Stuart Northfield
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_hal_cryp_ex.c
- Revision:
- 384:ef87175507f1
- Parent:
- 383:0564d9840d0d
- Child:
- 385:be64abf45658
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F429ZI/stm32f4xx_hal_cryp_ex.c Mon Nov 03 11:00:07 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,3020 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_cryp_ex.c
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
- * @brief Extended CRYP HAL module driver
- * This file provides firmware functions to manage the following
- * functionalities of CRYP extension peripheral:
- * + Extended AES processing functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The CRYP Extension HAL driver can be used as follows:
- (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
- (##) Enable the CRYP interface clock using __CRYP_CLK_ENABLE()
- (##) In case of using interrupts (e.g. HAL_CRYPEx_AESGCM_Encrypt_IT())
- (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
- (+) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_AES_ECB_Encrypt_DMA())
- (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
- (+++) Configure and enable two DMA streams one for managing data transfer from
- memory to peripheral (input stream) and another stream for managing data
- transfer from peripheral to memory (output stream)
- (+++) Associate the initilalized DMA handle to the CRYP DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the two DMA Streams. The output stream should have higher
- priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
- (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
- (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
- (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
- (##) The encryption/decryption key. Its size depends on the algorithm
- used for encryption/decryption
- (##) The initialization vector (counter). It is not used ECB mode.
- (#)Three processing (encryption/decryption) functions are available:
- (##) Polling mode: encryption and decryption APIs are blocking functions
- i.e. they process the data and wait till the processing is finished
- e.g. HAL_CRYPEx_AESGCM_Encrypt()
- (##) Interrupt mode: encryption and decryption APIs are not blocking functions
- i.e. they process the data under interrupt
- e.g. HAL_CRYPEx_AESGCM_Encrypt_IT()
- (##) DMA mode: encryption and decryption APIs are not blocking functions
- i.e. the data transfer is ensured by DMA
- e.g. HAL_CRYPEx_AESGCM_Encrypt_DMA()
- (#)When the processing function is called at first time after HAL_CRYP_Init()
- the CRYP peripheral is initialized and processes the buffer in input.
- At second call, the processing function performs an append of the already
- processed buffer.
- When a new data block is to be processed, call HAL_CRYP_Init() then the
- processing function.
- (#)In AES-GCM and AES-CCM modes are an authenticated encryption algorithms
- which provide authentication messages.
- HAL_AES_GCM_Finish() and HAL_AES_CCM_Finish() are used to provide those
- authentication messages.
- Call those functions after the processing ones (polling, interrupt or DMA).
- e.g. in AES-CCM mode call HAL_CRYPEx_AESCCM_Encrypt() to encrypt the plain data
- then call HAL_CRYPEx_AESCCM_Finish() to get the authentication message
- (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CRYPEx
- * @brief CRYP Extension HAL module driver.
- * @{
- */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-
-#if defined(STM32F437xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define CRYPEx_TIMEOUT_VALUE 1
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
-static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
-static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout);
-static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout);
-static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
-
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup CRYPEx_Private_Functions
- * @{
- */
-
-/** @defgroup CRYPEx_Group1 Extended AES processing functions
- * @brief Extended processing functions.
