Diff: targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/TOOLCHAIN_IAR/startup_MKL25Z4.s

Revision:

377:95186f86029b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/TOOLCHAIN_IAR/startup_MKL25Z4.s	Fri Oct 31 13:30:07 2014 +0000
@@ -0,0 +1,213 @@
+/**************************************************
+ *
+ * Copyright 2012 IAR Systems. All rights reserved.
+ *
+ * $Revision: 16 $
+ *
+ **************************************************/
+
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:ROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)                   ; Top of Stack
+        DCD     Reset_Handler           ; Reset Handler
+        DCD     NMI_Handler                   ; NMI Handler
+        DCD     HardFault_Handler             ; Hard Fault Handler
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     SVC_Handler                   ; SVCall Handler
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     PendSV_Handler                ; PendSV Handler
+        DCD     SysTick_Handler               ; SysTick Handler
+        ; External Interrupts
+        DCD     DMA0_IRQHandler               ; 0:  DMA Channel 0 transfer complete intertrupt
+        DCD     DMA1_IRQHandler               ; 1:  DMA Channel 1 transfer complete intertrupt
+        DCD     DMA2_IRQHandler               ; 2:  DMA Channel 2 transfer complete intertrupt
+        DCD     DMA3_IRQHandler               ; 3:  DMA Channel 3 transfer complete intertrupt
+        DCD     0                             ; 4:  Reserved  DMA Channel 5 transfer complete intertrupt
+        DCD     FTFA_IRQHandler               ; 5:  FTFA 
+        DCD     LVD_LVW_IRQHandler                ; 6:  Low-voltage detect, low-voltage warning
+        DCD     LLW_IRQHandler               ; 7:  Low Leakage Wakeup
+        DCD     I2C0_IRQHandler               ; 8:  IIC 0 interrupt
+        DCD     I2C1_IRQHandler               ; 9:  IIC 1 intertrupt
+        DCD     SPI0_IRQHandler               ;10:  SPI0 intertrupt
+        DCD     SPI1_IRQHandler               ;11:  SPI1 intertrupt
+        DCD     UART0_IRQHandler              ;12:  UART 0 status and error intertrupt
+        DCD     UART1_IRQHandler              ;13:  UART 1 status and error intertrupt
+        DCD     UART2_IRQHandler              ;14:  UART 2 status and error intertrupt
+        DCD     ADC0_IRQHandler               ;15:  ADC 0 interrupt
+        DCD     CMP0_IRQHandler               ;16:  CMP 0 interrupt
+        DCD     TPM0_IRQHandler               ;17:  TPM 0 interrupt
+        DCD     TPM1_IRQHandler               ;18:  TPM 1 interrupt
+        DCD     TPM2_IRQHandler               ;19:  TPM 2 interrupt
+        DCD     RTC_IRQHandler          ;20:  RTC Alarm interrupt
+        DCD     RTC_Seconds_IRQHandler                ;21:  RTC Seconds interrupt
+        DCD     PIT_IRQHandler                ;22:  PIT Single interrupt vector for all channels
+        DCD     0                             ;23:  Reserved
+        DCD     USB0_IRQHandler            ;24:  USB OTG intertrupt
+        DCD     DAC0_IRQHandler               ;25:  UART 0 status intertrupt
+        DCD     TSI0_IRQHandler               ;26:  TSI 0 interrupt
+        DCD     MCG_IRQHandler                ;27:  MCG intertrupt
+        DCD     LPTimer_IRQHandler             ;28:  LPTMR0 intertrupt
+        DCD     0                             ;29:  Reserved
+        DCD     PORTA_IRQHandler              ;30:  PORT A interrupt
+        DCD     PORTD_IRQHandler              ;31:  PORT D interrupt
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;Flash Configuration
+;;16-byte flash configuration field that stores default protection settings (loaded on reset)
+;;and security information that allows the MCU to restrict acces to the FTFL module.
