hal_pwr_ex.h

Revision:

384:ef87175507f1

Parent:

383:0564d9840d0d

Child:

385:be64abf45658

--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_hal_pwr_ex.h	Mon Nov 03 11:00:07 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,197 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_pwr_ex.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    19-June-2014
-  * @brief   Header file of PWR HAL Extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_PWR_EX_H
-#define __STM32F4xx_HAL_PWR_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PWREx
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/* Exported constants --------------------------------------------------------*/
-/* ------------- PWR registers bit address in the alias region ---------------*/
-/* --- CR Register ---*/
-/* Alias word address of FPDS bit */
-#define FPDS_BitNumber  0x09
-#define CR_FPDS_BB      (PERIPH_BB_BASE + (CR_OFFSET * 32) + (FPDS_BitNumber * 4))
-
-/* Alias word address of ODEN bit   */
-#define ODEN_BitNumber           0x10
-#define CR_ODEN_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4))
-
-/* Alias word address of ODSWEN bit */
-#define ODSWEN_BitNumber         0x11
-#define CR_ODSWEN_BB             (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4))
-    
-/* Alias word address of MRLVDS bit */
-#define MRLVDS_BitNumber         0x0B
-#define CR_MRLVDS_BB             (PERIPH_BB_BASE + (CR_OFFSET * 32) + (MRLVDS_BitNumber * 4))
-
-/* Alias word address of LPLVDS bit */
-#define LPLVDS_BitNumber         0x0A
-#define CR_LPLVDS_BB             (PERIPH_BB_BASE + (CR_OFFSET * 32) + (LPLVDS_BitNumber * 4))
-
-/* --- CSR Register ---*/
-/* Alias word address of BRE bit */
-#define BRE_BitNumber   0x09
-#define CSR_BRE_BB      (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (BRE_BitNumber * 4))    
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-   
-/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode 
-  * @{
-  */
-#define PWR_MAINREGULATOR_UNDERDRIVE_ON                       PWR_CR_MRUDS
-#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON                   ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
-
-#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
-                                                ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
-/**
-  * @}
-  */ 
-  
-/** @defgroup PWREx_Over_Under_Drive_Flag 
-  * @{
-  */
-#define PWR_FLAG_ODRDY                  PWR_CSR_ODRDY
-#define PWR_FLAG_ODSWRDY                PWR_CSR_ODSWRDY
-#define PWR_FLAG_UDRDY                  PWR_CSR_UDSWRDY
-/**
-  * @}
-  */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-/**
-  * @}
-  */ 
-  
-/* Exported macro ------------------------------------------------------------*/
-  
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/** @brief Macros to enable or disable the Over drive mode.
-  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
-  */
-#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
-#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
-
-/** @brief Macros to enable or disable the Over drive switching.
-  * @note  These macros can be used only for STM32F42xx/STM3243xx devices. 
-  */
-#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
-#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
-
-/** @brief Macros to enable or disable the Under drive mode.
-  * @note  This mode is enabled only with STOP low power mode.
-  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
-  *        mode is only available when the main regulator or the low power regulator 
-  *        is in low voltage mode.      
-  * @note  If the Under-drive mode was enabled, it is automatically disabled after 
-  *        exiting Stop mode. 
-  *        When the voltage regulator operates in Under-drive mode, an additional  
-  *        startup delay is induced when waking up from Stop mode.
-  */
-#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
-#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
-
-/** @brief  Check PWR flag is set or not.
-  * @note   These macros can be used only for STM32F42xx/STM3243xx devices.
-  * @param  __FLAG__: specifies the flag to check.
-  *         This parameter can be one of the following values:
-  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
-  *                                 is ready 
-  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
-  *                                   switching is ready  
-  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
-  *                                 is enabled in Stop mode
-  * @retval The new state of __FLAG__ (TRUE or FALSE).
-  */
-#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the Under-Drive Ready flag.
-  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
-  */
-#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/* Exported functions --------------------------------------------------------*/
-void              HAL_PWREx_EnableFlashPowerDown(void);
-void              HAL_PWREx_DisableFlashPowerDown(void); 
-HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
-HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
-
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
-void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
-void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
-void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-HAL_StatusTypeDef HAL_PWREx_ActivateOverDrive(void);
-HAL_StatusTypeDef HAL_PWREx_DeactivateOverDrive(void);
-HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-  
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F4xx_HAL_PWR_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/