- *
-@verbatim
- ==============================================================================
- ##### Extended AES processing functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Encrypt plaintext using AES-128/192/256 using GCM and CCM chaining modes
- (+) Decrypt cyphertext using AES-128/192/256 using GCM and CCM chaining modes
- (+) Finish the processing. This function is available only for GCM and CCM
- [..] Three processing methods are available:
- (+) Polling mode
- (+) Interrupt mode
- (+) DMA mode
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode then
- * encrypt pPlainData. The cypher data are available in pCypherData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *********************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 **************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter *****************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter blocks
- are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, CRYP_KEYSIZE_128B);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /***************************** Header phase *******************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode then
- * encrypt pPlainData. The cypher data are available in pCypherData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode then
- * decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Computes the authentication TAG.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Size: Total length of the plain/cyphertext buffer
- * @param AuthTag: Pointer to the authentication buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint16_t Size, uint8_t *AuthTag, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t headerlength = hcryp->Init.HeaderSize * 8; /* Header length in bits */
- uint32_t inputlength = Size * 8; /* input length in bits */
- uint32_t tagaddr = (uint32_t)AuthTag;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
- {
- /* Change the CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_FINAL;
-
- /* Disable CRYP to start the final phase */
- __HAL_CRYP_DISABLE();
-
- /* Select final phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_FINAL);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Write the number of bits in header (64 bits) followed by the number of bits
- in the payload */
- if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
- {
- CRYP->DR = 0;
- CRYP->DR = __RBIT(headerlength);
- CRYP->DR = 0;
- CRYP->DR = __RBIT(inputlength);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
- {
- CRYP->DR = 0;
- CRYP->DR = __REV(headerlength);
- CRYP->DR = 0;
- CRYP->DR = __REV(inputlength);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
- {
- CRYP->DR = 0;
- CRYP->DR = __REV16(headerlength);
- CRYP->DR = 0;
- CRYP->DR = __REV16(inputlength);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
- {
- CRYP->DR = 0;
- CRYP->DR = (uint32_t)(headerlength);
- CRYP->DR = 0;
- CRYP->DR = (uint32_t)(inputlength);
- }
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the Auth TAG in the IN FIFO */
- *(uint32_t*)(tagaddr) = CRYP->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = CRYP->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = CRYP->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = CRYP->DOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Computes the authentication TAG for AES CCM mode.
- * @note This API is called after HAL_AES_CCM_Encrypt()/HAL_AES_CCM_Decrypt()
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param AuthTag: Pointer to the authentication buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t tagaddr = (uint32_t)AuthTag;
- uint32_t ctraddr = (uint32_t)hcryp->Init.pScratch;
- uint32_t temptag[4] = {0}; /* Temporary TAG (MAC) */
- uint32_t loopcounter;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
- {
- /* Change the CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_FINAL;
-
- /* Disable CRYP to start the final phase */
- __HAL_CRYP_DISABLE();
-
- /* Select final phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_FINAL);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Write the counter block in the IN FIFO */
- CRYP->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- CRYP->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- CRYP->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- CRYP->DR = *(uint32_t*)ctraddr;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the Auth TAG in the IN FIFO */
- temptag[0] = CRYP->DOUT;
- temptag[1] = CRYP->DOUT;
- temptag[2] = CRYP->DOUT;
- temptag[3] = CRYP->DOUT;
- }
-
- /* Copy temporary authentication TAG in user TAG buffer */
- for(loopcounter = 0; loopcounter < hcryp->Init.TagSize ; loopcounter++)
- {
- /* Set the authentication TAG buffer */
- *((uint8_t*)tagaddr+loopcounter) = *((uint8_t*)temptag+loopcounter);
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode then
- * decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *********************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 **************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter *****************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, CRYP_KEYSIZE_128B);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /***************************** Header phase *******************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
-
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
-
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
- }
- else
- {
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, hcryp->Init.KeySize);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
- }
- else
- {
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_INI);
- /* Call Input transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
- }
- else
- {
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode using interrupt
- * then decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, hcryp->Init.KeySize);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t headersize;
- uint32_t headeraddr;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- headersize = hcryp->Init.HeaderSize;
- headeraddr = (uint32_t)hcryp->Init.Header;
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, CRYP_KEYSIZE_128B);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer.