+
+BackDoorK0      EQU     0xFF
+BackDoorK1      EQU     0xFF
+BackDoorK2      EQU     0xFF
+BackDoorK3      EQU     0xFF
+BackDoorK4      EQU     0xFF
+BackDoorK5      EQU     0xFF
+BackDoorK6      EQU     0xFF
+BackDoorK7      EQU     0xFF
+
+nFPROT0         EQU     0x00
+FPROT0          EQU     nFPROT0^0xFF
+
+nFPROT1         EQU     0x00
+FPROT1          EQU     nFPROT1^0xFF
+
+nFPROT2         EQU     0x00
+FPROT2          EQU     nFPROT2^0xFF
+
+nFPROT3         EQU     0x00
+FPROT3          EQU     nFPROT3^0xFF
+
+FOPT            EQU     0xFF        
+
+FSEC            EQU     0xFE        
+        SECTION FlashConfig:CONST:REORDER:ROOT(2)
+Config:
+        DATA
+        DCB     BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3
+        DCB     BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7
+        DCB     FPROT0,     FPROT1,     FPROT2,     FPROT3
+        DCB     FSEC,       FOPT,       0xFF,     0xFF 
+        
+        
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+
+      PUBWEAK NMI_Handler
+      PUBWEAK HardFault_Handler
+      PUBWEAK SVC_Handler
+      PUBWEAK PendSV_Handler
+      PUBWEAK SysTick_Handler
+      PUBWEAK DMA0_IRQHandler
+      PUBWEAK DMA1_IRQHandler
+      PUBWEAK DMA2_IRQHandler
+      PUBWEAK DMA3_IRQHandler
+      PUBWEAK FTFA_IRQHandler     
+      PUBWEAK LVD_LVW_IRQHandler      
+      PUBWEAK LLW_IRQHandler     
+      PUBWEAK I2C0_IRQHandler     
+      PUBWEAK I2C1_IRQHandler     
+      PUBWEAK SPI0_IRQHandler     
+      PUBWEAK SPI1_IRQHandler     
+      PUBWEAK UART0_IRQHandler    
+      PUBWEAK UART1_IRQHandler    
+      PUBWEAK UART2_IRQHandler    
+      PUBWEAK ADC0_IRQHandler     
+      PUBWEAK CMP0_IRQHandler     
+      PUBWEAK TPM0_IRQHandler     
+      PUBWEAK TPM1_IRQHandler     
+      PUBWEAK TPM2_IRQHandler     
+      PUBWEAK RTC_IRQHandler
+      PUBWEAK RTC_Seconds_IRQHandler      
+      PUBWEAK PIT_IRQHandler      
+      PUBWEAK USB0_IRQHandler
+      PUBWEAK DAC0_IRQHandler   
+      PUBWEAK TSI0_IRQHandler   
+      PUBWEAK MCG_IRQHandler    
+      PUBWEAK LPTimer_IRQHandler 
+      PUBWEAK PORTA_IRQHandler
+      PUBWEAK PORTD_IRQHandler
+
+      SECTION .text:CODE:REORDER:NOROOT(1)
+      THUMB
+NMI_Handler
+HardFault_Handler
+SVC_Handler
+PendSV_Handler
+SysTick_Handler
+DMA0_IRQHandler
+DMA1_IRQHandler
+DMA2_IRQHandler
+DMA3_IRQHandler
+FTFA_IRQHandler     
+LVD_LVW_IRQHandler      
+LLW_IRQHandler     
+I2C0_IRQHandler     
+I2C1_IRQHandler     
+SPI0_IRQHandler     
+SPI1_IRQHandler     
+UART0_IRQHandler    
+UART1_IRQHandler    
+UART2_IRQHandler    
+ADC0_IRQHandler     
+CMP0_IRQHandler     
+TPM0_IRQHandler     
+TPM1_IRQHandler     
+TPM2_IRQHandler     
+RTC_IRQHandler
+RTC_Seconds_IRQHandler      
+PIT_IRQHandler      
+USB0_IRQHandler
+DAC0_IRQHandler   
+TSI0_IRQHandler   
+MCG_IRQHandler    
+LPTimer_IRQHandler 
+PORTA_IRQHandler
+PORTD_IRQHandler
+Default_Handler
+
+        B Default_Handler
+        END