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode using DMA
- * then decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t headersize;
- uint32_t headeraddr;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- headersize = hcryp->Init.HeaderSize;
- headeraddr = (uint32_t)hcryp->Init.Header;
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr, CRYP_KEYSIZE_128B);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- CRYP->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
-
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
-
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH();
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief This function handles CRYP interrupt request.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp)
-{
- switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
- {
- case CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT:
- HAL_CRYPEx_AESGCM_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_GCM_DECRYPT:
- HAL_CRYPEx_AESGCM_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT:
- HAL_CRYPEx_AESCCM_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CCM_DECRYPT:
- HAL_CRYPEx_AESCCM_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA CRYP Input Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable the DMA transfer for input Fifo request by resetting the DIEN bit
- in the DMACR register */
- CRYP->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
-
- /* Call input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP Output Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable the DMA transfer for output Fifo request by resetting the DOEN bit
- in the DMACR register */
- CRYP->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_DISABLE();
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Call output data transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hcryp->State= HAL_CRYP_STATE_READY;
- HAL_CRYP_ErrorCallback(hcryp);
-}
-
-/**
- * @brief Writes the Key in Key registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Key: Pointer to Key buffer
- * @param KeySize: Size of Key
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
-{
- uint32_t keyaddr = (uint32_t)Key;
-
- switch(KeySize)
- {
- case CRYP_KEYSIZE_256B:
- /* Key Initialisation */
- CRYP->K0LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K0RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_192B:
- CRYP->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_128B:
- CRYP->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- CRYP->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief Writes the InitVector/InitCounter in IV registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param InitVector: Pointer to InitVector/InitCounter buffer
- * @param IVSize: Size of the InitVector/InitCounter
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
-{
- uint32_t ivaddr = (uint32_t)InitVector;
-
- switch(IVSize)
- {
- case CRYP_KEYSIZE_128B:
- CRYP->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- CRYP->IV0RR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- CRYP->IV1LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- CRYP->IV1RR = __REV(*(uint32_t*)(ivaddr));
- break;
- /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
- case CRYP_KEYSIZE_192B:
- CRYP->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- CRYP->IV0RR = __REV(*(uint32_t*)(ivaddr));
- break;
- case CRYP_KEYSIZE_256B:
- CRYP->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- CRYP->IV0RR = __REV(*(uint32_t*)(ivaddr));
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief Process Data: Writes Input data in polling mode and read the Output data.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer.
- * @param Ilength: Length of the Input buffer, must be a multiple of 16
- * @param Output: Pointer to the returned buffer
- * @param Timeout: Timeout value
- * @retval None
- */
-static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t i = 0;
- uint32_t inputaddr = (uint32_t)Input;
- uint32_t outputaddr = (uint32_t)Output;
-
- for(i=0; (i < Ilength); i+=16)
- {
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- CRYP->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the Output block from the OUT FIFO */
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = CRYP->DOUT;
- outputaddr+=4;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Sets the header phase
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer.
- * @param Ilength: Length of the Input buffer, must be a multiple of 16
- * @param Timeout: Timeout value
- * @retval None
- */
-static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t loopcounter = 0;
- uint32_t headeraddr = (uint32_t)Input;
-
- /***************************** Header phase *********************************/
- if(hcryp->Init.HeaderSize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(CRYP_PHASE_HEADER);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- for(loopcounter = 0; (loopcounter < hcryp->Init.HeaderSize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(CRYP->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Write the Input block in the IN FIFO */
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- CRYP->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Wait until the complete message has been processed */
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Sets the DMA configuration and start the DMA transfert.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param inputaddr: Address of the Input buffer
- * @param Size: Size of the Input buffer, must be a multiple of 16
- * @param outputaddr: Address of the Output buffer
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
-{
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmain->XferCpltCallback = CRYPEx_GCMCCM_DMAInCplt;
- /* Set the DMA error callback */
- hcryp->hdmain->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
-
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmaout->XferCpltCallback = CRYPEx_GCMCCM_DMAOutCplt;
- /* Set the DMA error callback */
- hcryp->hdmaout->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE();
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&CRYP->DR, Size/4);
-
- /* Enable In DMA request */
- CRYP->DMACR = CRYP_DMACR_DIEN;
-
- /* Enable the DMA Out DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&CRYP->DOUT, outputaddr, Size/4);
-
- /* Enable Out DMA request */
- CRYP->DMACR |= CRYP_DMACR_DOEN;
-}
-
-/**
- * @}
- */
-#endif /* STM32F437xx || STM32F439xx */
-
-#endif /* HAL_CRYP_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
